Edge Electrons EDGEIQ EE-202-0050 Mode d’emploi

INSTALL THE

WORLD’S BEST

VOLTAGE

OPTIMISATION

TECHNOLOGY

EDGEIQ

I N S T A L L A T I O N,

C O M M I S S I O N I N G A N D

O P E R A T I O N M A N U A L

EE-202-0050 SINGLE PHASE SERIES

E D G E I Q H A N D B O O K

I. T A B L E O F C O N T E N T S......................................................................................................................2

II. I N S T R U C T I O N S A N D W A R N I N G S ...........................................................................................3

1. W A R N I N G S.........................................................................................................................................3

1.1. Voltage.................................................................................................................................................3

1.2. Safety...................................................................................................................................................3

1.3. Location ...............................................................................................................................................3

1.4. Wiring...................................................................................................................................................4

1.5. Edge Electrons ...................................................................................................................................5

2. ‘M U S T G E T’ I N F O R M A T I O N .................................................................................................6

2.1. For the customer to register their unit.............................................................................................6

2.2. Electrical contractor ...........................................................................................................................6

2.3. Photographs/Video required ............................................................................................................6

3. I N S T A L L A T I O N ‘ M U S T D O ‘ S ’...........................................................................................7

4. E Q U I P M E N T A N D P A C K A G I N G........................................................................................8

4.1. Front case labelling............................................................................................................................8

4.2. Dimensions .........................................................................................................................................8

4.3. Packing list..........................................................................................................................................9

5. I N S T A L L I N G T H E E D G E I Q ................................................................................................10

5.1. Mounting: Indoor/outdoor use, IP54 enclosure ...........................................................................10

5.2. Wiring the EdgeIQ............................................................................................................................12

5.3. Conduit fitting....................................................................................................................................13

5.4. Power connection to main switchboard........................................................................................14

5.5. Solar inverter current transformer (CT) connection (where applicable) ..................................17

5.6. Communication kit installation .......................................................................................................17

6. A T T A C H S A F E T Y L A B E L S.................................................................................................19

6.1. Place Label 1 and Label 2 on the front cover of the EdgeIQ unit.............................................19

7. A P P E N D I X A : P R O D U C T I N F O R M A T I O N................................................................20

8. A P P E N D I X B : C O M M I S S I O N I N G C H E C K L I S T ....................................................21

9. A P P E N D I X C : E D G E I Q L E D S T A T U S I N D I C A T O R S..................................28

I. T A B L E O F C O N T E N T S

E D G E I Q H A N D B O O K

II. I N S T R U C T I O N S A N D W A R N I N G S

BEFORE commencing installation or commissioning, please read completely through this manual

and follow all warning statements. This manual contains important information. Failure to read and

follow all instructions prior to performing the installation and operation will void the product warranty and

could also cause serious personal injury, fire hazards and electric shock, which may lead to death. After

installation and commissioning, this manual must be made available for future operation and maintenance.

EdgeIQ products are designed and tested to meet all applicable Australian and New Zealand safety

standards (AS/NZS). Safety precautions must be observed and followed during installation and operation

to: (i) Eliminate the risk of personal injury and (ii) Ensure safe installation, as with all electrical and

electronic equipment.

1. W A R N I N G S

1.1. Voltage

Dangerous high voltages are present within the EdgeIQ unit which must be avoided and may result in

death or serious injury, so installation, commissioning, service and maintenance of EdgeIQ products must

only be performed by trained, qualified and authorised personnel who are licenced to all local applicable

standards, certifications and regulations. Means for complete electrical isolation of the device (for safe

installation, operation and maintenance) must be incorporated in accordance with the wiring standards.

Do not use EdgeIQ on circuits exceeding the specified voltage.

1.2. Safety

To prevent electrical shock and/or equipment damage, securely isolate the incoming power supply to

the installation at the main fuse or circuit breaker box until installation is complete. Children should be

supervised to ensure that they do not play with the product. This product is not intended for use by

persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience

and knowledge, unless they have been given supervision or instruction concerning use of the product

by a person responsible for their safety.

1.3. Location

• The EdgeIQ must have MINIMUM CLEARANCE around the unit (to ensure efficient performance)

as shown in Diagram 2: Minimum clearance location for EdgeIQ on page 12. Fan outlets and side

exhaust vents on the EdgeIQ unit must ALWAYS remain clear and free of obstruction

• Check the expected ambient temperature range of the selected location for the EdgeIQ unit

• Will the EdgeIQ unit be exposed to moisture and/or excessive dust?

• Any other visible hazards at the location?

E D G E I Q H A N D B O O K

1.4. Wiring

1.4.1. Single phase, two phase and three phase installation

This single phase EdgeIQ unit MUST be installed according to the type of supply available on

the installation and whether a single phase solar inverter or single phase battery inverter is part of

the installation or not.

This manual provides specific wiring instructions for installations that have a single phase supply

only.

Note: If your installation has a two phase supply, three phase supply or battery inverter, we

recommend you contact your Edge Electrons representative to discuss alternatives.

1.4.2.Termination to the unit internal breaker rating

1.4.3. WARNING: Do NOT install EdgeIQ on installations with three phase OR two phase supply as this can

UNBALANCE the voltages and cause damage to the installation or appliances on the installation. Three

phase Edge IQ is available with a 3 phase adaptor, please contact customersupport@edgeeletrons.com

for further support.

E D G E I Q H A N D B O O K

1.5. Edge Electrons

WARNING

Edge Electrons manufacture component parts that can be used in a wide

variety of industrial and commercial

applications. The selection and

application of Edge Electrons products remains the responsibility of the

equipment designer or end user. Edge Electrons accepts no responsibility

for how its products may be incorporated into final design. Under no

circumstance should any Edge Electrons product be incorporated into any

product or design as the exclusive or sole safety control, all controls should

be designed to dynamically fault detect and fail safel

y under all

circumstances. Any warning provided by Edge Electrons must be passed

through to the end user. Edge Electrons offers a warranty only as to the

quality of its product to conform to the catalogue specifications. No other

warranty is offered. Edge Electrons assumes no liability for any personal

injury, property damage, losses or claims arising out of the misapplication

and non-performance.

E D G E I Q H A N D B O O K

2. ‘M U S T G E T’ I N F O R M A T I O N

Electrical contractor must complete the below information and return this page to Edge Electrons at

customersupport@edgeelectrons.com as soon as possible after commissioning the unit. Receipt by Edge is

required to validate the Edge Electrons product warranty.

2.1. For the customer to register their unit

a) Has the unit been commissioned with the EdgeConnected installer app?

Apple:

https://apps.apple.com/au/app/edgeconnected/id1465549819

Android:

https://play.google.com/store/apps/details?id=com.edgeconnected.installer&hl=en_AU

2.2. Electrical contractor

a) Has the customer been informed a shutdown will be required for installation?

b) A Certificate of Electrical Safety will be provided to the customer?

c) Has a positive communication been established for the unit, prior to leaving

customer site?

(See Commission Checklist – Section D for how to check for this)

2.3. Photographs/Video required

a) Main switchboard internal and external, including circuit breaker panel

b) Existing solar equipment installed

c) Proposed and actual location of install and breaker location (Need ‘before and after’, including

main switchboard)

d) Photos of general hazards and/or access hazards relevant to the install – e.g. Gas outlets

Note: Should you consider a problem with the EdgeIQ unit installed, please take videos/photos to

explain the issue and include in the Return Merchandise Authorisation form. No provision of

video/photo explanation of the issue is likely to impact the warranty.

Electrical contractor details

Name:

Phone:

Email:

Business address:

Licence number:

E D G E I Q H A N D B O O K

3. I N S T A L L A T I O N ‘ M U S T D O ‘ S ’

Existing sub-mains and all final sub-circuit cabling is adequate for the site (AS/NZS 3000 and AS/NZS 3008)

Perform a fault loop impedance test and earth fault loop impedance test

EdgeIQ is ideally mounted as close to the main switchboard as possible (to not increase the

impedance on the installation

EdgeIQ is mounted vertically on a solid substrate in accordance with the clearances noted in

Diagram 2 Minimum clearance location for EdgeIQ with all cable entries bottom or rear entry only

This single phase EdgeIQ unit can only be wired/connected to a single phase installation.

All cabling is adequately “mechanically protected” – this means conduit and / or protective enclosure.

All weather proof glands or conduit entries are correctly sealed.

All power cabling is tested for continuity, polarity and insulation resistance and then terminals are

correctly tightened – double-check by pulling on the wires

The current transformer (CT) is correctly closed and connected to the AC cable supplying the solar

inverter (where applicable) with the arrow of the CT pointing in the direction of the current flow

All covers are replaced, all labels are placed where advised

Installation is re-energised

Perform handover to customer – including supply of Certificate of Electrical Safety

Complete ‘Must get’ information (See page 6) and email to Edge Electrons

(customersupport@edgelectrons.com). Non-receipt of this information can impact the product

warranty

Site monitoring

A ‘transformer tap’ change request to the customer’s Distributor is undertaken by the customer when

grid voltage is measured above 265V (at the customer’s point of attachment).

E D G E I Q H A N D B O O K

4. E Q U I P M E N T A N D P A C K A G I N G

4.1. Front case labelling

4.2. Dimensions

Mounting slot

LED indicator

Antenna

Vents

Terminal box and cover

Table des matières

Manuels Contrôleurs populaires d'autres marques

Digiplex

Digiplex DGP-848 Mode d'emploi

YASKAWA

YASKAWA SGM series Manuel utilisateur

Sinope

Sinope Calypso RM3500ZB Manuel utilisateur

Isimet

Isimet DLA Series Style 2 Manuel d'installation

LSIS

LSIS sv-ip5a Manuel utilisateur

Rockwell Automation

Rockwell Automation 1769-L31 Manuel utilisateur

Airflow

Airflow Uno hab Manuel utilisateur

ABB

ABB ACS580-01 drives Manuel utilisateur

Panasonic

Panasonic GM1 Series Manuel utilisateur

Emerson

Emerson SW93 Manuel utilisateur

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuel utilisateur

Panasonic

Panasonic FP? Positioning Unit RTEX Manuel utilisateur

Samson

Samson Type 5824 Manuel de service

Alpha IP

Alpha IP MIOB 21001 Manuel utilisateur

Siemens

Siemens OpenAir GMA 1 Series Manuel utilisateur

Surecom

Surecom SR-629 Manuel utilisateur

Fishman

Fishman TriplePlay Manuel utilisateur

Regulus

Regulus SRS1 T Manuel utilisateur