1.8. W at
ch the r
oad .Though road conditions and tracks design have recently become
better you should be always aware. You can meet pits, drains, low edges, etc on your
way. Cross the railway cautiously at the angle of 90 degrees. In case you don’t feel
ct ycle and drive it.
1.9. Wat
ch the par
ked c
ars when passing b
y.You can easily get into trouble in case
a car drives suddenly away or a car door is suddenly opened on your way. For your
safety it’s advisable to use the alarm bell.
1.10. B
e c
areful when driving a
t nigh
t time.Your bicycle is equipped with required re-
t e it’s necessary and make sure they are clean. Do remem-
ber no matter you have r tors you are still in danger of being injured unless light
is focused on them. We also advise you to set light equipment on your bicycle and
wear bright clothes to be seen on the road. The key point is to see and to be seen.
Please use numerous and various gadgets for that.
1.11. M
ind w
et w
eather.Any brakes no matter the design don’t function same way in
wet and dry weather. That is why one should stick to safety rules. When it’s wet out-
side your well adjusted and oiled brakes still require an increased lever pressure and
a longer braking distance. It will take you more time to stop. Besides, wet weather
leads to bad view (for you and car drivers) and worsens road adherence. Slow down
when turning on wet road. Greasy leaves and hatches can be dangerous as well.
1.12. If y
ou use additional equipmen
t and mak
e t
echnic
al changes t
o y
our bik
e(child
seat, additional seats, lighting equipment installed) take the national tr egula-
tions and applicable standards into account.
1.13. N ev
er lea
ve y
our bik
e unatt
ended t
o pr
even
t thef
t.
2. ASSEMBL Y
_________________________________________________________
2.1 Unf
old the f
olding fr
ame
2.1.1 All the folding bike should be folded
before go out
2.1.2 T t
ground,people stand out of the crank,
prepare to unfold the bike.
2.1.3 Before unfold the frame,make sure all the lock device are open.
2.1.4 Unfold the front and rear parts of the bike,make the folding device
closed,then the front and rear parts of the frame are on the same horizon.
2.1.5 6-8KGF. Press the folding device on the frame,make the device are closed,
it need 6-8KGF to close the folding device on the frame.
