Eclipse CyberView MPW-19QD Manuel utilisateur
Manual ML34V02A -- Generation 4 -- www.EclipseRackmount.com
User Manual
Designed/Manufactured by Austin Hughes and Distributed by Eclipse Rackmount, Inc.
8U 19" Widescreen Quad Display Panel
MPW-19QD
Options Available:
- DC Power
Page 02 -- ML34V02A -- www.EclipseRackmount.com
Legal Information
First English printing, October 2002
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness
of the contents. The information in this document is subject to change without notice. We are not liable for any injury or
loss that results from the use of this equipment.
Safety Instructions
Please read all of these instructions carefully before you use the device. Save this manual for
future reference.
■Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
■Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with
temperatures not exceeding 40º Celsius (104º Fahrenheit).
■When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing
damage to other equipment or injury to persons nearby.
■When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the
power supply. Proper air convection is necessary to keep it from overheating.
■Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
■If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current
labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed
on the equipment’s ratings label.
■Observe all precautions and warnings attached to the equipment.
■If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being
damaged by transient over-voltage.
■Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power
supply or on other hardware may cause damage, fire or electrical shock.
■Only qualified service personnel should open the chassis. Opening it yourself could damage the equipment and
invalidate its warranty.
■If any part of the equipment becomes damaged or stops functioning, have it checked by qualified service personnel.
What the warranty does not cover
■Any product, on which the serial number has been defaced, modified or removed.
■Damage, deterioration or malfunction resulting from:
□Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or
failure to follow instructions supplied with the product.
□Repair or attempted repair by anyone not authorized by us.
□Any damage of the product due to shipment.
□Removal or installation of the product.
□Causes external to the product, such as electric power fluctuation or failure.
□Use of supplies or parts not meeting our specifications.
□Normal wear and tear.
□Any other causes which does not relate to a product defect.
■Removal, installation, and set-up service charges.
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
■Re-position or relocate the receiving antenna.
■Increase the separation between the equipment and receiver.
■Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Page 03 -- ML34V02A -- www.EclipseRackmount.com
< Part. 3 >
< Part. 4 >
Options
3.1 48V, 24V or 12VDC power P.7
< Part. 2 > Specifications / OSD
2.1 Product Specifications
2.2 On-Screen Display Operation ( OSD ) P.4 - 5
P.6
< Part. 1 > MPW-19QD
1.1 Package Contents
1.2 Structure Diagram & Dimensions
1.3 Installation
Contents
P.1
P.1 - 2
P.3
Contents
Quad Display Connection & Operation
4.1 QD Connection
4.2 QD ALARM Connection & Operation
4.3 QD Remote Control Connection & Operation
4.4 QD OSD Operation
4.5 QD On-Screen Menu
4.6 QD VCR Operation
4.7 QD Specification
P.8
P.9 - 10
P.11 - 15
P.16
P.17 - 19
P.20
P.20
Page 04 -- ML34V02A -- www.EclipseRackmount.com
Option : DC power
< 1.1 > Package Contents
< Part 1 >
MPW-19QD unit X 1
- 6ft VGA cable X 1
- Power adapter X 1
- Power cord X 1
< 1.2 > Structure Diagram
1
Front view
Rear view
4
Power adapter
Power cord
3
LCD panel
LCD OSD membrane
Quad display control membrane
Power adapter basket
1
2
2
4
3
Page 05 -- ML34V02A -- www.EclipseRackmount.com
MPW-19QD
< 1.2 > Dimensions
Front View Side View
UNIT : mm
1mm = 0.03937 inch
Bottom View
Model Product Dimension
(W x D x H)
Packing Dimension
(W x D x H)
Net
Weight
Gross
Weight
MPW-19QD 480 x 72.5 x 354.8 mm
18.9 x 2.9 x 14 inch 539 x 129 x 529 mm
21.2 x 5.1 x 20.8 inch 9.5 kg
20.9 lbs 12.5 kg
27.5 lbs
Page 06 -- ML34V02A -- www.EclipseRackmount.com
Setup
VCRSEQ
<
<
<>
QuadDisplayControlLCDOSD Menu
Setup
VCRSEQ
<
<
<>
Quad
Displ ay
ControlLCD
OSD
Menu
< 1.3 > Installation
Step
■Mount the display panel with M6 screw set.
■M6 screw x 8 pcs required ( Left & right side ).
M6 screw sets are not provided.
1
Step
■Fix the LCD into the rack.
2
Page 07 -- ML34V02A -- www.EclipseRackmount.com
MPW-19QD
Power Power Supply Range Auto-sensing 100 to 240VAC,
50 / 60Hz
Power Consumption Screen display ON 25W or less
Power saving mode 4W or less
Power button OFF 1W or less
Regulatory Safety Approval FCC & CE
Video
Connectivity Analog VGA Analog 0.7Vp-p
Environmental
Conditions
Operating Temperature 0 to 50°C degree
Humidity 20~90%, non-condensing
Storage Temperature -5 to 60°C degree
Humidity 5~90%, non-condensing
Shock 10G acceleration (11ms duration)
Vibration 5~500Hz 1G RMS random
LCD
Panel
Manufacturer
Panel Size ( diagonal ) 19-inch Widescreen TFT color LCD
Display pixel ( dots x lines ) 1440 x 900
Brightness ( typ. ) 250
Contrast Ratio ( typ. ) 1000:1
Color 16.7 M
ViewingAngle ( L/R/U/D ) 80/80/80/80
Response Time ( ms ) 5
Dot pitch ( mm ) 0.2835
Display Area ( mm ) 408.24H x 255.15V
Surface treatment Haze 25%, Hard-coating
Surface hardness 3H
Backlight Type LED
MTBF ( hrs ) 30,000
< 2.1 > Product Specifications
< Part 2 >
Page 08 -- ML34V02A -- www.EclipseRackmount.com
Physical
Specification
Product ( W x D x H ) 480 x 72.5 x 354.8 mm
18.9 x 2.9 x 14 inch
Packing ( W x D x H ) 539 x 129 x 529 mm
21.2 x 5.1 x 20.8 inch
Net Weight 9.5 kgs / 20.9 lbs
Gross Weight 12.5 kgs / 27.5 lbs
Applicable
Format
VGA Input PC Signal 1440 x 900 x 60Hz
1280 x 1024 x 60 / 75Hz
1280 x 960 x 60Hz
1280 x 760 x 60 / 75Hz
1152 x 864 x 75Hz
1024 x 768 x 60 / 70 / 75Hz
848 x 480 x 60Hz
800 x 600 x 60 / 72 / 75Hz
720 x 400 x 70Hz
640 x 480 x 60 / 72 / 75Hz
640 x 400 x 70Hz
640 x 350 x 70Hz
Page 09 -- ML34V02A -- www.EclipseRackmount.com
MPW-19QD
< 2.2 > On-Screen Display Operation ( OSD )
Exit the OSD screen
Toggle analog, digital & video connection (DVI-D and video options only)
Scrolls through menu options and adjusts the displayed control
(To auto adjustment by pressing the button for 5 seconds)
Display the OSD menu
Power on / off LCD
Power light
Green = On
Orange = Power saving
Membrane Switch Function
OSD Conf guration Page
Image:
for the brightness, contrast, color temp, red, green, and blue
Geometry:
for the auto adjust, H position, V position, phase and clock
Video:
for the colour, tint, sharpness, noise reduction, DCDi and TV Setup
Audio:
for volume, bass, treble, balance, AVL and mute
Misc:
for the language, OSD position, graphic mode, ratio, reset and timer
LCD OSD Menu
Page 10 -- ML34V02A -- www.EclipseRackmount.com
< 3.1 > Options : DC Power
Model 12V 24V 48V
Input rating
Input voltage: 12-Volt 24-Volt 48-Volt
Input range: 9 ~ 18V 18 ~ 36V 36 ~ 75V
Input current
- No load 50 mA 50 mA 50 mA
- Full load 4950 mA 2450 mA 1220 mA
Output rating
Output voltage: 12-Volt 12-Volt 12-Volt
Output current: 4.16A 4.16A 4.16A
Efficiency 84% 85% 85%
< Part 3 >
Table des matières
Autres manuels Eclipse Moniteur
