Ecostrad Opus Manuel utilisateur

Ecostrad Opus Infrared Heating

Panel

Ratings: 220 – 240 V, 50 Hz, Class I, IP54

Symbols

Warning

This symbol indicates a hazard with an average risk level which, if not

avoided, could result in serious injury or death.

Warning of electrical voltage

This symbol indicates danger to the life and health of persons due to

electrical voltage.

Do not cover

This symbol located on the device indicates that it is prohibited to place

objects (such as towels, clothes etc.) above or directly in front of the device.

To avoid overheating and fire hazards, the device must not be covered.

Hot surface

This symbol located on the device indicates that its surfaces are hot during

and immediately after operation. Hot surfaces should not be touched:

danger of burns.

Do not spray

This symbol located on the device indicates that it is prohibited to spray the

device.

Observe instructions in manual

This symbol located on the device indicates that instructions in the operating

manual must be observed when installing and using the device.

Contents

1 | About the Device

2 | Warnings & Precautions

3 | Technical Information

4 | Supplied Parts

5 | Device Structure

6 | Installation

7 | Troubleshooting

8 | Maintenance & Servicing

9 | Storage

10 | ErP Ecodesign Information

11 | Disposal

1 | About the Device

The device is designed to provide an efficient, comfortable, and healthy heating

system for domestic or commercial properties.

Infrared heating panels can reduce air circulation and help to maintain a clean,

silent, dust free environment.

Infrared panels are designed for indoor environments with normal heating

requirements. They are ideal for homes, schools, hospitals and offices. They should

not be used outdoors or in large internal spaces such as workshops or warehouses.

The Ecostrad infrared panel range is available in a wide range of sizes and styles.

2 | Warnings & Precautions

Read this manual carefully before using or installing the device. Always store the

manual in the immediate vicinity of the device or its site of use.

Read all safety warnings and all instructions.

Failure to follow the warnings and instructions may result in electric shock, fire,

serious injury, or all of the above. Save all warnings and instructions for future

reference.

Warning

Do not ceiling mount panels designed for wall mounting only.

Use of panels in unspecified locations can cause panels to overheat and

poses a fire risk.

Warning

This appliance can be used by children aged from 8 years and above and

persons with reduced physical, sensory or mental capabilities or lack of

experience and knowledge if they have been given supervision or instruction

concerning the use of the appliance in a safe way and understand the

hazards involved. Children shall not play with the appliance. Cleaning and

user maintenance shall not be made by children without supervision.

Warning

Children of less than 3 years should be kept away unless continuously

supervised. Children aged from 3 years and less than 8 years shall only

switch on/off the appliance provided that it has been placed or installed in

its intended normal operating position and they have been given supervision

or instruction concerning use of the appliance in a safe way and understand

the hazards involved. Children aged from 3 years and less than 8 years shall

not plug in, regulate, or clean the appliance, or perform maintenance.

Warning

Do not use the device in enclosed spaces if persons are present who cannot

leave the room independently and are not under constant supervision.

Warning

Some parts of this product can become very hot and cause burns. Do not

install close to curtains or other combustible materials. Particular attention

should be given where children and vulnerable adults are present. To avoid

the possibility of injury, the following people should be particularly careful

when using the heater: infants and children, the elderly, the disabled, people

with medical conditions, people with sensitive skin, and people under the

influence of alcohol, drugs, or sleeping pills.

•Remove both protective films (on the front and on the back) before using.

•Be sure the usage voltage is between 220-240V, 50Hz, and the power supply is

strictly in accordance with IEC regulations. The device must be earthed.

•Any socket used with the device must be at least 5A.

•Do not use the device in rooms where contact with flammable or potentially

explosive materials like dust, gas or vapour cannot be avoided.

•Do not use in rooms or environments that have a corrosive atmosphere.

•Set the device up in an upright and stable position.

•Do not operate the device when wet. If the device gets wet during cleaning,

allow it to dry out before using.

•Do not use the device with wet or damp hands.

•Do not expose the device to water jets.

•Never insert fingers or objects into the device.

•Do not cover the device during operation.

•Do not transport the device during operation.

•Do not sit on the device.

•This appliance is not a toy. Keep away from children and animals. Do not

leave the device unattended during operation.

•Check accessories and connection parts for possible damage prior to every

use of the device. Do not use defective devices or device parts.

•Ensure all electric cables outside of the device are protected from damage –

e.g. from animals or furniture. Never use the device if electric cables or power

connections are damaged.

•The electrical connection must correspond to the specifications given in the

technical information chapter (section 3).

•Insert the mains plug into a properly secured mains socket.

•Do not overload the socket used to power the device.

•Observe the device's power output, cable length and intended use when

considering use of an extension cable. If an extension cable is used it should be

fully unrolled; do not coil the cable. Avoid electrical overload. Do not create a

hazard with trailing wires.

•Before carrying out maintenance, care or repair work on the device, ensure

the device is unplugged. Do not use the cable to tug the plug from the socket.

Hold the plug by its housing and pull.

•Switch the device off and disconnect the power cable from the mains socket

when the device is not in use.

•Do not under any circumstances use the device if you detect damage to the

mains plug or power cable. If the supply cord is damaged, it must be replaced

by the manufacturer, its service agent or similarly qualified persons to avoid a

hazard. Defective power cables pose a serious health risk.

•When installing the device observe the minimum distances from walls and

other objects as well as the storage and operating conditions specified in the

installation instructions (section 6).

•Never drill into the heating device.

•Do not use the device in close proximity to curtains or other flammable

materials.

•Do not touch the surface of the device during operation. The surface reaches

high temperatures when in operation. Risk of burns.

•Allow the device to cool down before touching or transporting the device, or

attempting maintenance work.

•Do not use this device near bathtubs, shower trays, swimming pools or other

water containers. Risk of electric shock.

•The device must be placed where the switches and controllers cannot be

touched by a person in a bathtub or shower.

3 | Technical Information

Heating element Carbon crystal

Heating method Far infrared heating

Voltage

220-240V/50Hz

Surface temperature Wall panels: approx. 85-95 °C

Ceiling panels: approx. 90-105 °C

Body material Aluminium

IP rating IP54 (excluding plug)

Overheat protection Yes

Power cable length 1.9m

Model Specifications

Model Size (mm) Power

(W)

Voltage /

Frequency

Rated

Current (A)

Mounting

Type

F0606 595 x 595 350

230V / 50Hz

1.5 Wall only

F0706

705 x 605

450

2.0

Wall only

F1006 1005 x 605 580 2.5 Wall only

F1207 1205 x 755 900 3.9 Wall only

F1209 1205 x 905 1100 4.8 Wall only

F0606-C 595 x 595 270 1.2 Ceiling or wall

F0706-C

705 x 605

320

1.4

Ceiling or wall

F1006-C 1005 x 605 450 2.0 Ceiling or wall

F1207-C 1205 x 755 700 3.0 Ceiling or wall

F1209-C

1205 x 905

800

3.5

Ceiling or wall

Warning

Do not ceiling mount panels designed for wall mounting only.

Use of panels in unspecified locations can cause panels to overheat and poses a

fire risk.

4 | Supplied Parts

•1 x Heating Panel (A)

•1 x Control Guide

•1 x Installation Manual

•1 x Wall Mounting Kit:

o4 x Screws (B)

o4 x Wall Plugs (C)

o1 x Drilling Template (D)

The kit provided should be used for wall mounting only.

Specialised ceiling mounting kits are available through the supplier. Kits are

available for both direct and suspended installation. Purchase a suitable kit before

attempting ceiling-mounted installation

5 | Device Structure

Component parts

1. Frameless aluminium shell

2. Heating element

3. Insulation layer

4. Rear aluminium sheet

5. Power cable

6. Junction box

7. Mounting bars

6 | Installation

Warning – Remove protective films from back and front of panel

before installing.

Wall Mounting Instructions

These instructions apply to wall mounting only. Turn to page 10 for ceiling

mounting instructions.

If the device is being fitted in a bathroom, the unit must not be plugged in. The

plug should be removed and the unit hardwired into a fused spur. This is a job for

a qualified electrician.

1. Choose the mounting position, respecting the

minimum distances from surrounding walls, ceilings

or fixed objects listed in the table opposite.

Minimum distances must be observed. Mounting

closer than recommended creates a fire risk.

2. Stick the drilling template on the wall. Drill the holes

with an 8mm rotary bit.

3. Push the wall plugs (C) into the holes. Insert the screws (B) into the wall plugs.

The screws should protrude approx. 5mm from the plugs.

4. Hang the heating panel on the screws.

5. Slide the panel across so that the screws lock into their correct position in the

bracket, as pictured below:

Minimum distances

Front

300mm

Left 100mm

Right 100mm

Top

500mm

6. Plug the device into a power socket to begin using. Unplug when not in use.

Note – if the device is fitted in a bathroom, the plug must be removed and

the unit hardwired into a fused spur; this is a job for a qualified electrician.

Ceiling Mounting – Direct Method

This method should only be used with panels designed for ceiling mounting, when

the kit below has been purchased:

Ecostrad

Ceiling

Mounting Kit:

1. Drill four holes on the ceiling, positioned as per the diagram below,

according to the measurements given per size in the table below. You will

need a 6mm drill bit.

Panel Size (mm) Distance A (mm) Distance B (mm)

595 x 595 310 474

705 x 605 360 474

1005 x 605 480 474

1205 x 755

660

624

1205 x 905 660 704

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Ecostrad Chauffage

Ecostrad

Ecostrad Ecowarme Guide de sécurité

Ecostrad

Ecostrad ECO6+ Manuel utilisateur

Ecostrad

Ecostrad iQ Series Manuel utilisateur

Ecostrad

Ecostrad Apex Manuel utilisateur

Ecostrad

Ecostrad Cirrus Manuel utilisateur

Ecostrad

Ecostrad Thermostrip Manuel utilisateur

Ecostrad

Ecostrad SUNGLO Manuel utilisateur

Ecostrad

Ecostrad iQ Ceramic Manuel utilisateur

Ecostrad

Ecostrad THERMAGLO Manuel utilisateur

Ecostrad

Ecostrad SUNGLO Manuel utilisateur

Ecostrad

Ecostrad ADESSO Series Manuel utilisateur

Ecostrad

Ecostrad Ecowarme Manuel utilisateur

Ecostrad

Ecostrad Tuscany EsS-HC-25 Manuel

Ecostrad

Ecostrad ALLORA Vertical Manuel utilisateur

Ecostrad

Ecostrad ALLORA Series Manuel utilisateur

Ecostrad

Ecostrad Digital Manuel utilisateur

Ecostrad

Ecostrad ADESSO Manuel utilisateur

Ecostrad

Ecostrad ASCOLI Manuel utilisateur

Ecostrad

Ecostrad ALLERTON Manuel utilisateur

Ecostrad

Ecostrad ALLORA Manuel utilisateur

Ecostrad

Ecostrad THERMAGLO Guide de référence rapide

Manuels Chauffage populaires d'autres marques

oventrop

oventrop Regucor Series Manuel utilisateur

Blaze King

Blaze King CLARITY CL2118.IPI.1 Manuel utilisateur

ELMEKO

ELMEKO ML 150 Manuel utilisateur

BN Thermic

BN Thermic 830T Manuel utilisateur

KING

KING K Series Mode d’emploi

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Guide de démarrage rapide

Well Straler

Well Straler RC-16B Manuel utilisateur

EUROM

EUROM 333299 Manuel utilisateur

Heylo

Heylo K 170 Manuel utilisateur

Eterna

Eterna TR70W Manuel utilisateur

Clarke

Clarke GRH15 Mode d’emploi

IRSAP

IRSAP The Radiator Company Ovali Manuel utilisateur

Empire Heating Systems

Empire Heating Systems WCC65 Manuel utilisateur

Wetekom

Wetekom 92 86 43 Manuel utilisateur

Desa

Desa SPC170-F Manuel utilisateur

Watlow

Watlow Watrod Electric Tubular Heaters Manuel utilisateur

Haverland

Haverland ECO-DRY GPS Series Manuel de la liste des pièces

Stelpro

Stelpro ASILVC2060 Series Manuel utilisateur