6 7
tel - 866-931-8021
tel - 866-931-8021
POWER CONNECTION
STEP 2:
Insert the EchoMaster EFS-ODC power cable into the vehicle’s diagnostic
port rmly pressing to ensure a good connection.
CABLE ROUTING
STEP 3:
Route the EFS-ODC power cable up the driver’s side dashboard towards the
center of the windshield using the Trim stick provided in the kit and tuck the
extra wire into the dashboard and windshield seem.
STEP 4:
Route the power cable wire up the back of the windshield mount pressing
the cable into the groove in the bracket.
Attach the camera to the magnetic mount.
SETTING UP THE CAMERA
STEP 5:
Once everything is connected start the vehicle and allow it to run for 5
minutes allowing the Camera time to connect to the cellular network.
Connect to the EchoMaster eet monitor website and conrm that you can
view the Live video stream feature NOTE: You must associate the device
with a vehicle within the EchoMaster eet monitor website
Cellular 4G LTE
Bluetooth Low Power 4.2
Audio Stereo Mic / Mono Speaker
Languages English
Power 12 - 14 Volts DC
Camera Resolution 1440p Exterior and 720p Interior
Auto Shut Off 72 hours with key off
Operating Temperatures -4° F - 120° F
Internal Video Recording Time 120 Hours
SPECIFICATION CHART
