ECO-WORTHY 400 Manuel utilisateur
1
ECOWORTHY 400 Solar Tracker Owner’s Manual
Pages 2-17 „„„„„„„„„Installation instructions
2
Step 1: Parts list
1. Galvanized post
2-5 &11-12 Solar panel mounting arms
6-8 Main tracker mount
9. North/South linear actuator
10. East/west linear actuator
13. Electronic control box and light-sensor box
14. Remote controller for test
15. Fasteners
16. 4x100W solar panel (optional)
3
Step 2: Galvanized post installation
Wind.soil bearing strength and frost heave potential will vary. if the pole is not
below the frost line it can heave in winter. Consult a local licensed civil
engineer for exact recommendations based on your local conditions. Only
licensed civil engineer can provide exact recommendations for post mounting
due to local conditions.
4
Step 3：Attaching the main tracker mount“8”to post
5
Step 4: Bolting the main tracker mount “6” to “ 8”
6
Step 5: Bolting North/South Linear actuator“9”
7
Step 6 Attaching the main tracker mount “7”to “6”
8
Step 7: Attaching solar mounting arms “2”to “4”,“3”to“5”
（“ 4”&“5”are the same）
Use same methods to installing solar panel mounting arms “2”& “4”
Then installing the arms to the main tracker mount “6”
9
10
Step 8: Bolting East/west linear actuator“10”
Table des matières
