Eaton Cutler Hammer CHAUDC65 Manuel utilisateur
CHAUDC65
In-Wall Audio Speakers
INSTALLATION GUIDE
1000 Cherrington Parkway, Moon Township, PA 15108
1.800.525.2000 www.cutlerhammer.com
CSCHAUDC65
Eaton │Cutler-Hammer
Installing the Cutler-Hammer CHAUDC65 In-Wall Audio Speakers
1. After opening the box, locate the speaker installation template. Use
this template to cut a hole in the sheetrock.
2. To install the speakers, you must first remove the speaker grill. Push
in one of the four mounting arms on the rear of the speaker. This will
force the mounting arm screw into the grill and pop it off.
Mounting Arm Mounting Arm Screw
CHAUDC65 Installation Guide Page 1
Eaton │Cutler-Hammer
CHAUDC65 Installation Guide Page 2
3. Connect the RIGHT and LEFT channel speaker wire to the red and
black input connectors on the rear of the speaker. Insert the negative
wire in the black and the positive wire in the red.
Speaker Input
Red = Positive
Black = Negative
4. Insert the speaker into the hole. Tighten the Mounting arm screws until
the mounting arms press snug against the back of the sheetrock. Re-
insert the speaker grill.
Table des matières
Autres manuels Eaton Intervenants
Eaton
Eaton Wheelock E70H Manuel d'instructions
Eaton
Eaton Cutler-Hammer ESWA0800SC Manuel utilisateur
Eaton
Eaton DB4B UL Manuel utilisateur
Eaton
Eaton DB4B Manuel utilisateur
Eaton
Eaton CROUSE-HINDS DB4BM UL Manuel utilisateur
Eaton
Eaton DB4BM Manuel utilisateur
Eaton
Eaton MC6-EN Manuel utilisateur
Eaton
Eaton MC5-EN Manuel utilisateur
Eaton
Eaton MC5-EN Manuel utilisateur
Manuels Intervenants populaires d'autres marques
Bowers & Wilkins
Bowers & Wilkins 4 Manuel utilisateur
Sonance
Sonance SONOS OUTDOOR Series Manuel utilisateur
Electro-Voice
Electro-Voice EVID FM4.2 Manuel utilisateur
Pioneer
Pioneer XW-HTD630 Manuel utilisateur
Onn
Onn BWA16AA002 Manuel utilisateur
HP
HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur