7
ENG
INSTRUCTION MANUAL ECOSOFT MO MIDI SYSTEMS
This manual is the intellectual property of Ecoso. Copying and reprinng is prohibited. © 2020
-
membrane.
It is strongly recommended to use short runs of pipe or hose the size of which
-
-
-
to the vessel. Remove the lid at the feed end of pressure vessel. First, remove spiral retaining
ring by pulling bent tab towards the center of circle. If the pressure vessel lid is retained by half
membrane adapter.
last. Central tube of the membrane has to mate with membrane adapter installed at the concen-
trate end of pressure vessel. If necessary, remove the lid at the concentrate end before installing
end. Couple the second membrane with the connector, then push it forward all the way in the
place. Put spiral retaining ring (or half rims) in the groove, fasten half rims with screws. Re-assem-
ble the RO system in reverse order.
outlet of the RO system and run it to drain pipe. Ensure air gap at the end of drain line to prevent
