ECS H41IA1 Manuel utilisateur

Preface



The information in this document is subject to change without prior

notice in order to improve reliability, design and function and does

not represent a commitment on the part of the manufacturer.

In no event will the manufacturer be liable for direct, indirect,

special, incidental, or consequential damages arising out of the

use or inability to use the product or documentation, even if

advised of the possibility of such damages.

This document contains proprietary information protected by

reproduced by any mechanical, electronic, or other means in any

form without prior written permission of the manufacturer.

Limitation of Liability

While reasonable efforts have been made to ensure the accuracy

of this manual, the manufacturer and distributor assume no liability

resulting from errors or omissions in this manual, or from the use of

the information contained herein.

Notice:

Changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to

operate the equipment. Shielded interface cables and a non-

shielded AC power cord must be used in order to comply with

emission limits.

This equipment is to be used with power supply:

90W

There is no internal power supply.

Table of Content

BEFORE YOU START ...............................................................................2

LET YOUR COMPUTER ACCLIMATE ITSELF ..............................................6

HEAT,COLD,HUMIDITY,AND GLARE ....................................................6

SUITABLE PLACE TO WORK ...................................................................6

INTRODUCTION........................................................................................9

LEFT VIEWS ......................................................................................12

RIGHT VIEW ......................................................................................13

GETTING STARTED ...............................................................................16

CONNECTING THE AC ADAPTER .........................................................16

TO INSTALL THE BATTERY PACK:........................................................18

TO REMOVE THE BATTERY PACK: ......................................................19

USING THE NOTEBOOK COMPUTER.......................................................21

LCD CARE........................................................................................21

EXTERNAL CRT DISPLAY...................................................................21

TOUCHPAD PRECAUTIONS .................................................................23

DATA STORAGE AND RETRIEVAL ........................................................23

THE BATTERY POWER SYSTEM ..........................................................23

PREPARING THE BATTERY PACK FOR USE (BATTERY CALIBRATION) ....24

AUTOMATIC BATTERY PACK CHARGING FUNCTION..............................25

BATTERY STATUS..............................................................................25

BATTERY LOW WARNING ...................................................................25

HELP WINDOWS ................................................................................27

DESKTOP ..........................................................................................27

INTERNET CONNECTION ........................................................................32

RUNNING BIOS SETUP .........................................................................35

MAIN SETUP .....................................................................................37

INFO SETUP ......................................................................................37

ADVANCED........................................................................................38

INTEL SETUP .....................................................................................38

SECURITY SETUP ..............................................................................39

POWER SETUP ..................................................................................39

BOOT SETUP.....................................................................................40

EXIT SETUP ......................................................................................40

VGA UTILITIES.....................................................................................42

ADJUST RESOLUTION ........................................................................43

CALIBRATE COLOR ............................................................................44

ADJUST DISPLAY SETTING .................................................................44

CONNECT TO A PROJECTOR...............................................................45

ADJUST CLEAR TYPE TEXT ................................................................45

iii

TROUBLESHOOTING ..............................................................................47

NO SPEAKER OUTPUT ........................................................................48

SOUND CANNOT BE RECORDED ..........................................................48

THE HARD DISK DRIVE DOES NOT WORK OR IS NOT RECOGNIZABLE .......49

THE HARD DRIVE IS MAKING ABNORMAL WHINING NOISES .....................49

THE HARD DISK DRIVE HAS REACHED ITS CAPACITY .............................49

THE HARD DISK TAKES LONGER TO READ A FILE...................................51

THE FILES ARE CORRUPTED ...............................................................51

THE DISPLAY PANEL IS BLANK WHEN THE SYSTEM IS TURNED ON ..........51

THE SCREEN IS DIFFICULT TO READ ....................................................51

THE SCREEN FLICKERS ......................................................................52

THE BUILT-IN TOUCH PAD PERFORMS ERRATICALLY .............................52

THE BUILT-IN KEYBOARD ACCEPTS NO INPUT .......................................52

THE CHARACTERS ON THE SCREEN REPEAT WHILE ITYPE ....................52

AMESSAGE “CMOS CHECKSUM FAILURE”DISPLAYS DURING THE

BOOTING PROCESS OR THE TIME (CLOCK)RESETS WHEN BOOTING .......52

THE POST DOES NOT SHOW AN INCREASED MEMORY CAPACITY WHEN

YOU HAVE ALREADY INSTALLED ADDITIONAL MEMORY ..........................53

THE O/S ISSUES AN INSUFFICIENT MEMORY ERROR MESSAGE DURING

OPERATION .......................................................................................53

PC CARDS DO NOT FUNCTION ............................................................53

THE PC CARD CANNOT BE RECOGNIZED .............................................53

WINDOWS CRASHES OR FREEZES WHEN YOU REMOVE THE PC CARD ...54

THE COMPUTER BECOMES HOT ..........................................................54

THE PROGRAM APPEARS STOPPED OR RUNS VERY SLOWLY .................54

THE USB DEVICE DOES NOT WORK ....................................................55

UNABLE TO USE THE EXTERNAL USB DEVICE .....................................55

UNABLE TO RECOGNIZE THE EXTERNAL USB DEVICE .........................55

SPECIFICATION.....................................................................................57

Use this manual will help you get the most from your notebook

computer.

If you are an experienced user of computers and/or

Microsoft’s Windows operating systems, you might find it

useful to read the Quick Start Guide that comes along with

your accessories.

If you are a less experienced user, you should get through

the manual carefully before using your system.

Whether or not you are an experienced user, you should consult

on the Troubleshooting Chapter if you encounter any problems

with your notebook.

This section is designed to assist you in identifying potentially

unsafe conditions while working with this product. Required safety

features have been installed in the computer to protect you from

injury. However, you should use good judgment to identify potential

safety hazards:

1. Please read these safety instructions carefully.

2. Please keep this User's Manual for later reference.

3. Please disconnect this equipment from AC outlet before

cleaning. Don't use liquid or sprayed detergent for cleaning.

Use moisture sheet or cloth for cleaning.

4. For pluggable equipment, that the socket-outlet shall be

installed near the equipment and shall be easily accessible.

5. Please keep this equipment from humidity.

6. Lay this equipment on a reliable surface when installed. A

drop or fall could cause injury.

7. Make sure to use the right voltage for the power source when

connecting the equipment to the power outlet.

8. Place the power cord in such a way that people can not step

on it. Do not place anything on top of the power cord.

9. All cautions and warnings on the equipment should be noted.

10. If the equipment is not used for a long time, disconnect the

equipment from the main power outlet to avoid being damaged

by transient overvoltage.

11. Never pour any liquid into the opening, this could cause fire or

electrical shock.

12. Never open the equipment. For safety reason, the equipment

should only be opened by a qualified service personnel.

13. If on the following situations arises, get the equipment

checked by a service personnel:

a. The Power cord or plug is damaged.

b. Liquid has penetrated into the equipment.

c. The equipment has been exposed to moisture.

d. The equipment has not worked well or you cannot get it

work according to the user's manual.

e. The equipment has dropped and damaged.

f. If the equipment has obvious sign of breakage.

14. Do not leave this equipment in an environment unconditioned,

storage temperature above 60C (140f), it may damage the

equipment.

15. The unit can be operated at an ambient temperature of max.

5C to 35C.

16. The sound pressure level at the operators position according

to IEC 704-1: 1982 is equal or less than 70 dB(A).

17. Power Cord Requirements

The power cord set used with the AC adaptor must meet the

requirements of the country where you use the AC adaptor,

whether it is 100-240 Vac. The following information explains

the requirements for power cord set selection.

The cord set must be approved for the country in

which it is used.

The appliance coupler must have a configuration for

mating with a CEE7/EN60320/IEC 320/NEMA/ JIS C

8303 appliance inlet.

A. For U.S. and Canada:

The cord set must be UL Listed and CSA Certified.

The minimum specifications for the flexible cord are

No. 18 AWG, (2) Type SPT-2, and (3) 2-conductor.

B. For Japan:

All components of the cord set must bear a “PSE”

mark and in accordance with the Japanese Dentori

Law.

The minimum specifications for the flexible cord

are .75m ㎡conductors, (2) Type VCTR or VCTFK,

and (3) 2-conductor.

The cord set must have minimum rated current

capacity of 7 A.

The attachment plug must be a two-pole, grounded

type with a Japanese Industrial Standard C8303 (15

A, 125 VAC) configuration.

C. For Other Countries:

The cord set fittings must bear the certification mark

of the agency responsible for evaluation in a specific

country.

The flexible cord must be of a HAR (harmonized)

type H03VVH2-F.

The cord set must have a current capacity of a least

2.5 Amperes and voltage rating of 125 or 250 Vac.

(

)

P-

-9

B-

-A

P-

-9

B-

-A

-8

18. When using your telephone equipment, basic safety

precautions should always be followed to reduce the risk of

fire, electric shock and injury to persons. These precautions

include the following:

Do not use this product near water, for example, near a

bathtub, washbowl, kitchen sink or laundry tub, in a wet

basement or near a swimming pool.

Avoid using a telephone (other than a cordless type)

during an electrical storm. There may be a remote risk

of electric shock from lightning.

Do not use the telephone to report a gas leak in the

vicinity of the leak.

Use only the power cord and batteries indicated in this

manual. Do not dispose of batteries in a fire. They may

explode. Check with local codes for possible special

instructions.

19. Do not use the AC adapter near open water or other liquids.

Never spill liquid into the AC adapter.

20. Danger of explosion if battery is incorrectly replaced. Replace

only with the same or equivalent type recommended by the

manufacturer. Dispose of used batteries according to the

manufacturer's instructions. Never remove the battery pack

while the power is on as this may result in data loss when the

system loses power.

21. The input receptacle is used as the main disconnecting device.

22. Laser Warning: Laser Class I Product Caution - Invisible laser

radiation when open avoid exposure to beam.

The optical drive used with this computer is certified as a

Class1 laser device according to the U.S. Department of

Health and Human Services (DHHS) Radiation Performance

Standard and International Standards IEC 60825-1

(EN60825-1). The device is not considered harmful, but the

following precautions are recommended:

Do not open the unit.

Avoid direct exposure to the laser beam.

If the unit requires service, contact an authorized

service center.

Ensure proper use by reading and following the

instructions carefully.

Do not attempt to make any adjustment of the unit.

Your notebook can easily stand temperature extremes but it

doesn’t like rapid changes in temperature, like going from the cold

outdoors to a warm office. Rapid changes in temperature can

cause water droplets to condense inside your case, threatening to

damage the electronic parts inside.

After receiving your notebook when it’s hot or cold outside, try not

to power up the computer immediately, let the computer adjust to

the room temperature gradually at least for three to four hours.

Find a suitable place for your computer that’s not too hot, too cold,

too dark, or too bright. Glare can make it hard to read the screen.

Try to avoid the computer components from being destroyed

if it is overheated, so try to allow plenty of room for air to

circulate around the case.

Do not block the ventilation opening.

Do not place your computer in direct sunlight.

Your computer will run well wherever you’re comfortable but

extremes of temperature and humidity can be challenging to your

system’s parts.

There are some things you can tolerate that the computer can’t –

things like static electricity, dust, water, steam and oil. In case you

decide to pull over for roadside computing, try to choose a clean,

comfortable work area for your system.

Table des matières

Autres manuels ECS Ordinateur portable

ECS

ECS R40II Manuel utilisateur

ECS

ECS E10IL1 Manuel utilisateur

ECS

ECS Notebook computer Manuel utilisateur

ECS

ECS TL10IE2 Manuel utilisateur

ECS

ECS I41SI Manuel utilisateur

ECS

ECS EF20RA Manuel utilisateur

ECS

ECS Intel-powered Convertible Classmate PC Manuel utilisateur

ECS

ECS T30II Manuel utilisateur

ECS

ECS EC10II2 Manuel utilisateur

ECS

ECS Intel-powered Classmate PC Manuel utilisateur

ECS

ECS EG20BAX Manuel utilisateur

ECS

ECS T20IL1 Manuel utilisateur

ECS

ECS MB45II7 Manuel utilisateur

ECS

ECS Notebook computer Manuel utilisateur

ECS

ECS I36IA1 Manuel utilisateur

ECS

ECS MB40IAX Manuel utilisateur

ECS

ECS ES10IS2 Manuel utilisateur

ECS

ECS TL10IE2 Manuel utilisateur

ECS

ECS G799 Standard Manuel utilisateur

ECS

ECS O40 Series Manuel utilisateur

ECS

ECS SG20QT1C Manuel utilisateur

ECS

ECS ED20PA2 Manuel utilisateur

ECS

ECS I58II Manuel utilisateur

ECS

ECS G733G Manuel utilisateur

Manuels Ordinateur portable populaires d'autres marques

HP ze2401xt - Pavilion Notebook PC Manuel utilisateur

Velocity

Velocity NoteMagix M10 Manuel utilisateur

Dell

Dell Alienware 17 R2 Manuel utilisateur

Toshiba

Toshiba A105-S2236 Manuel utilisateur

HP ENVY 17 Manuel

Winbook

Winbook LM Manuel utilisateur

Dell

Dell Inspiron 1464 Manuel utilisateur

Dell

Dell Inspiron 15R 5537 Manuel utilisateur

HP PROBOOK 4520S Manuel

Dell

Dell Latitude ATG D620 Manuel utilisateur

Sony

Sony VAIO PCG-FX270 Manuel utilisateur

Dell

Dell Latitude 7310 Manuel utilisateur

Dell

Dell Precision GU806 Manuel utilisateur

Sony

Sony VAIO PCG-R505JLK Manuel utilisateur

Lenovo

Lenovo THINKPAD X32 Manuel utilisateur

HP Compaq tc4200 Guide de démarrage rapide

Toshiba

Toshiba mini NB300 Manuel utilisateur

Lenovo

Lenovo ThinkPad X201 Tablet Manuel