EDA ED-IPC2100 Series Manuel utilisateur

ED-IPC2100 Series

High Reliability Industrial

Computer Based On Raspberry Pi

CM4

User Manual

EDA Technology Co., LTD

July 2023

Thank you very much for purchasing and using our products, and we will serve

you wholeheartedly.

As one of the global design partners of Raspberry Pi, we are committed to

providing hardware solutions for IOT, industrial control, automation, green

energy and artificial intelligence based on Raspberry Pi technology platform.

You can contact us in the following ways:

EDA Technology Co.,LTD

Address:Room 301, Building 24, No.1661 Jialuo Road, Jiading District,

Shanghai

Mail: [email protected]n

Phone: +86-18217351262

Website: https://www.edatec.cn

Technical Support:

Mail: [email protected]

Phone: +86-18627838895

Wechat: zzw_1998-

ED-IPC2100 series and its related intellectual property rights are owned by EDA

Technology Co.,LTD.

EDA Technology Co.,LTD owns the copyright of this document and reserves all

rights. Without the written permission of EDA Technology Co.,LTD, no part of

this document may be modified, distributed or copied in any way or form.

Disclaimer

EDA Technology Co.,LTD does not guarantee that the information in this manual

is up to date, correct, complete or of high quality. EDA Technology Co.,LTD also

does not guarantee the further use of this information. If the material or non-

material related losses are caused by using or not using the information in this

manual, or by using incorrect or incomplete information, as long as it is not

proved that it is the intention or negligence of EDA Technology Co.,LTD, the

liability claim for EDA Technology Co.,LTD can be exempted. EDA Technology

Co.,LTD expressly reserves the right to modify or supplement the contents or

part of this manual without special notice.

Foreword

Related Manuals

All kinds of product documents contained in the product are shown in the following table, and users can

choose to view the corresponding documents according to their needs.

Documents Instruction

ED-IPC2100 Series Datasheet

This document introduces the product features, software and

hardware specifications, dimensions and ordering code of ED-

IPC2100 series to help users understand the overall system

parameters of the products.

ED-IPC2100 Series User Manual

This document introduces the appearance, installation, startup

and configuration of ED-IPC2100 series to help users use the

product better.

ED-IPC2100 Series Application Guide

This document introduces the OS download, eMMC flashing and

partial configuration of ED-IPC2100 series to help users use the

product better.

Users can visit the following website for more information:

https://www.edatec.cn

Reader Scope

This manual is applicable to the following readers:

Mechanical Engineer

Electrical Engineer

Software Engineer

System Engineer

Related Agreement

Terminology Convention

Terminology Meaning

CM4 Raspberry Pi CM4 Module,Full name is Compute Module 4

Symbolic Convention

Symbolic Instruction

Prompt symbols, indicating important features or operations.

Notice symbols, which may cause personal injury, system damage, or signal interruption/loss.

May cause great harm to people.

iii

Safety Instructions

This product should be used in an environment that meets the requirements

of design specifications, otherwise it may cause failure, and functional

abnormality or component damage caused by non-compliance with relevant

regulations are not within the product quality assurance scope.

Our company will not bear any legal responsibility for personal safety

accidents and property losses caused by illegal operation of products.

Please do not modify the equipment without permission, which may cause

equipment failure.

When installing equipment, it is necessary to fix the equipment to prevent it

from falling.

If the equipment is equipped with an antenna, please keep a distance of at

least 20cm from the equipment during use.

Do not use liquid cleaning equipment, and keep away from liquids and

flammable materials.

This product is only supported for indoor use.

Content

Contact Us .................................................................................................................................................ii

Copyright Statement.................................................................................................................................. iii

Disclaimer .................................................................................................................................................iv

Foreword .....................................................................................................................................................i

Related Manuals ..................................................................................................................................i

Reader Scope ......................................................................................................................................i

Related Agreement .............................................................................................................................ii

Terminology Convention...............................................................................................................ii

Symbolic Convention ...................................................................................................................ii

Safety Instructions..................................................................................................................................... iii

1Product Description......................................................................................................................... 1-1

1.1 Overview........................................................................................................................... 1-2

1.2 Packing List ...................................................................................................................... 1-3

1.3 Appearance ...................................................................................................................... 1-4

1.3.1 Front Panel ................................................................................................................ 1-4

1.3.2 Rear Panel................................................................................................................. 1-5

1.3.3 Side Panel ................................................................................................................. 1-5

1.4 Button ............................................................................................................................... 1-7

1.5 Indicator ............................................................................................................................ 1-8

1.6 Interface............................................................................................................................ 1-9

1.6.1 Card Slot.................................................................................................................... 1-9

1.6.2 Power Supply Interface.............................................................................................. 1-9

1.6.3 Audio Interface(optional).......................................................................................... 1-10

1.6.4 RS485/RS232 Interface........................................................................................... 1-10

1.6.5 1000M Ethernet Interface ........................................................................................ 1-13

1.6.6 100M Ethernet Interface .......................................................................................... 1-13

1.6.7 HDMI Interface......................................................................................................... 1-14

1.6.8 USB 2.0 Interface .................................................................................................... 1-14

1.6.9 Micro USB Interface................................................................................................. 1-14

1.6.10 Antenna Interface .................................................................................................... 1-14

1.6.11 Motherboard Interface ............................................................................................. 1-14

2Install Components (optional).......................................................................................................... 2-1

2.1 Install Internal Components .............................................................................................. 2-2

2.1.1 Open Device Case..................................................................................................... 2-2

2.1.2 Install RTC battery ..................................................................................................... 2-3

2.1.3 Close Device Case .................................................................................................... 2-4

2.2 Install Other Components ................................................................................................. 2-6

2.2.1 Install Antenna ........................................................................................................... 2-6

2.2.2 Install Micro SD Card................................................................................................. 2-6

2.2.3 Install Nano SIM Card................................................................................................ 2-7

3Install Device................................................................................................................................... 3-1

3.1 DIN-Rail Installation .......................................................................................................... 3-2

4Boot The Device.............................................................................................................................. 4-1

4.1 Connect Cables ................................................................................................................ 4-2

4.2 Boot The System For The First Time ................................................................................ 4-3

4.2.1 Raspberry Pi OS (Desktop) ....................................................................................... 4-3

4.2.2 Raspberry Pi OS (Lite)............................................................................................... 4-3

5Configure System............................................................................................................................ 5-1

5.1 Find Device IP .................................................................................................................. 5-2

5.1.1 Query IP by Using ifconfig Command........................................................................ 5-2

5.1.2 Login Router to Query IP ........................................................................................... 5-2

5.1.3 Scan For Using NMAP Tool ....................................................................................... 5-3

5.2 Remote Login ................................................................................................................... 5-5

5.2.1 Connect To The Device Via SSH ............................................................................... 5-5

5.2.2 Connect To The Device Desktop Through VNC......................................................... 5-7

5.3 Configure Storage Devices ............................................................................................. 5-10

5.3.1 Mounting a Storage Device ..................................................................................... 5-10

5.3.2 Unmount The Storage Device.................................................................................. 5-12

5.3.3 Set The Storage Device To Mount Automatically ..................................................... 5-12

5.4 Configure Ethernet IP ..................................................................................................... 5-14

5.4.1 Configure IP by Using The NetworkManager Tool ................................................... 5-14

5.4.2 Configure IP by Using The dhcpcd Tool................................................................... 5-17

5.5 Configure WiFi (Optional) ............................................................................................... 5-19

5.5.1 Enable WiFi Function............................................................................................... 5-19

5.5.2 Use The NetworkManager Tool To Configure WiFi Connections ............................. 5-21

5.5.3 Configure WiFi Connection By Using dhcpcd Tool................................................... 5-23

5.6 Configure Bluetooth (optional) ........................................................................................ 5-25

5.6.1 Basic Configuration Command ................................................................................ 5-25

5.6.2 Configuration Example ............................................................................................ 5-25

5.7 Configure 4G (Optional).................................................................................................. 5-27

5.7.1 Use The NetworkManager Tool To Configure The Network ..................................... 5-27

5.7.2 Configure The Network By Using The dhcpcd Tool.................................................. 5-28

5.7.3 Configure 4G Module Reset .................................................................................... 5-29

5.8 Configure Buzzer ............................................................................................................ 5-31

5.9 Configure RTC ................................................................................................................ 5-32

5.10 Configure Serial Port....................................................................................................... 5-33

5.10.1 Install picocom tool .................................................................................................. 5-33

5.10.2 Configure RS232 ..................................................................................................... 5-33

5.10.3 Configure RS485 ..................................................................................................... 5-33

5.11 Configure Audio (Optional).............................................................................................. 5-35

5.11.1 Adjust The Volume................................................................................................... 5-35

5.11.2 Configure Record..................................................................................................... 5-37

5.12 Configure USER Indicator............................................................................................... 5-39

1 Product Overview

ED-IPC2100 Series User Manual 1-1

1 Product Description

This chapter introduces the product overview, packing list, appearance, button, indicators and

interfaces.

Overview

Packing List

Appearance

Button

Indicator

Interface

Table des matières

Autres manuels EDA PC industriel

EDA

EDA ED-IPC2600 Series Manuel utilisateur

Manuels PC industriel populaires d'autres marques

Chipsee

Chipsee PPC-A72-101 Manuel utilisateur

Advantech

Advantech UNO-2184G Manuel utilisateur

MSI

MSI MS-9A76 Manuel utilisateur

Stackrack

Stackrack THOR200 Manuel utilisateur

Moxa Technologies

Moxa Technologies DA-682C Series Manuel utilisateur

Nodka

Nodka eBOX-3000-ETC Manuel utilisateur

Siemens

Siemens SIMATIC IPC627E Manuel utilisateur

MSI

MSI MS-9A89 Manuel utilisateur

Artila

Artila Matrix-516 Manuel utilisateur

Siemens

Siemens SIMATIC Rack PC 840 V2 Manuel utilisateur

Advantech

Advantech IPPC-6152A Manuel utilisateur

Beckhoff

Beckhoff CX9020 Manuel utilisateur

Dell

Dell Embedded Box PC 5000 Manuel utilisateur

IBASE Technology

IBASE Technology ASB200-918 Series Manuel utilisateur

Lenovo

Lenovo ThinkCentre M90q Manuel du propriétaire

IXXAT

IXXAT Econ 100 Manuel utilisateur

Kontron

Kontron KBox A-151-TGL Manuel utilisateur

AXIOMTEK

AXIOMTEK ICO500-518 Series Manuel utilisateur