Ecler EMOTUS5P Manuel utilisateur

eMOTUS5P/eMOTUS5PB

SURFACE MOUNT CABINETS

Powered Loudspeakers - Stereo kit

USER MANUAL

INDEX

Important note 3

Precautions 3

Introduction 4

Key Features 4

Positioning and fitting 5

Start up 7

Remote control 8

Rear panel 10

Technical specifications 11

Packing content 12

IMPOR TANT NOTE

Congratulations. You now own the result of a well-designed, carefully produced

manufacture. We thank you for your trust by having chosen our set of powered

eMOTUS5P/eMOTUS5PB acoustic cabinets.

To achieve its maximum working order and performance, it is VERY IMPORTANT,

before connecting, to read this manual carefully. To guarantee optimum working

order, we recommend that maintenance be carried out by our authorized Technical

Services.

PRECAU TI ONS

Read these instructions

Keep these instructions

Heed all warnings

Follow all instructions

Do not use this apparatus near water

Clean only with dry cloth

Install in accordance with the manufacturer’s instructions

Do not install near any heat sources such as radiators or heat registers

Only use attachments/accessories specified by the manufacturer

Refer all servicing to qualified personnel

Warning: an inappropriate usage of the device could cause

injury, death or damage the apparatus.

INTROD UCTI ON

The eMOTUS5P / eMOTUS5PB is a kit of loudspeakers including an active and a

passive acoustic box. The eMOTUS5PB includes a wireless BT receiver, remote control

and remote control volume port (0-10 VDC). A compact, professional stereo kit, easy

to handle and at a very attractive price. Its fantastic performance and unique design

ensure that it can easily be integrated into a wide range of multimedia applications:

lecture halls, meeting rooms, outlets, etc. Available in black and white.

KEY FEATU RES

• Stereo 2-way loudspeaker stereo kit –powered loudspeaker + passive

loudspeaker

• Full range: 5” woofer and 1” tweeter

• Integrated amplifier 2 x 25 WRMS (MASTER unit)

• Volume control and tone control (bass & treble) in the MASTER unit

• Euroblock balance stereo input on the MASTER UNIT

• Non-balanced RCA input on the MASTER UNIT

• Wireless BT stereo input (only on the eMOTUS5PB)

• Mono/Stereo switch

• Link between the MASTER and the SLAVE unit via Euroblock connectors.

• Integrated power supply source (MASTER unit)

• Selectable power voltage 115 V/230 V (MASTER unit)

• Auto standby function (automatic standby mode / energy saving without the

need to turn the system on or off each day)

• Integrated Anti-Clip System

• LED activity display

• Reinforced ABS construction

• BT wireless connection, remote control port (0-10 VDC –RJ45 connector) and

remote control (eMOTUS5PB)

• Available in black and white

POSIT IONING A ND FITT ING

In the packing of the eMOTUS systems, you will find all you need to complete

installation of the two units.

The following should be observed as general rules:

Always install on solid, firm surfaces.

For good sound reproduction, there should be no hindrance between the

units and the audience.

Adjust the levels of sound pressure to reproduction requirements. Despite its

small size, the eMOTUS5P / eMOTUS5PB has a performance far higher than

that of domestic loudspeakers.

Procedure for installing on a surface:

1. Make three 6 mm screw holes in the wall, aligned with the position of the

holes in the bracket.

2. Insert three 6 mm wall plugs into the holes.

3. Fasten the safety line on the rear of the bracket.

4. Fit the bracket in place, after threading the line and loudspeaker wire through

the square hole in the bracket. Secure the bracket to the wall.

5. Connect the power supply cables, signal input and link between the two units

to the connectors on the rear part of the housing. Ensure correct polarity in

the Euroblock terminals.

6. Place the acoustic box in its final position, sliding it vertically downwards so

that the rear side of the rail slots into the bracket rail.

7. Secure the safety wire on the rear part of the acoustic box to ensure that it

does not accidentally fall and cause any material and/or personal damage.

8. Orientate the box to achieve the required position on the vertical and

horizontal axes. Tighten up the Allen screws on the bracket to fasten this

position on both axes.

START U P

eMOTUS5P

To start up the system, turn on the MASTER (L) unit with the switch on the rear

panel and adjust the volume and equalizer to the required settings.

You may select the audio source (balanced or non-balanced input) by pressing the

rotating volume encoder.

eMOTUS5PB

To start up the system, turn on the MASTER (L) unit with the switch on the rear

panel and adjust the volume and equalizer to the required settings. Pressing the

rotating volume encoder, the unit will be muted.

You can select the audio source (balanced, non-balanced input or wireless

connection) by pressing the relevant button on the remote control: BAL, UNBAL or

BT.

Wireless connection

Press the BT key to select the wireless connection mode. For pairing the BT, the

eMOTUS5BT is displayed on other devices as the eMOTUS5 (password:”0000”). Once

paired with the emitting device, the eMOTUS5PB will act as a receiver/reproducer of

the audio emitted by the former.

N.B. To safeguard the system from any possible power surges in the electrical

supply, there is a network fuse in the MASTER unit, located in a screw mount fuse

holder in the rear panel. In the event of this blowing, disconnect the device, remove

it from the wall bracket, unscrew the fuse holder, take out the fuse and replace it

with another with identical characteristics. If the new fuse blows straight away,

consult our Technical Department.

REMOTE CONTROL

Remote control (only applies to the eMOTUS5BT model)

1. Turn on: on/off. The green LED display lights up when the unit is on. When off,

no LED is displayed.

2. LED display: turn on/off the LEDs while the unit is operating. When restarting

the unit, this function returns to its default value: LEDs on.

3. MUTE. The red LED blinks on and off when the unit is muted.

4. BT: wireless connection. The blue LED light turns on when there is a BT

connection by pressing the BT key.

5. UNBAL: select the stereo unbalanced RCA input as the audio input source.

6. BAL: select the stereo balanced Euroblock input as the audio input source.

7. Volume: increase/decrease the volume in 1 step (range available in 0-36 steps).

This only operates when the unit is on.

8. Bass & Treble: increases/decreases by 1 dB (range available of -7 to +7dB) in

bass/treble.

9. BT priority: if priority is activated, whenever it detects a wireless connection

available, this will take priority over the other audio inputs and will

automatically switch over to this.

10. Auto Standby: keep pressed (for 2 secs.) to activate/deactivate the auto

standby function. If this is activated, after 2`30” with no audio in the inputs and

if the remote controlled is not used, the unit will switch to standby mode.

11. Reset: keep pressed (for 2 secs.) to reset the system to its default values: BT

priority ON, volume = 30 bass; treble = 0.

12. Flat: keep pressed (for 2 secs.) to reset the system to its default equalizer

values: bass = 0; treble = 0.

Remote port (only applies to the eMOTUS5BT model)

REMOTE port: the RJ-45 REMOTE type connector makes it possible to connect from

a type WPmVOL wall control panel (control 0-10 VDC) for adjusting the general

output volume. The connection is made by a standard CAT5 cable between the

WPmVOL wall panel and the REMOTE connector on the MASTER unit.

As there is an eMOTUS5PB kit along with a type WPm control and other types of

control (rotating control on the rear panel, remote control or control via remote

port), at all times, the latest adjustments made using one or another method will

prevail. For instance, if the volume is adjusted using a WPmVOL wall panel

connected to the REMOTE port, and then said parameters are altered using the

control on the rear panel, the latest adjustment will prevail. In this case, when the

position of the wall panel is altered again, the eMOTUS5PB kit will retake the values

that this indicates, and so on.

N.B. the green LED light will keep on whenever the unit is on. It will blink on and off

when there is activity in the remote controls (remote control or 0-10VDC port).

REAR PANEL

1. Output volume control

2. Bass control

3. Treble control

4. Stereo-mono switch

5. Remote input RJ-45. Only applies to the eMOTUS5BT model

6. Balanced audio input - Euroblock connectors

7. Non-balanced audio input –RCA connectors

8. Attachment point for the safety cable

9. Socket base

10. Amplified output right channel R

11. Mains selector (115V / 230V)

12. Start up switch

13. Fuse holder

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Ecler Amplificateur

Ecler

Ecler VEO-SPH42 Manuel utilisateur

Ecler

Ecler UMA SB118 Manuel utilisateur

Ecler

Ecler eHSA2-250 Manuel utilisateur

Ecler

Ecler XPA7000 Manuel utilisateur

Ecler

Ecler SAM612T Manuel utilisateur

Ecler

Ecler CA200z Manuel utilisateur

Ecler

Ecler MPA6-150 Manuel utilisateur

Ecler

Ecler CA40 Manuel utilisateur

Ecler

Ecler APA600 Manuel utilisateur

Ecler

Ecler MPA4-80R Manuel utilisateur

Ecler

Ecler HSA2-400ES Manuel utilisateur

Ecler

Ecler CA120HZ Manuel utilisateur

Ecler

Ecler CA120HZ Manuel utilisateur

Ecler

Ecler MPA6-80R Manuel utilisateur

Ecler

Ecler eHSA SERIES Manuel utilisateur

Ecler

Ecler eCA120HZDN Manuel utilisateur

Ecler

Ecler Dante VIDA-24Q Manuel utilisateur

Ecler

Ecler CA40 Manuel utilisateur

Ecler

Ecler AMBIT 108 Manuel utilisateur

Ecler

Ecler HMA120 Manuel utilisateur

Ecler

Ecler eWAMPBT+ Manuel utilisateur

Ecler

Ecler CA120 Manuel utilisateur

Ecler

Ecler HZA4-70F Manuel utilisateur

Ecler

Ecler MPA280 Manuel utilisateur

Manuels Amplificateur populaires d'autres marques

ASTRO

ASTRO HVO V40 P Manuel utilisateur

Marantz

Marantz SUPERSCOPE BLA-545 Instructions de montage

NAD

NAD CI980 Manuel utilisateur

Technics

Technics SE-CH770 Manuel utilisateur

Harman Kardon

Harman Kardon HK6300 Manuel utilisateur

NAD

NAD T975 Manuel utilisateur

McIntosh

McIntosh MA6850 Manuel utilisateur

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Manuel utilisateur

Viatron

Viatron Autrix Manuel utilisateur

GME

GME GA9800 Manuel utilisateur

Atlas

Atlas CP700 Manuel utilisateur

Roland

Roland KC-1000 Manuel utilisateur

Pyle

Pyle PFMRA350BW Manuel utilisateur

Advantage

Advantage S-250 Manuel utilisateur

IRT Electronics

IRT Electronics DVA-3007 Manuel utilisateur

Dimavery

Dimavery BA-100 Series Manuel utilisateur

Sony

Sony XM-S400D Manuel utilisateur

Schertler

Schertler ROY X Manuel utilisateur

Ecler eMOTUS5P Manuel utilisateur

Manuels Amplificateur populaires d'autres marques