ECO-WORTHY ECO-120W Manuel utilisateur
Contents
1. Production Instruction
2. Technical Parameter
3. Component
4. Wiring
5. Tips for Panel Setting
6. Tips for Controller Use
7. The Connection Way for 2 Kits
8. Important Safety Information
9. Warning
Production introduction
Technical Parameter
This product is a portable solar charging folding bag, ECO-WORTHY
solar panel is designed to be foldable; High-efficiency mono cell for
better charging effect; equipped with intelligent controller for various
occasions and protection of electronic equipment.
Product Name
Composition
Solar Cell Type
Open Circuit Voltage
Controller Port
Folded Dimensions
Expanded Dimensions
Net Weight
Internal Cable
External Cable
120W Foldable Solar Charger
4 x 30 W, 18V
Mono-Crystalline Silicon
16-18 V
18V DC solar port*1
5V 2A USB port*2
12V DC load port*1
21.5* 14.6 * 2.5 inches
62.2 * 21.5 * 0.2 inches
3.82kg(8.42Ib)
9.84feet
9.84feet
Controller:Controls the charging and discharging of the battery, and
has anti-backlash, anti-overcharge, anti-over-discharge, anti-reverse
connection and so on.
12V DC Output: The output of the controller can be connected to 12V
load, the maximum current is 20A, and it will be automatically
disconnected when the battery is exhausted.
Solar Output: Solar 18V output that powers some devices that already
have a built-in controller. Load Switch: Controls the on and off of the
output.
Display: Displays information such as the charge status and discharge
status and battery voltage. 5V USB: Powers electronic devices such
as mobile phones.
Component
ECO-WORTHY
Battery Port: The controller needs to be connected to the battery to work.
Only when the battery is connected, the output and USB will supply power.
The applicable battery is a 12V/24V lead acid battery.Charging Port for
Computer: Plug the mc4 connector into the Solar Output to power the
computer.
DC Adapter: Use a DC converter for different DC ports.
Wiring A: Support your solar generator/laptop
Step 1:
Connect the 9FT MC4 connector cable to the solar output cable via
the MC4 connector.
Step 2:
Choose the right DC adapter from 8 in 1 DC adapters for your solar
generator and connect the right DC adapter to the DC port of 9FT MC4
connecttor cable.
Step 3:
Connect the 9FT MC4 connector cable with the right DC adapter to
your generator/laptop.
ECO-WORTHY
Wiring
ECO-WORTHY
ECO-WORTHY
Wiring B: Support your battery charging for phone/load
Step 1: Because the solar panels are connected, you only need to connect
your battery with the pair of the battery clips.
Step 2: Connect your phone to the 5V USB port or connect your load to
the DC load port on the controller as your need.
Step 3: Open the controller that comes with the system.
please don’t support your generator and support your battery charing
at the same time!
Caution
ECO-WORTHY
Caution:
Tips 1:The panel bag must be totally opened. If there is a small piece
of the panel in the shadow, the output of the panel will be deeply affected.
Please set(pointing south) the panel at an angle of 45 degreesto use to
the greatest advantage.
The foldable solar charger is consisted of 4 pieces solar cells.
1 of 4 pieces solar cells in the shadow is equal to 4 pieces cells in the shadow.
One leaf on the 1 of 4 peices solar cells is equal to that there are leaves
on all 4 peices solar cells.
ECO-WORTHY
Tips for panel setting
Tips 2:It is forbidden to place the panel in rain.
Tips 1：The controller can prevent the battery
from being damaged, anti-inverse charging,
overcharging and overdischarging. What’s more,
the controller can display a real-time voltage
and discharge status of the battery.
Tips 2：If you want use as wiring B, please
make sure you have connected the controller
to the battery. If not, your load/appliances won’t
be powered.
Tips 3：Prohibit any short circuit connection behavior It is forbidden to
reversedly connect the battery/load, otherwise it may cause damage to
your battery and appliance.
ECO-WORTHY
Tips for controller use
Table des matières
Autres manuels ECO-WORTHY Panneau solaire
