EcoxGear SOUNDEXTREME SEI-SERXBT Manuel utilisateur
User Guide
Bluetooth Receiver
Remote Control
Model: SEI-SERXBT
2
· Please read this User Guide before installation and use.
· CAUTION: The power input voltage range for your Bluetooth®
Receiver Remote Control (referred to as Receiver) is 9V to 16V.
It is designed to work with a +12V DC battery power supply. If
your vehicle battery power output is not 12V (e.g., 24V, 36V, or
48V), you will need a voltage converter with 12V output (e.g.,
a 48V-to-12V converter). Connecting the Receiver directly to
higher voltages will cause damage to your device and VOID
THE PRODUCT WARRANTY.
· The Receiver has a Remote Turn-On Input feature; this is an
optional connection to your vehicle ignition switch so you can turn
the Receiver on or o via the ignition switch. When this input has a
signal between 12V to 56V, the Receiver will turn on. When there is
no input voltage, the Receiver will turn o.
· The Receiver’s audio outputs are pre-amplified signals that need
to be connected to a power amplifier, radio, or powered speakers
(sold separately).
· The Receiver fits in a standard Carling rocker switch opening,
which is commonly used in the dashboard of many o-road
vehicles, boats, and golf cars. The Receiver panel is waterproof;
however, the housing behind the panel is only splash proof.
· CAUTION: In order to make sure there is no potential damage to
your audio system, unplug or power o your audio equipment until
after all connections are completed.
Important
3
Introduction
Features
The Receiver is an all-in-one device that supports Bluetooth,
EcoCast, and Aux-In.
Bluetooth
The Receiver utilizes Bluetooth 5.1, which provides up to 100 foot
Bluetooth range and dual simultaneous smartphone connections.
EcoCast
The Receiver also has EcoCast built-in, which allows the Receiver
to broadcast (transmit) or receive audio streams to/from other
EcoCast-enabled products. ECOXGEAR and SoundExtreme
have a complete line of EcoCast-enabled speakers, soundbars,
subwoofers, and radios.
If you currently do not have any other EcoCast-enabled product to
work with the Receiver, you can skip all EcoCast-related content.
All EcoCast-enabled products have two optional streaming modes:
· EcoCast Transmitting Mode. When set in this mode, the EcoCast-
enabled product transmits either Aux-In or Bluetooth Audio to
multiple wirelessly connected EcoCast-enabled products.
· EcoCast Receiving Mode. When set in this mode, this Receiver
product receives audio from another EcoCast transmitting audio
product, like a SoundExtreme soundbar, radio, or tower speaker.
Receiver Audio Modes
The Receiver has the following 4 Audio Modes: Speaker (Bluetooth)
Mode, EcoCast Transmitting Mode, EcoCast Receiving Mode, and
Aux-In Mode. Refer to the following table for details.
4
Introduction
RECEIVER AUDIO MODE CONNECTED TO PHONE ECOCAST
Speaker (Bluetooth) Yes Disabled
EcoCast Transmitting Yes Transmitting
EcoCast Receiving No Receiving
Aux-In No Disabled or
Enabled
(Transmitting)
5
AUDIO INPUT TO RECEIVER AUDIO OUTPUT TO AMPLIFIER
The Receiver is connected to a
phone’s Bluetooth signal.
Audio Output via the RCA cables that
are connected to an amplifier, radio,
soundbar, etc.
The Receiver is connected to a
phone’s Bluetooth signal.
Audio Output via the RCA cables
that are connected to an amplifier,
radio, soundbar, etc., as well as
sending audio wirelessly to other
EcoCast-enabled products.
The Receiver receives audio
streams from a wirelessly
connected EcoCast-enabled
product in Transmitting Mode.
Audio Output via the RCA cables that
are connected to an amplifier, radio,
soundbar, etc.
The Receiver receives audio from
an Aux-In audio source.
Audio Output via the RCA cables that
are connected to an amplifier, radio,
soundbar, etc. If enabled (Transmitting),
it also broadcasts the Aux-In Audio to
multiple wirelessly connected EcoCast-
enabled products.
Introduction
6
Receiver Layout
Receiver Overview
Audio Outputs: Right
(Red) / Left (White)
Power Button Audio Mode Button
EcoCast Button
Play / Pause and
Tracking Buttons
Volume Buttons
Amp-On (Yellow)
Aux-In Input
Power Inputs: +12V Wire
(Red) / GND Wire (Black)
Remote Turn-On
Wire (Dark Blue)
Inputs and Outputs
7
Receiver Overview
Connectors
Inputs:
· Power +12V, GND
· Remote Turn-On (input signal: 12 - 56V) – When this input is
connected to your vehicle’s ignition switch (or rocker switch or
any switch accessory panel), it will turn on or o without having to
press the Power Button .
· Aux In – 3.5mm audio jack. This input can be used to connect an
additional soundbar, or other audio source, like your phone, CD
player, MP3 player, etc.
Outputs:
· Amp-On – With this output, you can turn on the audio power
amplifier the Receiver is connected to.
· RCA Aux-Out – This is the audio output. The Red and White RCA
Jacks are the Right and Left audio channels, respectively. Connect
the device to an audio power amplifier with RCA to RCA cables
(not included) or RCA to 3.5mm audio cables (not included).
Buttons and LED Status Indicators
On / O
The Receiver can be turned on and off by the following methods:
· If you connect the Remote Turn-On Input to your vehicle’s ignition
switch or a switch accessory panel, you can turn it on or o by
turning the ignition switch on or o.
· If you leave the Remote Turn-On Input unconnected, press and
hold the Power Button to turn the Receiver on or o.
Backlit Buttons
When the Receiver is on, all the backlit buttons on the Receiver can
be turned on or turned off by short-pressing the Power Button .
8
Receiver Overview
Mute
· When the Receiver is playing music, double-click the Power
Button to mute or unmute your audio.
· When the Receiver is muted, short-press any button to unmute.
Enable Bluetooth and EcoCast Pairing
· Short-press EcoCast Button to enable EcoCast pairing.
· Press and hold the EcoCast Button to enable Bluetooth
pairing. The Receiver will announce, “Ready to connect.” If the
Receiver has already connected to a phone, press and hold the
EcoCast Button to disconnect the connected phone and
enable pairing to a new phone.
· Press and at the same time to clear Bluetooth pairing records.
LED Status Indicator and Voice Prompts
There is a LED Status Indicator behind the Power Button and the
Audio Mode Button . The LEDs correspond to different functions:
i. Speaker (Bluetooth) Audio Mode
· When the Audio Mode is switched to Bluetooth Mode, the
Receiver will announce, “Speaker Mode. Ready to connect.” The
LED Status Indicator behind the Audio Mode Button will shine
solid Blue, indicating the Audio Source is set to Bluetooth. The
LED Status Indicator behind the Power Button will flash Blue,
indicating that Bluetooth pairing has been enabled.
· Once the Receiver has successfully connected to a phone, it will
announce, “Your Phone is Connected.” The LED Status Indicator
behind the Power Button will shine solid Blue.
ii. EcoCast Audio Mode
· When the Audio Mode is switched to EcoCast Transmitting Mode,
the Receiver will announce, “EcoCast Transmitting.” The LED
9
Receiver Overview
Status Indicator behind the Audio Mode Button will flash Red,
indicating EcoCast pairing has been enabled.
· When the Audio Source is switched to EcoCast Receiving Mode,
the Receiver will announce, “EcoCast Receiving”. The Status LED
behind the Audio Mode Button will flash Green, indicating
EcoCast pairing has been enabled. Once the Receiver is paired
and connected to a speaker in EcoCast Transmitting mode, it will
announce, “Connection successful.” The Status LED will shine
solid Green.
iii. Aux-In Audio Mode
· When the Audio Source is switched to Aux-In Audio Mode, the
Receiver will announce, “Aux-In.” The Status LED behind the Audio
Mode Button will shine solid Yellow.
The following table lists all the Button functions with related Status
LED indications and voice prompts.
10
Receiver Overview
BUTTON ACTION FUNCTION
Press and Hold
(for 3 seconds)
To turn on / o the Receiver.
Short-Press To turn on / o the Backlit Buttons.
Double-Click To mute / unmute audio.
Short-Press To cycle through each of the four Audio
Source Modes.
Table des matières
Autres manuels EcoxGear Télécommande
Manuels Télécommande populaires d'autres marques
Panasonic
Panasonic EUR7622KB0 Manuel utilisateur
Bang & Olufsen
Bang & Olufsen Beo4 Manuel utilisateur
Sunwave Tech.
Sunwave Tech. RemoteComm SRC-7000 Manuel utilisateur
Multiplex
Multiplex PROFI TX 9 Manuel utilisateur
One Remote
One Remote RMB4 Manuel utilisateur
FUTABA
FUTABA 9ZAP - PART2 Manuel utilisateur
