Eclipse P424L Manuel utilisateur
P424L P424M
Instruction Manual
Table of Contents
EMI Warning.......................................................................................................... 3
Safety Guidelines .................................................................................................. 5
Preparation for Use ............................................................................................... 7
Features ................................................................................................................ 8
Free Wheel Mode................................................................................................ 11
Disassembly ........................................................................................................ 12
Batteries and Battery Charging ........................................................................... 13
Inspection & Maintenance................................................................................... 15
Trouble Shooting ................................................................................................. 18
Warranty.............................................................................................................. 20
Specifications P424M.......................................................................................... 21
Specifications P424L........................................................................................... 22
Options ................................................................................................................ 23
1
Introduction
Congratulations on the purchase of your Shoprider scooter. Please carefully read
this owner’s manual before attempting to use your scooter. After reading the
manual if you still have any questions or concerns please feel free to contact
your local authorized dealer.
Model: P424M / P424L Serial #: _______________________
Date Purchased: _______________________
Dealer Information: _______________________
2
EMI Warning
Electromagnetic Interface (EMI) From Radio Wave Sources
Powered motorized Powerchairs may be susceptible to electromagnetic
interference (EMI), which is interfering electromagnetic energy (EM) emitted from
sources such as radio stations, TV stations, amateur radio (HAM) transmitters,
two-way radios, and cellular phones. The interference (from radio wave sources)
can cause a powered Powerchair to release its brakes, move by itself or move in
unintended directions. It also can permanently damage the powered
Powerchair's control system.
The sources of radiated EMI can be classified broadly into three types:
1. Hand-held portable transceivers (transmitters-receivers) with an antenna
mounted directly on the transmitting unit. Examples include: citizens band
(CB) radios, "walkie-talkies", fire and police transceivers, cellular telephones
and other personal communication devices. **NOTE: some cellular
telephones and similar devices transmit signals while they are ON, even when
not being used.
2. Medium-Range mobile transceivers, such as those used in police cars, fire
trucks, ambulances and taxis. These usually have the antenna mounted on
the outside of the vehicle.
3. Long-range transmitters and transceivers, such as commercial broadcast
transmitters (radio and TV antenna towers) and amateur (HAM) radios.
**NOTE: So far as we know, other types of hand-held devices, such as
cordless phones, laptop computers, AM/FM radios, TV sets, CD players,
cassette players and small appliances, such as electric shavers and hair
dryers, are not likely to cause problems to your powered Powerchair.
Powered Powerchair Electromagnetic Interference (EMI)
Because EM energy rapidly becomes more intense as one moves closer to the
transmitting antenna (source), the EM fields from hand-held radio sources
(transceivers) are of special concern. It is possible, unintentionally, to bring high
levels of EM energy very close to the powered Powerchair's control system while
using these devices. This can affect powered Powerchair movement and braking.
3
Therefore, the warnings listed below are recommended to prevent possible
interference with the control system of the powered Powerchair.
Warnings
The warnings listed below should reduce the chance of unintended brake release
or powered Powerchair movement, which could result in serious injury.
1. Do not operate hand-held transceivers (transmitters-receivers) such as
citizens band (CB) radios, or turn on personal communication devices, such
as cellular phones, while the powered Powerchair is turned ON.
2. Be aware of nearby transmitters, such as radio or TV stations, and try to avoid
coming close to them.
Safety Guidelines
Your Powerchair is a powerful electric device. Please read the following notes
carefully to ensure safety at all times. Always make certain your Powerchair is in
full working order before use.
1. Do not exceed any incline over 6 °/ 10%
2. Do not use the joystick in an erratic manner when proceeding uphill or
downhill.
3. Do not turn off your Powerchair using the ON/OFF button when in motion.
This will set the brakes immediately and could cause damage to the controls
of the Powerchair.
4. Do not ride over deep, soft terrain such as loose dirt/gravel, tall grass etc.
5. Do not mount any curb height over 5 cm (2 inches).
6. Do not carry passengers.
7. Do not mount or dismount your Powerchair unless brakes are engaged and
the controls are off.
8. Do no operate your Powerchair when in “Freewheel” mode.
9. Do not operate your Powerchair on public roads.
10. Do not remain seated on your Powerchair when in a vehicle. Transfer to a
seat within the vehicle.
11. Do not adjust seat height while sitting on your Powerchair!
12. Always come to a full stop before making any sharp change of direction.
13. Always reduce to a slow speed when approaching and proceeding down
gradients. Moving your joystick slowly towards the central position will
reduce your speed.
14. Always approach curbs and gradients at a slow speeds.
5
15. Always keep your feet on the footplate when in motion.
16. Always use your safety belt.
17. Always keep your tires at the correct air pressure.
18. Always make certain that your batteries are fully charged before setting out
on your journey.
19. PLEASE GIVE CONSIDERATION TO PEDISTRIANS WHEN OPERATING
YOUR SHOPRIDER POWERCHAIR.
6
Preparation for Use
Your Powerchair has many features designed to provide you with maximum
comfort, and will be ready for immediate use upon assembly and delivery by your
dealer. Adjustments may then be made to the following parts:
1. Footplate may be lengthened outward from the main frame to four different
positions.
2. Footplate may be angled from 0°to 60°.
3. Armrests may be set at a variety of angles and/or lengths.
4. Arms may be increased in height.
5. Joystick control may be fitted for either right or left hand use.
6. Seat has four posts with adjustment pins.
7. Backrest angle may be adjusted from 90 to 102 °.
8. Make sure batteries are connected and charged at least 6-8 hours before
first use.
7
Features
WARNING: Seat adjustments must not be made while seated on your
Powerchair.
All other adjustments should be carried out while seated in your Powerchair.
Footrest Adjustment
Length
Pull out connecting pin from the first hole in
the footrest slide tube.
Slide out the footrest tube and refit the
connecting pin in the appropriate hole when
the required length is reached.
Height
Pull out the connecting pin located at the back of the footrest
slide tube. Position the footrest at the required height. Three
heights available. Refit the connecting pin in the appropriate
hole and make sure the connecting pin protrudes through he
other side of the tube and is secure.
Arm Adjustment
Angle
Pull up on ends of armrests, which will flip back to allow easy transfer in and out
of your seat. Under your armrests you will find a bolt and lock nut that may be
adjusted up or down to alter the angle of your armrests.
Length
Located under the armrest controller, you will find a hand knob. Loose the knob
to extend or reset the controller bracket.
8
Height
Below the armrest on the down supporting tube you will see a
button. Pull up on the button to raise or lower your armrest.
Width
Beneath the rear of the Powerchair seat you will locate two
hand knobs, one at each side of the seat. Release the hand
knobs and slide each armrest tube outward to desired width
and retighten hand knobs.
Seat Height Adjustment
Located on the main frame, the tube receiving the seat stem
has three height adjustment holes. By fitting of the steel bolt in
any one of the holes, three heights can be achieved.
Joystick Controller
Conversion
You can move the joy stock controller so the operator can use it with either their
left or right hand. Beneath the armrests there is a hand knob (same know to
adjust the armrests). Remove the hand knob completely and slide off the
armrests. You can now exchange the joystick control from one side to the other.
Extension or Retraction
Push the joystick controller outward and backward to store it at the side of the
Powerchair Arm. This allows easier access to tables, desks, etc.
9
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Eclipse Fauteuil roulant
