Edgetech 4380 MULTIBEACON Manuel utilisateur

EdgeTech

4 Little Brook Road

West Wareham, MA 02576

Tel: (508) 291-0057

Fax: (508) 291-2491

www.EdgeTech.com

MODEL 4380 MULTIBEACON

U S E R H A R D W A R E M A N U A L

0014296_REV_B December 2014

MODEL 4380 MULTIBEACON 0014296_REV_B

The information, figures, and specifications in this manual are proprietary and are issued in strict

confidence on condition that they not be copied, reprinted, or disclosed to a third party, either wholly or

in part, without the prior, written consent of EdgeTech. Any reproduction of EdgeTech supplied software

or file sharing is strictly prohibited.

Storm Case™ is a trademark of Pelican.

iii

ATTENTION –READ THIS FIRST!

All personnel involved with the installation, operation, or maintenance of the equipment described in this

manual should read and understand the warnings and cautions provided below.

CAUTION!

This equipment contains devices that are extremely sensitive to static

electricity. Therefore, extreme care should be taken when handling them.

Normal handling precautions involve the use of anti-static protection

materials and grounding straps for personnel.

WARNING!

High Voltage may be present in all parts of the system. Therefore, use

caution when the electronics are removed from their containers for

servicing.

CAUTION!

Operation with improper line voltage may cause serious damage to the

equipment. Always ensure that the proper line voltage is used.

MODEL 4380 MULTIBEACON 0014296_REV_B

HARDWARE VARIATIONS AND COMPATIBILITY

The MODEL 4380 MULTIBEACON contains both standard and proprietary hardware. At times, EdgeTech

may change the standard components due to their availability or performance improvements. Although

the component manufacturers—along with their models and styles—may change from unit to unit,

replacement parts will generally be interchangeable.

EdgeTech will make every effort to see that replacement components are interchangeable and use the

same software drivers (if applicable). At times, however, direct replacements may not exist. When this

happens, EdgeTech will provide the necessary drivers with the replacement part, if applicable.

EdgeTech may also change certain hardware per customer requirements. Therefore, portions of this

manual, such as parts lists and test features, are subject to change. These sections should be used for

reference only. When changes are made that affect system operation, they will be explicitly noted. Also,

some options and features may not be active in the customer’s unit at time of delivery. Upgrades will be

made available when these features are implemented.

Contact EdgeTech Customer Service with any questions relating to compatibility.

ABOUT THIS DOCUMENT

We, the employees at EdgeTech, would like to thank you for purchasing MODEL 4380 MULTIBEACON. At

EdgeTech, it is our policy to provide high-quality, cost-effective products and support services that meet

or exceed your requirements. We also strive to deliver them on-time, and to continuously look for ways

to improve them. We take pride in the products we manufacture, and want you to be entirely satisfied

with your equipment.

Purpose of this Manual

The purpose of this manual is to provide the user with information on the setup and use of EdgeTech’s

MODEL 4380 MULTIBEACON. Although this manual encompasses the latest operational features of the

MODEL 4380 MULTIBEACON, some features may be periodically upgraded. Therefore, the information in

this manual is subject to change and should be used for reference only.

Liability

EdgeTech has made every effort to document the MODEL 4380 MULTIBEACON in this manual accurately

and completely. However, EdgeTech assumes no liability for errors or for any damages that result from

the use of this manual or the equipment it documents. EdgeTech reserves the right to upgrade features

of this equipment, and to make changes to this manual, without notice at any time.

Warnings, Cautions, and Notes

Where applicable, warnings, cautions, and notes are provided in this manual as follows:

WARNING!

Identifies a potential hazard that could cause injury or death.

CAUTION!

Identifies a potential hazard that could damage equipment or data.

NOTE: Recommendations or general information that is particular to

the material being presented.

MODEL 4380 MULTIBEACON 0014296_REV_B

WARRANTY STATEMENT

All equipment manufactured by EdgeTech is warranted against defective components and workmanship

for a period of one year after shipment. Warranty repair will be done by EdgeTech free of charge.

Shipping costs are to be borne by the customer. Malfunction due to improper use is not covered in the

warranty, and EdgeTech disclaims any liability for consequential damage resulting from defects in the

performance of the equipment. No product is warranted as being fit for a particular purpose, and there is

no warranty of merchantability. This warranty applies only if:

i. The items are used solely under the operating conditions and in the manner recommended in

Seller's instruction manual, specifications, or other literature.

ii. The items have not been misused or abused in any manner, nor have repairs been attempted

thereon without the approval of EdgeTech Customer Service.

iii. Written notice of the failure within the warranty period is forwarded to Seller and the directions

received for properly identifying items returned under warranty are followed.

iv. The return notice authorizes Seller to examine and disassemble returned products to the extent

Seller deems necessary to ascertain the cause for failure.

The warranties expressed herein are exclusive. There are no other warranties, either expressed or implied,

beyond those set forth herein, and Seller does not assume any other obligation or liability in connection

with the sale or use of said products. Any product or service repaired under this warranty shall be

warranted for the remaining portion of the original warranty period only.

Equipment not manufactured by EdgeTech is supported only to the extent of the original manufacturer's

warranties.

vii

RETURNED MATERI AL AUTHORIZATION

Prior to returning any equipment to EdgeTech, a Returned Material Authorization (RMA) number must be

obtained. The RMA will help us identify your equipment when it arrives at our receiving dock and track

the equipment while it is at our facility. The material should be shipped to the address provided in the

EdgeTech Customer Service section. Please refer to the RMA number on all documents and

correspondences as well.

All returned materials must be shipped prepaid. Freight collect shipments will not be accepted. EdgeTech

will pay freight charges on materials going back to the customer after they have been evaluated and/or

repaired.

CAUTION!

If your product is a portable topside, never attempt to it in its Storm

CaseTM alone. Although rugged, these cases are not intended to be used

as shipping containers, and the delicate internal components could be

damaged if used in this manner.

The following steps apply only to material being returned from outside the Continental United States.

Follow them carefully to prevent delays and additional costs.

1. All shipments must be accompanied by three copies of your proforma invoice, showing the value

of the material and the reason for its return. If the reason is for repair, it must be clearly stated in

order to move through customs quickly and without duties being charged. Whenever possible,

please send copies of original export shipping documents with the consignment.

2. If the value of the equipment is over $1000, the following Shipper's oath must be sent with the

invoice. This oath can be typed on the invoice, or on a separate letterhead:

"I, ______________________________, declare that the articles herein specified are the

growth, produce, or manufacture of the United States; that they were exported from the

United States from the port of _____________________, on or about _______________;

that they are returned without having been advanced in value or improved in condition

by any process of manufacture or any other means; and that no drawback, or allowance

has been paid or admitted hereof."

Signed ______________________________

viii

MODEL 4380 MULTIBEACON 0014296_REV_B

3. If there is more than one item per consignment, a packing list must accompany the shipment. It

is acceptable to combine the proforma invoice and packing list as long as the contents of each

carton are clearly numbered and identified on the invoice.

4. Small items can be shipped prepaid directly to EdgeTech by FedEx, DHL, UPS, Airborne, etc.

5. If the equipment is the property of EdgeTech (formerly EG&G Marine Instruments Division),

please insure for full value.

6. Fax one invoice, packing list, and a copy of the airway bill to EdgeTech upon shipment.

CUSTOMER SERVICE

Customer service personnel at EdgeTech are always eager to hear from users of our products. Your

feedback is welcome, and is a valuable source of information which we use to continually improve these

products. Therefore we encourage you to contact EdgeTech Customer Service to offer any suggestions or

to request technical support:

NOTE: Please have your system Serial Number available when

contacting Customer Service.

E-mail: [email protected]om

Mail: 4 Little Brook Road

West Wareham, MA 02576

Telephone: (508) 291-0057

Facsimile: (508) 291-2491

24-Hour Emergency

Technical Support Line: (508) 942-8043

For more information please go to www.EdgeTech.com.

MODEL 4380 MULTIBEACON 0014296_REV_B

COMPANY BACKGROUND

EdgeTech (formerly EG&G Marine Instruments) traces its history in underwater data acquisition and

processing back to 1966. EdgeTech has designed, developed, and manufactured products, instruments,

and systems—for the acquisition of underwater data, including marine, estuarine, and coastal

applications—for over 45 years.

The company has responded to the needs of the scientific, Naval, and offshore communities by providing

equipment—such as sub-bottom profilers, side scan sonar, acoustic releases, USBL positioning systems,

and bathymetric systems—that have become standards in the industry.

EdgeTech has also consistently anticipated and responded to future needs through an active research and

development program. Current efforts are focused on the application of cutting-edge CHIRP and acoustic

technology.

Table des matières

Autres manuels Edgetech Équipement marin

Edgetech

Edgetech 4200-FS Manuel utilisateur

Edgetech

Edgetech 701 DIGITAL LINK Manuel utilisateur

Edgetech

Edgetech 4125I Manuel utilisateur

Edgetech

Edgetech 8242XS Manuel utilisateur

Edgetech

Edgetech 2050-DSS Manuel utilisateur

Edgetech

Edgetech 3100 Manuel utilisateur

Edgetech

Edgetech 6205S2 Manuel utilisateur

Edgetech

Edgetech 3200-XS Manuel utilisateur

Edgetech

Edgetech 2300 Manuel utilisateur

Edgetech

Edgetech 3400 Manuel utilisateur

Edgetech

Edgetech STARMUX IV Manuel utilisateur

Edgetech

Edgetech STARMUX IV Manuel utilisateur

Edgetech

Edgetech Model 3100P Sub-bottom Sonar System Manuel utilisateur

Edgetech

Edgetech Port Pop-Up Manuel utilisateur

Edgetech

Edgetech 3300 Manuel utilisateur

Edgetech

Edgetech 3200-XS Manuel utilisateur

Edgetech

Edgetech 8011M Manuel utilisateur

Edgetech

Edgetech 3400 Manuel utilisateur

Manuels Équipement marin populaires d'autres marques

Clarion

Clarion CMS2 Manuel de réparation

EBS

EBS M7000 Manuel utilisateur

Kongsberg

Kongsberg M3 Bathy Manuel utilisateur

NPK

NPK SCS-1002 Manuel utilisateur

Furuno

Furuno FE-800 Manuel utilisateur

Harken

Harken 1561 Manuel utilisateur

Simrad

Simrad DD15 Manuel utilisateur

Notifier

Notifier FS-BSO Manuel utilisateur

Raymarine

Raymarine ST40 Manuel utilisateur

E2S

E2S E2XS112UL Manuel utilisateur

R2Sonic

R2Sonic 2026 Manuel utilisateur

COBHAM

COBHAM SAILOR 6000 Manuel utilisateur

Clarion

Clarion GR10BT Manuel de réparation

Raymarine

Raymarine Maxiview ST80 Guide de l'utilisateur

GUIDANCE MARINE

GUIDANCE MARINE 20- Series Instructions de montage

Raymarine

Raymarine ST60 Tridata Guide de l'utilisateur

olympia electronics

olympia electronics ΒS-531/1/MAR Manuel utilisateur

Sonic

Sonic 2024 Manuel utilisateur