EDIFIER S2000 Pro Manuel utilisateur

S2000 Pro

Active Monitor Speaker

User manual

Section 1: Important safety instruction

WARNING: To reduce risk of fire or electric shock, do not expose this apparatus to rain or moisture.

Thank you for purchasing Edifier S2000 Pro multimedia speakers. Please read this manual carefully

before operating this system.

1. Read these instructions.

2. Heed all warnings.

3. Follow all instructions.

4. Clean only with dry cloth.

5. Do not use this apparatus near water and never put this apparatus into liquids or allow liquids to

drip or spill onto it.

6. Do not place appliance filled with water on this apparatus, such as vase; nor place any form of

open fire such as lit candle.

7. Do not block any ventilation openings. Please leave enough space around the speakers to

ensure good ventilation (the distance should be above 5cm). Install in accordance with the

manufacturer’s instructions.

8. Do not place near any heat sources such as radiator, heat register, stove, or other apparatus

(including amplifier) that produce heat.

9. Do not disregard the safety purpose of the polarized or grounding-type plug. A polarized plug

has two blades with one wider than the other. A grounding type plug has two blades and a third

grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug

does not fit into your outlet, consult an electrician for replacement of the outlet.

10. Protect the power cord from damage or getting pinched particularly at plugs, receptacles, and

the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Unplug this apparatus during lightning storms or when unused for long periods of time.

13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus is

damaged, such as power supply cord or plug, liquid spilled or objects fallen into the apparatus, the

The exclamation point inside the triangle

is intended to alert the user to the presence

of important operating and maintenance

(servicing) instructions in the literature

accompanying the product.

To prevent the risk of electric shock, do not

remove cover (or back). No user-serviceable

Parts inside. Refer servicing to qualified

Service personnel only.

The lightning flash with arrowhead inside

the triangle, is intended to alert the user

to the presence of un-insulated dangerous

voltage within the product's enclosure

that may be of a sufficient magnitude to

constitute a risk of electric shock to persons.

apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

14. The MAIN plug is used as the disconnecting devices, the disconnecting device shall remain

readily operable.

15. The Maximum ambient temperature is 45° C / 113° F

16. Do not use strong acid, strong alkali and other chemical solvents to clean the product surface.

Please use neutral solvent or water to clean the product.

Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold

with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination

to avoid injury from tip-over.

Correct Disposal of this product. This marking indicates that this product should not be

disposed with other household wastes throughout the EU. To prevent possible harm to the

environment or human health from uncontrolled waste disposal, recycle it responsibly to promote

the sustainable reuse of material resources. To return your used device, please use the return and

collection systems or contact the retailer where the product was purchased. They can take this

product for environmental safe recycling.

This equipment is a Class II or double insulated electrical appliance. It has been designed

in such a way that it does not require a safety connection to electrical earth.

Section 2: In The Box

Box Contents:

3.5mm-RCA audio cable (1.7M / 5.5’)

RCA to RCA audio cable（1.7M / 5.5’）

Speaker connecting cable (5M / 16’)

Fiber optic input cable (1.5M / 5’)

User manual

Passive speaker

Active speaker

Remote control

Section 3: Speaker Controls

1. Master volume control/ input selection

Press in to navigate between audio sources: BAL->AUX->Optical->Coaxial->Bluetooth.

Note: Press and hold the Master volume control to disconnect from Bluetooth devices

2. Treble trimmer

3. Bass trimmer

4. Left Channel of the Balanced

5. Right Channel of the Balanced

6. Power switch

7. Auxiliary input port

8. Optical input port

9. Coaxial input port

10. Connect to passive (left) speaker

11. Power cord

12. Connect to active (right) speaker

13. Display screen

Mode selection:

When switching to Monitor mode: the icon on the display screen blinks once

When switching to Dynamic mode: the icon on the display screen blinks twice

When switching to Classic mode: the icon on the display screen three times

When switching to Vocal mode: the icon on the display screen four times

Section 4: Remote Control

Remote control

1. Remote control indicator

2. Power ON/OFF

3. Mute key

4. Optical input selector

5. Bluetooth input selector

6. Coaxial input selector

7. Auxiliary input selector

8. Balance input selector

9. Monitor mode

10. Dynamic mode

11. Vocal mode

12. Classic mode

13. Volume increase

14. Pause/play (for Bluetooth only)

15. Previous/next track (for Bluetooth only)

16. Volume decrease

Note:

CLASSIC Mode: reproduces a classic HIFI sound.

MONITOR Mode: features a flat audio response curve, for sound with no decoration.

DYNAMIC Mode: more punching, more dynamics.

VOCAL Mode: human voice emphasized, singer's position will be closer to listener.

Section 5:Battery Installation

Section 6: Connections

Note：

1. Install the batteries: take off the remote control battery cover in the direction

of the arrow according to the illustration, and then correctly install two AAA

batteries into the battery compartment.

2. The batteries normally last for about six months. Please replace the batteries

when the remote control becomes insensitive.

3. Do not put the remote control in a place with high moisture or high

temperature.

4. Do not put the remote control under direct sunlight, near a fire or in any high

temperature environment.

5. Do not use old and new batteries together.

6. When the remote control is not in use for long periods, take out the batteries

to prevent damage.

Section 7: Balance Input

1. Press the master volume control on the active speaker or press the “BAL” button on the remote

control to select Balance input.

2. Using XLR compatible cable to connect audio source with the speaker.

3. Play from your device and adjust the volume accordingly.

Tips:

Benefit of using balanced XLR connection is that it can reduce noise and hum from the surroundings.

Section 8:AUX Input

1. Press the master volume control on the active speaker or press the “AUX” button on the remote

control to select AUX input.

2. Using the included audio cable to connect audio sources (mobile phones, tablets etc) to your

speaker.

3. Play from your device and adjust the volume accordingly.

Section 9: Optical and Coaxial Input

1. Press the master volume control on the active speaker or press the “OPT/COX” button on the

remote control to select the optical/coaxial input.

2. Using optical or coaxial cable (optical cable included) to connect audio sources to your

speaker.

3. Play from your devices and adjust the volume accordingly.

Note:

1. In optical and coaxial modes, only PCM signal with 44.1KHz/48KHz/96KHz/192KHz can be

decoded.

Section 10: Bluetooth Input

Pairing

1. Turn on speaker and switch to Bluetooth mode by pressing the Bluetooth button on the remote

control or press the master volume control on back panel of the active speaker.

2. Go to setup section on your source devices (mobile phones, tablets, etc.) and search for nearby

Bluetooth devices, you will find “EDIFIER S2000 Pro”in the list.

3. Pair your device with “EDIFIER S2000 Pro”.

4. Play audio tracks on your device and adjust the volume to a desired level.

Other operations

5 After pairing, using the pair record on your source device to re-connect to the speaker;

6 Bluetooth of the product will be powered off after switching away from Bluetooth mode, so in other

audio mode Bluetooth connection can not be made.

7 When switch to Bluetooth mode, the speaker will try to connect the last connected Bluetooth source

device.

8 To disconnect Bluetooth, press and hold the master volume control for about 2 seconds.

Note:

1. Bluetooth connectivity and compatibility may be different among different source devices,

depending on the software versions of source devices.

2. To enjoy the full Bluetooth functions of this product, please ensure your mobile device

supports A2DP and AVRCP profile.

3. PIN code for connection is “0000” if needed.

Section 11:Specifications

Power output with limited distortion: L/R (treble): 12W+12W

L/R (mid-range and bass): 50W + 50W

Signal to noise ratio dB(A): ≥94 dB(A)

Noise level: ≤25dB(A)

Input sensitivity: Balance input: 700±50mV

Auxiliary input: 600±50mV

Bluetooth input: 350±50mFFs

Optical input: 350±50mFFs

Coaxial input: 350±50 mFFs

Rated sound frequency response range: 48Hz~20KHz

Audio input: Balance/Auxiliary/Optical/Coaxial/Bluetooth

Tweeter unit: Planar diaphragm tweeters

Mid-range and bass driver: 5.5 inch (148mm)

Section 12: Troubleshooting

Problem

Solution

No sound

Check if the power indicator light is ON

Try to turn up the volume using either the master

volume control or remote control.

Ensure the audio cables are firmly connected and

the input is set correctly on the speakers.

Check if there is signal output from the audio

source.

Cannot connect via Bluetooth

Make sure the speaker is switched to Bluetooth

input, in other audio input mode Bluetooth can

not be paired or connected.

Disconnect from any Bluetooth device by press

and hold the volume dial in Bluetooth mode, then

try again.

Effective Bluetooth transmission range is 10

meters, please make sure operation is within the

range.

Try another Bluetooth device for connection.

The S2000DB Pro does not turn on

Check if mains power is connected. or if the wall

outlet is switched on.

If you want to find out more about EDIFIER, please visit our website at www.edifier.com

For Edifier warranty queries, please visit the relevant country page on our www.edifier.com and

review the section Warranty Terms.

Table des matières

Autres manuels EDIFIER Intervenants

EDIFIER

EDIFIER S351DB Manuel utilisateur

EDIFIER

EDIFIER R19BT Manuel utilisateur

EDIFIER

EDIFIER R2000DB Manuel utilisateur

EDIFIER

EDIFIER QR65 Manuel utilisateur

EDIFIER

EDIFIER e3350BT Manuel utilisateur

EDIFIER

EDIFIER R1280T Manuel utilisateur

EDIFIER

EDIFIER R1855DB Manuel utilisateur

EDIFIER

EDIFIER M203BT Manuel utilisateur

EDIFIER

EDIFIER M2300 Manuel utilisateur

EDIFIER

EDIFIER R1700BTs Manuel utilisateur

EDIFIER

EDIFIER Extreme Connect MP260 Manuel utilisateur

EDIFIER

EDIFIER QD35 Manuel utilisateur

EDIFIER

EDIFIER Luna Eclipse Manuel utilisateur

EDIFIER

EDIFIER E25HD Manuel utilisateur

EDIFIER

EDIFIER R1380T Manuel utilisateur

EDIFIER

EDIFIER S880DB Manuel utilisateur

EDIFIER

EDIFIER Eclipse Manuel utilisateur

EDIFIER

EDIFIER M206BT Manuel utilisateur

EDIFIER

EDIFIER S1000DB Manuel utilisateur

EDIFIER

EDIFIER R1380DB Manuel utilisateur

EDIFIER

EDIFIER Extreme Connect MP260 Manuel utilisateur

EDIFIER

EDIFIER P17 Manuel utilisateur

EDIFIER

EDIFIER MP230 Manuel utilisateur

EDIFIER

EDIFIER R1700BT Manuel utilisateur

Manuels Intervenants populaires d'autres marques

argon audio

argon audio IE20 Manuel utilisateur

Denon

Denon SC-N7 Manuel utilisateur

Gemline

Gemline Ace 3952 Manuel utilisateur

Focal

Focal ON WALL 300 Mode d’emploi

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuel utilisateur

SoundLogic

SoundLogic BCCS-6/6395 Manuel utilisateur

Peavey

Peavey DTH 218 Manuel utilisateur

Avantree

Avantree Pluto Air Manuel utilisateur

Morel

Morel Integra Series INTEGRA OVATION 4 Manuel utilisateur

Oppo

Oppo SONICA Manuel utilisateur

Bose

Bose SoundLink Wireless Music System Manuel utilisateur

Rocksteady

Rocksteady Stadium Manuel utilisateur

Bowers & Wilkins

Bowers & Wilkins 4 Manuel utilisateur

Sonance

Sonance SONOS OUTDOOR Series Manuel utilisateur

Electro-Voice

Electro-Voice EVID FM4.2 Manuel utilisateur

Pioneer

Pioneer XW-HTD630 Manuel utilisateur

Onn

Onn BWA16AA002 Manuel utilisateur

HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur