EN
Thank you for choosing Ebeco. We hope that you will enjoy
your underfloor heating system for a long time to come. For
the warranty to apply, the product must be installed and
operated according to this manual. It is therefore important
that you read the manual.
If you have questions, you are of course always welcome to
contact Ebeco. Call 031-707 75 50 or send an email to
information.
Welcome
• For the warranty to apply, the warranty certificate must be
correct and completely filled out.
• Check that the foil is marked with 48V.
• The floor must be stable, smooth, clean and without
failure. All material in the floor must be well dried. In the
case of tiling on chipboard or wooden floors, the floor
must normally be reinforced with plasterboard, putty or
the like according to current industry regulations.
Concrete floors are sanded. For concrete floors with a
risk of moisture, this system is not suitable, as the glue
can dissolve and the foil is damaged.
• In wet rooms, the foil must be placed under the moisture
barrier.
• The foil must be protected against mechanical damage.
The floor covering must be carried out immediately after
the foil installation.
• Crimping pliers E 89 606 90 must be used for the warranty
to apply.
• The foil must not be placed under fixed furnishings, e.g.
kitchen counters, wardrobes, interior walls etc. as it causes
elevated temperature.
• Insulating furnishings such as thick carpets or seat
cushions must not be present.
• Maximum load/foil/cable max 10A. In case of larger
load than 10A, the foils are split and fused on the
secondary side of the transformer.
Important
