EAW AC6 Manuel utilisateur

Autres manuels pour AC6

3

Table des matières

Manuels Intervenants populaires d'autres marques

argon audio

argon audio IE20 Manuel utilisateur

Denon

Denon SC-N7 Manuel utilisateur

Gemline

Gemline Ace 3952 Manuel utilisateur

Focal

Focal ON WALL 300 Mode d’emploi

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuel utilisateur

SoundLogic

SoundLogic BCCS-6/6395 Manuel utilisateur

Peavey

Peavey DTH 218 Manuel utilisateur

Avantree

Avantree Pluto Air Manuel utilisateur

Morel

Morel Integra Series INTEGRA OVATION 4 Manuel utilisateur

Oppo

Oppo SONICA Manuel utilisateur

Bose

Bose SoundLink Wireless Music System Manuel utilisateur

Rocksteady

Rocksteady Stadium Manuel utilisateur

Bowers & Wilkins

Bowers & Wilkins 4 Manuel utilisateur

Sonance

Sonance SONOS OUTDOOR Series Manuel utilisateur

Electro-Voice

Electro-Voice EVID FM4.2 Manuel utilisateur

Pioneer

Pioneer XW-HTD630 Manuel utilisateur

Onn

Onn BWA16AA002 Manuel utilisateur

HP

HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur

Tel 800 992 5013 / +1 508 234 6158

|

www.eaw.com 1

AC6 Stacking Plate Instructions

These instructions are to provide a detailed step by step procedure for using the AC6

Stacking Plates.

Inventory your kit

Part # Part Name Quantity Reference

2071927-9999 PLATE LOCKING ASSY 1 A

2071924 M5X20 FLH SKT SS BLK - Use w/Reference A 3 per assembly B

2071924 M5X20 FLH SKT SS BLK 4 per plate B

2071918-9999 Slide Plate 2 C

2071929-9999 MOUNT PLATE ASSY AC6 1 D

2071920 SCREW M20X40 HHCS SS BLK OX 1 E

2071922 WASHER CURVED LOCK M20X34mm 1 F

2071923 WASHER FLAT M20 X 60mm OD SS BLK OX 1 G

0022095 SCREW M6 X 55 SHCS BLK 4 per assembly H

105059 WASHER SPLIT-LOCK M6 SS BLK 4 per assembly I

2071921 WASHER FLAT M6 X18mm OD SS BLK OX 4 per assembly J

D

C

A

B E H

IF

G J

Tel 800 992 5013 / +1 508 234 6158

|

www.eaw.com 2

AC6 Stacking Plate Instructions

• M3 Allen Wrench

• M4 Allen Wrench

• 30mm Wrench

Required Tools & Supplies

Prepare AC6 for Stacking

1. Attach Locking Plate (A) to the top of the rst AC6 (If using with subwoofer mount

plate, follow instructions in step 2 to attach slide plate to bottom of rst AC6)

• Remove 3x M5x12mm screws from top of AC6 (Figure 1).

• Position Locking Plate over open holes, then use screws (B) to secure plate to

the cabinet (Figure 2)

Figure 3 - Remove screws Figure 4 - Install Slide Plate

2. Attach slide plate (C) to bottom of next AC6

• Remove 4x M5x12mm screws from bottom of AC6 (Figure 3).

• Position Slide Plate over open holes, then use screws (B) to secure plate to the

cabinet (Figure 4)

Figure 1 - Remove screws Figure 2 - Install Locking Plate

Tel 800 992 5013 / +1 508 234 6158

|

www.eaw.com 3

AC6 Stacking Plate Instructions

Prepare Subwoofer Mount Plate for Stacking (if applicable)

3. Attach Mount Plate (D) to the top of SBX218/SBX118/RSX18F (Figure 5)

• Remove M6x35mm screws from subwoofer pole mount.

• Place Mount Plate on top of subwoofer, aligning hole Awith pole cup.

• Lock into place with M6 screws (H), lock washer (I) and at washer (J)

• Secure mount with M20 Screw (E), lock washer (F) and at washer (G)

Figure 5 - Attach Mount Plate Figure 6 -Mount Plate installed

Congure AC6 Column on Subwoofer Mount Plate

4. Attach rst AC6 to Subwoofer with mount plate

• Using two people, lift AC6 and line up bottom slide plate with subwoofer

mount plate

• Slide into place (Figure 7). An audible clicking sound may be heard if pins are

not in up position.

• On rear of mount plate, rotate both pin knobs clockwise to lock into position.

Figure 7 - Slide rst AC6 to

mount plate

Figure 8 -AC6 Installed on mount

plate

Tel 800 992 5013 / +1 508 234 6158

|

www.eaw.com 4

AC6 Stacking Plate Instructions

Connect two AC6 Column loudspeakers with stacking plates

5. Attach two AC6 columns (Procedure is the same whether using Subwoofer

Mounting Plate or not)

• Ensure rst AC6 (bottom position) is standing at on a surface or locked into

place with the subwoofer mounting plate.

• If connecting a second AC6 on a subwoofer stack, using two steady ladders

and two people, lift second AC6 and line up slide plate with the rst AC6

locking plate.

• If connecting the second AC6 to rst AC6 without utilizing the subwoofer

mount plate, a ladder may not be needed. Still using two people, position

second AC6 slide plate to line up with rst AC6 locking plate.

• Slowly slide into plate until an audible click is heard. (Figure 9)

• On rear of rst AC6 locking plate, rotate both screw knobs clockwise to lock

into position.

• When using subwoofer mounting plate, only two AC6's are supported.

Figure 9 - Attach AC6 columns