Edelbrock 2810 Manuel utilisateur

Rev. 2/04 - RS/mc

Catalog #2810/#2811

Brochure # 63-0257

Victor Intake Manifold for 400-455 c.i.d. Olds V8

Operating Range: 4000-7500 RPM

Catalog #2810 & #2811

INSTALLATION INSTRUCTIONS

Please study these instructions carefully before installing your new Edelbrock Victor Intake Manifold for 400-455 c.i.d.

Oldsmobile V8. If you have any questions or problems, do not hesitate to contact our Technical Hotline

at:

1-800-416-8628, from 7 am - 5 pm Pacific Standard Time, Monday-Friday, or via e-mail at: [email protected].

•Description: This manifold is designed for competition vehicles ONLY, and is not intended to be used on the street, as it

does not have provisions for chokes, emissions pieces, etc. It is designed for Olds 400-455 c.i.d. competition engines,

using stock cast iron, or Edelbrock Performer RPM aluminum cylinder heads. Port exit size is 2.22” x 1.28”, with enough

material to allow porting to match larger port openings, if desired. Two versions are available; Part #2810 uses standard

flange, 850 cfm carburetors, and Part #2811 is for 4500 series carburetors. Both models are suitable for drag racing

(Super Stock, Super Gas, Super Comp, Brackets, etc.), marine or any application requiring maximum power up to 7500

rpm. The manifold carburetor pad height (A/B height) is 8.2”, and will not fit under most stock hoods.

•Port Matching: For maximum performance, we recommend port/gasket matching the port exits to the cylinder head.

The manifold is tapered in the last 1.5” of the runners to stock as-cast port exit size.

•Carburetor Recommendations: Use an appropriate racing carburetor or the accepted carburetor for your racing class.

•Intake Gasket: Use Mr. Gasket Part #404, or contact Mondello Performance at (805) 237-8808 for correct gasket kit.

•Carburetor Spacers: Some applications may benefit from the use of a one-inch open carburetor spacer, such as

Edelbrock Part #8710 (standard flange carburetors with Part #2810), or Part #8718 (cloverleaf spacer for 4500 series

carburetors with Part #2811). This normally requires slight recalibration of the carburetor since small losses of fuel signal

cause the engine to run somewhat leaner than without the spacer. A simple jet change is typically all that needs to be

done.

PLEASE complete and mail your warranty card. Be sure to write the model number in the “Part #____” space. THANK YOU.

Edelbrock Corporation • 2700 California St.

Torrance, CA 90503 • Tech Line: 1-800-416-8628

Office: (310) 781-2222 • E-Mail: [email protected]

Intake Manifold Tightening Sequence

Tighten All Manifold Bolts to 25 ft./lbs.

1 368

4572

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Edelbrock Pièce automobile

Edelbrock

Edelbrock 2760 Manuel utilisateur

Edelbrock

Edelbrock 6560 Manuel utilisateur

Edelbrock

Edelbrock Victor Glidden 18 2858 Manuel d'exploitation et d'entretien

Edelbrock

Edelbrock 66162 Manuel utilisateur

Edelbrock

Edelbrock 72950 Manuel utilisateur

Edelbrock

Edelbrock Square-Bore Carb 2696 Manuel utilisateur

Edelbrock

Edelbrock Performer Multipoint 3501 Document technique

Edelbrock

Edelbrock 68712 Manuel utilisateur

Edelbrock

Edelbrock 7111 Manuel utilisateur

Edelbrock

Edelbrock 65932 Manuel utilisateur

Edelbrock

Edelbrock 3871 Manuel utilisateur

Edelbrock

Edelbrock 2838 Manuel utilisateur

Edelbrock

Edelbrock 68642 Manuel utilisateur

Edelbrock

Edelbrock CHEVROLET V8 302-400 C.I.D. Manuel utilisateur

Edelbrock

Edelbrock Performer 1403 Manuel utilisateur

Edelbrock

Edelbrock 36011 Manuel utilisateur

Edelbrock

Edelbrock 2886 Manuel utilisateur

Edelbrock

Edelbrock Russell R08364 Manuel utilisateur

Edelbrock

Edelbrock 17930 Manuel utilisateur

Edelbrock

Edelbrock Torker II 5081 Manuel utilisateur

Edelbrock

Edelbrock Pro-Flo 3 Manuel utilisateur

Edelbrock

Edelbrock VICTOR 8841 Manuel d'instructions

Edelbrock

Edelbrock 6692 Manuel utilisateur

Edelbrock

Edelbrock 6893 Manuel utilisateur

Manuels Pièce automobile populaires d'autres marques

Dakota Digital

Dakota Digital 650277 Manuel utilisateur

bosal

bosal 037031 Manuel utilisateur

Vintage Air

Vintage Air 571063 Manuel utilisateur

GFB

GFB EX38 Manuel utilisateur

bosal

bosal 028091 Manuel utilisateur

Dodge

Dodge 8W-43 Guide de démarrage rapide

ICI

ICI Magnum FBM10DGN Manuel utilisateur

Volant Perfomance

Volant Perfomance 19435 Manuel utilisateur

BENDIX

BENDIX GEN 4 GEN 5 ABS Manuel utilisateur

Vintage Air

Vintage Air 571065 Manuel utilisateur

Rugged Ridge

Rugged Ridge 11503.13 Manuel utilisateur

BENDIX

BENDIX CYCLONE DURADRAIN TRAILER WATER Manuel utilisateur

Porsche

Porsche 968 - ASSEMBLY INSPECTION PROCEDURE AND MAINTENANCE... Mode d’emploi

Sumitomo

Sumitomo FINE CYCLO FC-A 15 G Manuel utilisateur

Toshiba

Toshiba 48-1250 A Manuel utilisateur

aldes

aldes EHT2 Manuel utilisateur

Go Rhino

Go Rhino 24371T Manuel utilisateur

BBK

BBK 18950 Manuel utilisateur