Eaton BiWire Ultra EF009SB Manuel utilisateur

EF009SB 1, EF009SBWP 2, EF009 3, EF009WP 4

BiWire Ultra Range (Conventional compatible) Effective October 2019

Installation Instructions

INSTALLATION INSTRUCTIONS 25-12766-G October 2019

DoP0010

DoP 0011

DoP0012

DoP0013

Specication

Supply voltage (BiWire alarm) 25.5~35 Vdc

Supply voltage (BiWire standby) 18~25.5 Vdc

Supply voltage (conventional) 18~35 Vdc

Cable size/type 0.5~2.5mm2/FIRETUF, FP200 or MICC

Standby current (BiWire mode) <15μA

Current (high volume) Sdr only = 4.7mA, AV = 11mAx

Current (low volume) Sdr only = 2.6mA, AV = 8.7mA

Sound output (high volume)* 89 +/- 3dB(A) : All tones

Sound output (low volume)* 99 +/- 3dB(A) : All tones

89 +/- 3dB(A) : All tones

Operating temperature -25 to +70ºC (93% ± 3%RH)

Material ABS FR plastic

Environmental category Type A= IP21C/ Type B= IP66

Tones 3, See section 3

Flash rate 0.5Hz (N/A to EF009(WP))

Flash on period 60ms (N/A to EF009(WP))

The devices have no serviceable component so no maintenance

is required. *For full tone and polar node SPL data please refer

to M14-002.

EN54-3:2001+A1:2002+A2:2006

EN54-23:2010

0905

Wall sounder/beacon

Wall sounder

Wall sounder/beacon IP66

Wall sounder IP66

2. Connection details

1a. Mounting base (IP21C) 1b. Mounting base (IP66C)

(i) Drill required holes for

cable gland ﬁxing.

(iii) Fix to mounting surface

using two suitable screws.

(ii) Drill out the required

ﬁxing holes.

Drill position for rear

cable entry

Drill position for

glands

50 (IP33)

75 (IP66)

97 (IP66)

62 (IP33)

(i) Drill required holes for cable gland ﬁxing (top or bottom)

and ensure glands are suitable for required IP rating.

(ii) Fix to mounting surface using four suitable screws.

Drill position

for glands

Use these four holes

to ensure IP66 integrity

1 2 3 4 5

Off

3. Switch position meaning

1, Sounder on/off (AV version only)

2, Volume high (Off)/low (On)

3, Tones

4, Tones

5, Mode: On = BiWire, Off = Conventional

Continuous: 3=On, 4=On (984Hz)

Bell: 3=On, 4=Off (1440Hz)

Alternating: 3=Off, 4=On (644/984Hz)

{

OUT IN

SCREEN ZONE OUT ZONE IN

+VE -VE +VE -VE

ZONE OUT

ZONE IN

Screen must be continuous along entire length of line.

Note

All products meet minimum requirements of IP33C in

accordance with EN54-3.

Installation & User Guide

Effective October 2019

INSTALLATION INSTRUCTIONS 25-12766-G October 2019

Eaton

EMEA Headquarters

Route de la Longeraie 7

1110 Morges, Switzerland

Eaton.eu

TEL: +44 (0) 1302 321541

FAX: +44 (0) 1302 303220

[email protected]

Firetec[email protected]

Eaton is a registered trademark.

All trademarks are property

of their respective owners.

www.Eaton.com

Eaton Electrical Systems Ltd.

Wheatley Hall Road

Doncaster

DN2 4NB

TEL: +44 (0) 1302 303303

FAX: +44 (0) 1302 367155

6a. Sounder assembly (WP)

5b. Dimensions

5a. Sounder assembly

106

100 110

110

(i) Clip sounder onto base.

(ii) Ensure cables do not

put stress on the PCB.

Key

Holes

To unlock use

key provided

(i) Location ribs must align on base and sounder.

(ii) Ensure cables do not

put stress on the PCB.

(iii) Bolt sounder to base.

Ribs

6b. Dimensions (WP)

4. VAD coverage area

Cross section

view (metres)

Product

3.2m

Wall mounted 3D

view

Cross Section

plane

Notes.

The devices have no serviceable component so no maintenance is required.

*For full tone and polar node SPL data please refer to M14-002.

Ce manuel convient aux modèles suivants

Autres manuels Eaton Système de sécurité

Eaton

Eaton FX6100 Manuel utilisateur

Eaton

Eaton Menvier 20 Manuel utilisateur

Eaton

Eaton Symphoni LX Base Manuel utilisateur

Eaton

Eaton XB15 Manuel utilisateur

Eaton

Eaton XB10 Manuel utilisateur

Eaton

Eaton RTK 725B range Manuel utilisateur

Eaton

Eaton EVT-300 Manuel d'installation et d'exploitation

Eaton

Eaton 415-TF Manuel

Eaton

Eaton menvier300 Manuel utilisateur

Eaton

Eaton Activeline GH5 Manuel utilisateur

Eaton

Eaton i-on40 Manuel utilisateur

Eaton

Eaton Funke+Huster Fernsig TWIN-EExll Manuel utilisateur

Eaton

Eaton Crouse-hinds series Manuel utilisateur

Eaton

Eaton i-on16 Manuel utilisateur

Eaton

Eaton SDR-REXT Manuel utilisateur

Eaton

Eaton MEDC BG2 Exe Manuel utilisateur

Eaton

Eaton MENVIER30 Manuel utilisateur

Eaton

Eaton 414-CTF Manuel

Eaton

Eaton 423-TF Manuel

Eaton

Eaton SDR-WEXT Manuel utilisateur

Eaton

Eaton BiWire Ultra Manuel utilisateur

Eaton

Eaton Crouse-hinds series Guide de l'utilisateur

Eaton

Eaton Scantronic i-on10 Manuel utilisateur

Eaton

Eaton i-on30EXL Manuel utilisateur

Manuels Système de sécurité populaires d'autres marques

Inner Range

Inner Range Concept 2000 Manuel utilisateur

Climax

Climax Mobile Lite R32 Instructions de montage

CADDX

CADDX NX-6 Manuel utilisateur

FBII

FBII XL-31 Series Manuel utilisateur

Johnson Controls

Johnson Controls PENN Connected PC10 Manuel utilisateur

Aeotec

Aeotec Siren Gen5 Manuel utilisateur

Blaupunkt

Blaupunkt SA 2700 Manuel utilisateur

IDEAL

IDEAL Accenta Manuel du propriétaire

AJAX

AJAX DoubleButton Manuel utilisateur

Swann

Swann SW-P-MC2 Manuel utilisateur

Ecolink

Ecolink Siren+Chime Manuel utilisateur

Digital Monitoring Products

Digital Monitoring Products XR150 Manuel utilisateur

EDM

EDM Solution 6+6 Wireless-AE Manuel utilisateur

Highway Safety Group

Highway Safety Group EA401 Manuel utilisateur

Siren

Siren LED GSM Manuel utilisateur

Detection Systems

Detection Systems 7090i Instructions de montage

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuel utilisateur

Siemens

Siemens FDM273 Manuel utilisateur