DIESEL-OIL PROCESS BURNERS INSTALLATION, OPERATING AND MAINTENANCE MANUAL
26.11.2014 Rev. 0002 5
2.1. Out of Warranty Conditions
•Any damage arisingout of orin relation to customers’ non-compliance to their responsibilities
with regards to installation, commissioning, operation and maintenance,
•Any damage arising out of or in relation to commissioning, repairs and maintenance carried out by
unauthorized services,
•Any damage thatmay occur during transportation or storage of the product,
•Not preserving the product in its originalpackaging until the installation stage,
•Incorrect and poor electricalconnections, Failures due to incorrect voltageapplications,frequent
repetition of voltage fluctuations,
•Any damage that may occur as aresultof incorrectfuelusage or, foreign substances inthefuel
used or using of the product without anyfuel,
•Any damage that may occur due to foreign particles entered into theproduct during installation
and operation,
•Failures due to incorrect device selection,
•Any damage to unit due to natural disasters,
•Devices without anywarranty certificates,
•Warranty Certificates without the stampand signature of the authorizeddealer or service,
•Devices with any falsification on the warranty certificate orwithout an originalserial number.
•The risks during transportation of device underthe responsibilityof customer belong to the
customer.
•Presence of misuse faults areindicated inthe reports issued by authorized servicestations or our
authorizedagent, dealer, representativeor our factory incase of unavailability of authorized
service stations.
•Customersmay apply consumer protection arbitrator committee withregards to this report and
request for an expert report.
3. BURNER’S GENERAL FEATURES
ECOSTAR diesel-oil burnersare designed to operatewithoil at2.5 –6Cst (mm²/s)
viscosity, at rated capacity andpressure ranges and -15% to +10% nominal voltage.
3.1. Purpose of Use and Work Limits of Burners
•This product works at any load value equivalentto its max. capacityor covered by its capacity
range;
--15 0C…+60 0C ambient temperature range,
-220 V/380V/50 Hz feed voltage (-%15…+%10) values,
-Max. 95% relative humidity,
-in well-ventilated open and closed spacescompatible with protection class IP 40.
This devicemust never be operated withopen flame!
