EDA ED-HMI2120-101C Manuel utilisateur

ED-HMI2120-101C

10.1 inch High Reliability Industrial

Panel PC Based on Raspberry Pi

CM4

User Manual

EDA Technology Co., LTD

August 2023

Thank you very much for purchasing and using our products, and we will serve

you wholeheartedly.

As one of the global design partners of Raspberry Pi, we are committed to

providing hardware solutions for IOT, industrial control, automation, green

energy and artificial intelligence based on Raspberry Pi technology platform.

You can contact us in the following ways:

EDA Technology Co.,LTD

Address:Room 301, Building 24, No.1661 Jialuo Road, Jiading District,

Shanghai

Mail: [email protected]

Phone: +86-18217351262

Website: https://www.edatec.cn

Technical Support:

Mail: [email protected]

Phone: +86-18627838895

Wechat: zzw_1998-

ED-HMI2120-101C and its related intellectual property rights are owned by EDA

Technology Co.,LTD.

EDA Technology Co.,LTD owns the copyright of this document and reserves all

rights. Without the written permission of EDA Technology Co.,LTD, no part of

this document may be modified, distributed or copied in any way or form.

Disclaimer

EDA Technology Co.,LTD does not guarantee that the information in this manual

is up to date, correct, complete or of high quality. EDA Technology Co.,LTD also

does not guarantee the further use of this information. If the material or non-

material related losses are caused by using or not using the information in this

manual, or by using incorrect or incomplete information, as long as it is not

proved that it is the intention or negligence of EDA Technology Co.,LTD, the

liability claim for EDA Technology Co.,LTD can be exempted. EDA Technology

Co.,LTD expressly reserves the right to modify or supplement the contents or

part of this manual without special notice.

Foreword

Related Manuals

All kinds of product documents contained in the product are shown in the following table, and users can

choose to view the corresponding documents according to their needs.

Documents Instruction

ED-HMI2120-101C Datasheet

This document introduces the product features, software and

hardware specifications, dimensions and ordering code of

ED-HMI2120-101C to help users understand the overall system

parameters of the products.

ED-HMI2120-101C User Manual

This document introduces the appearance, installation, startup

and configuration of ED-HMI2120-101C to help users use the

product better.

ED-HMI2120-101C Application Guide

This document introduces the OS download, eMMC flashing and

partial configuration of ED-HMI2120-101C to help users use the

product better.

Users can visit the following website for more information:

https://www.edatec.cn

Reader Scope

This manual is applicable to the following readers:

Mechanical Engineer

Electrical Engineer

Software Engineer

System Engineer

Related Agreement

Terminology Convention

Terminology Meaning

CM4 Raspberry Pi CM4 Module, Full name is Compute Module 4

Symbolic Convention

Symbolic Instruction

Prompt symbols, indicating important features or operations.

Notice symbols, which may cause personal injury, system damage, or signal interruption/loss.

May cause great harm to people.

iii

Safety Instructions

This product should be used in an environment that meets the requirements

of design specifications, otherwise it may cause failure, and functional

abnormality or component damage caused by non-compliance with relevant

regulations are not within the product quality assurance scope.

Our company will not bear any legal responsibility for personal safety

accidents and property losses caused by illegal operation of products.

Please do not modify the equipment without permission, which may cause

equipment failure.

When installing equipment, it is necessary to fix the equipment to prevent it

from falling.

If the equipment is equipped with an antenna, please keep a distance of at

least 20cm from the equipment during use.

Do not use liquid cleaning equipment, and keep away from liquids and

flammable materials.

This product is only supported for indoor use.

Content

Foreword .....................................................................................................................................................i

Related Manuals ..................................................................................................................................i

Reader Scope ......................................................................................................................................i

Related Agreement .............................................................................................................................ii

Terminology Convention...............................................................................................................ii

Symbolic Convention ...................................................................................................................ii

Safety Instructions..................................................................................................................................... iii

1Product Description......................................................................................................................... 1-1

1.1 Overview........................................................................................................................... 1-2

1.2 Packing List ...................................................................................................................... 1-3

1.3 Appearance ...................................................................................................................... 1-4

1.3.1 Front Panel ................................................................................................................ 1-4

1.3.2 Rear Panel................................................................................................................. 1-5

1.3.3 Side Panel ................................................................................................................. 1-5

1.4 Button ............................................................................................................................... 1-8

1.5 Indicator ............................................................................................................................ 1-9

1.6 Interface.......................................................................................................................... 1-10

1.6.1 Card Slot.................................................................................................................. 1-10

1.6.2 Power Supply Interface............................................................................................ 1-10

1.6.3 Audio Interface..........................................................................................................1-11

1.6.4 RS485/RS232 Interface............................................................................................1-11

1.6.5 1000M Ethernet Interface ........................................................................................ 1-13

1.6.6 100M Ethernet Interface .......................................................................................... 1-14

1.6.7 HDMI Interface......................................................................................................... 1-14

1.6.8 USB 2.0 Interface .................................................................................................... 1-15

1.6.9 Micro USB Interface................................................................................................. 1-15

1.6.10 Antenna Interface .................................................................................................... 1-15

2Installing Components..................................................................................................................... 2-1

2.1 Installing Antenna (optional).............................................................................................. 2-2

2.2 Installing Micro SD Card ................................................................................................... 2-3

2.3 Installing Nano SIM Card (optional) .................................................................................. 2-4

3Installing Device .............................................................................................................................. 3-1

3.1 Embedded Installation ...................................................................................................... 3-2

4Booting The Device......................................................................................................................... 4-1

4.1 Connecting Cables............................................................................................................ 4-2

4.2 Booting The System For The First Time............................................................................ 4-3

4.2.1 Raspberry Pi OS (Desktop) ....................................................................................... 4-3

4.2.2 Raspberry Pi OS (Lite)............................................................................................... 4-3

5Configuring System......................................................................................................................... 5-1

5.1 Finding Device IP.............................................................................................................. 5-2

5.1.1 Query IP by Using ifconfig Command........................................................................ 5-2

5.1.2 Login Router to Query IP ........................................................................................... 5-2

5.1.3 Scan For Using NMAP Tool ....................................................................................... 5-3

5.2 Remote Login ................................................................................................................... 5-5

5.2.1 Connecting To The Device Via SSH .......................................................................... 5-5

5.2.2 Connecting To The Device Desktop Through VNC .................................................... 5-7

5.3 Configuring Storage Devices .......................................................................................... 5-10

5.3.1 Mounting a Storage Device ..................................................................................... 5-10

5.3.2 Unmounting The Storage Device............................................................................. 5-12

5.3.3 Set The Storage Device To Mount Automatically ..................................................... 5-12

5.4 Configuring Ethernet IP................................................................................................... 5-14

5.4.1 Configuring IP by Using The NetworkManager Tool ................................................ 5-14

5.4.2 Configuring IP by Using The dhcpcd Tool ................................................................ 5-17

5.5 Configuring WiFi (Optional)............................................................................................. 5-19

5.5.1 Enabling WiFi Function............................................................................................ 5-19

5.5.2 Using The NetworkManager Tool To Configure WiFi Connections........................... 5-21

5.5.3 Configuring WiFi Connection By Using dhcpcd Tool................................................ 5-23

5.6 Configuring Bluetooth (optional) ..................................................................................... 5-25

5.6.1 Basic Configuration Command ................................................................................ 5-25

5.6.2 Configuration Example ............................................................................................ 5-25

5.7 Configuring 4G (Optional) ............................................................................................... 5-27

5.7.1 Using The NetworkManager Tool To Configure The Network .................................. 5-27

5.7.2 Configuring The Network By Using The dhcpcd Tool............................................... 5-28

5.7.3 Configuring 4G Module Reset.................................................................................. 5-29

5.8 Configuring Buzzer ......................................................................................................... 5-31

5.9 Configuring RTC ............................................................................................................. 5-32

5.10 Configuring Serial Port.................................................................................................... 5-33

5.10.1 Installing picocom tool ............................................................................................. 5-33

5.10.2 Configuring RS232 .................................................................................................. 5-33

5.10.3 Configuring RS485 .................................................................................................. 5-33

5.11 Configuring Audio............................................................................................................ 5-35

5.11.1 Adjusting The Volume.............................................................................................. 5-35

5.11.2 Configuring Record.................................................................................................. 5-37

5.12 Configuring USER Indicator............................................................................................ 5-39

5.13 Configuring LCD Screen ................................................................................................. 5-40

5.13.1 Rotating Orientation................................................................................................. 5-40

5.13.2 Adjusting Brightness ................................................................................................ 5-41

5.14 Configuring Camera........................................................................................................ 5-43

1 Product Description

ED-HMI2120-101C User Manual 1-1

1 Product Description

This chapter introduces the product overview, packing list, appearance, button, indicators and

interfaces.

Overview

Packing List

Appearance

Button

Indicator

Interface

Table des matières

Manuels Écran tactile populaires d'autres marques

FlowLine

FlowLine Data loop Manuel utilisateur

ALPEX

ALPEX AEx-8 P Series Manuel utilisateur

Ltech

Ltech E5S Manuel utilisateur

Harman

Harman AMX MODERO S MSD-701-L2 Manuel utilisateur

Acnodes

Acnodes PC 1150 Manuel utilisateur

AIS

AIS IP10IA99 series Manuel utilisateur

IBASE Technology

IBASE Technology ASTUT-152-RE1S Manuel utilisateur

YASKAWA

YASKAWA TP 610C Manuel utilisateur

B&R

B&R Power Panel C Series Manuel utilisateur

Beijer Electronics

Beijer Electronics X2 control Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT321W-521 Manuel utilisateur

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Manuel utilisateur

Qomo

Qomo QIT1386 Manuel utilisateur

DFI

DFI KS104-CD Manuel utilisateur

AMX

AMX AXP-PPC Mode d’emploi

Sartorius

Sartorius X3 PR 5410 Manuel utilisateur

AMX

AMX Modero X Series Manuel utilisateur

Advantech

Advantech TPC-30 Series Manuel utilisateur