Eaton TRIPP LITE Series Manuel utilisateur
1
Owner’s Manual
Español 9
Français 17
Deutsch 25
Italiano 33
Purchased product
may differ from image.
Models:
B203-101-IND
B203-101-IND-ER
B203-104-IND
B203-104-IND-ER
Industrial USB over Cat5/
Cat6 Extender Kits
Metal Cases and ESD Protection
2
• The B203-101-IND and the B203-104-IND extend
USB 2.0 signals up to 150 ft. (45 m) from the source
• The B203-101-IND-ER and the B203-104-IND-ER extend USB
2.0 signals up to 330 ft. (100 m) from the source
• The B203-104-IND and B203-104-IND-ER allow you to connect
up to four USB 2.0 devices
• B203-101-IND and B203-104-IND support USB 2.0 data
transfer rates up to 480 Mbps
• B203-101-IND-ER and B203-104-IND-ER support USB 2.0 data
transfer rates up to 300 Mbps
• Power over Cable (PoC) technology provides power to
the transmitter unit via Cat5/Cat6 cable
• Backward compatible with USB 1.1
• Plug-and-play; no software or drivers required
• Compatible with all major operating systems
• B203-101-IND, B203-101-IND-ER, B203-104-IND or
B203-104-IND-ER Extender Kit (Transmitter and Receiver)
• DIN Rail Mounts (x2)
• M4 Screws (x4)
• RS-232 Phoenix Adapter
• International Power Supply (Input: 100V to 240V) with Plug
Adapters for North America, Europe, U.K. and Australia
• Owner’s Manual
Product Features
Package Includes
3
• N202-Series Cat6 Snagless Patch Cables
• U022-Series USB 2.0 Cables
• UR022-Series Reversible USB 2.0 Cables
• U030-Series USB 2.0 5-Pin Mini-B Cables
• UR030-Series Reversible USB 2.0 5-Pin Mini-B Cables
• U050-Series USB 2.0 Micro-B Cables
• UR050-Series Reversible USB 3.0 Micro-B Cables
Note: Test to make sure that the entire installation works properly before
pulling cables through ceilings or walls.
1. Connect the transmitter unit to an available USB port on your
computer with a USB 2.0 cable.
2. Connect the RJ-45 ports on the transmitter and receiver units
with Cat5e/Cat6 cable.
Notes:
• For the B203-101-IND and B203-104-IND models, the distance
between the transmitter and receiver units must not exceed 150 ft.
(45 m).
• For the B203-101-IND-ER and B203-104-IND-ER models, the distance
between the transmitter and receiver units must not exceed 330 ft.
(100 m).
3. Connect a USB 2.0 device to each available port on the
receiver unit.
Optional Accessories
Installation
4
Installation
4. For the B203-101-IND-ER and B203-104-IND-ER models,
connect the included external power supply to the receiver
unit and then to an AC outlet using the correct plug adapter.
(Optional) External power (9V to 36V) can also be added by
using the RS-232 Phoenix connector.
Note: Only one power source should be connected to the receiver
unit(s), never both.
5. For the B203-101-IND and B203-104-IND models only:
(Optional) if connecting power-hungry device(s), use either
the included external power supply or RS-232 Phoenix
connector to add external power.
Note: Only one power source should be connected to the receiver
unit(s), never both.
5
Installation Diagrams
TX
UTP , 50M
RX
DC 9~36V UTP , 50M
TX
UTP , 50M
RX
DC 9~36V UTP , 50M
B203-101-IND/B203-101-IND-ER
B203-104-IND/B203-104-IND-ER
Transmitter
Transmitter
Workstation
Workstation
USB Cable
USB Cable
24 AWG Solid Cat6 Cable (such as N202-Series),
up to 150 ft. (45 m) for the B203-101-IND and
up to 330 ft. (100 m) for the B203-101-IND-ER
24 AWG Solid Cat6 Cable (such as N202-Series),
up to 150 ft. (45 m) for the B203-104-IND and
up to 330 ft. (100 m) for the B203-104-IND-ER
USB Cable
USB Cable
Web Cam
Web Cam
Printer
Hard Drive
Mouse
5V/2A
5V/2A
Screwed type or
Phoenix type
Screwed type or
Phoenix type
Receiver
Receiver
For the B203-101/104-IND models only: when connecting
power-hungry device(s), use either the included external power
supply or RS-232 Phoenix connector to add external power.
Note: Only one power source should be connected to the receiver unit(s),
never both.
6
Specications
Specication
B203-101-IND/
B203-101-IND-ER
B203-104-IND/
B203-104-IND-ER
Supported USB
Versions
USB 2.0 (480 Mbps)
USB 1.1 (12 Mbps)
Transmitter Ports (1x) RJ-45
Receiver Ports 1x) RJ-45
(1x) USB-A
(1x) USB Micro-B
(1x) RJ-45
(4x) USB-A
(1x) USB Micro-B
Transmitter Plug USB-A
Maximum
Extension Distance
B203-101-IND/B203-104-IND:
150 ft. (45 m)
B203-101-IND-ER/B203-104-IND-ER:
330 ft. (100 m)
Operating
Temperature
32°F to 122°F (0°C to 50°C)
Storage
Temperature
-4°F to 158°F (20°C to 70°C)
Transmitter
Dimensions
[H x W x D]
1.06 x 4.53 x 2.46 in.
(27 x 115 x 62.4 mm)
Receiver
Dimensions
[H x W x D]
1.06 x 4.53 x 2.46 in.
(27 x 115 x 62.4 mm)
7
Warranty
1-Year Limited Warranty
We warrant our products to be free from defects in materials and workmanship for a
period of one (1) year from the date of initial purchase. Our obligation under this warranty
is limited to repairing or replacing (at its sole option) any such defective products. Visit
Tripplite.Eaton.com/support/product-returns before sending any equipment back for
repair. This warranty does not apply to equipment which has been damaged by accident,
negligence or misapplication or has been altered or modied in any way.
EXCEPT AS PROVIDED HEREIN, WE MAKE NO WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. Some states do not permit limitation or exclusion of implied warranties;
therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the purchaser.
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL WE BE LIABLE FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS
PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Specically, we are
not liable for any costs, such as lost prots or revenue, loss of equipment, loss of use of
equipment, loss of software, loss of data, costs of substitutes, claims by third parties, or
otherwise.
FCC Notice, Class B
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Any changes or modications to this equipment not expressly approved by Eaton could
void the user's authority to operate this equipment.
8
Warranty
WEEE Compliance Information for Customers and Recyclers
(European Union)
Under the Waste Electrical and Electronic Equipment (WEEE) Directive and
implementing regulations, when customers buy new electrical and electronic
equipment from Eaton, they are entitled to:
• Send old equipment for recycling on a one-for-one, like-for-like basis (this
varies depending on the country)
• Send the new equipment back for recycling when this ultimately becomes
waste
Eaton has a policy of continuous improvement. Specications are subject to change
without notice.
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
© 2023 Eaton
All Rights Reserved
Publication No. 23-08-181 /
93-3C77_RevB
August 2023
Eaton is a registered
trademark.
All trademarks are property
of their respective owners.
9
Manual del Propietario
English 1
Français 17
Deutsch 25
Italiano 33
El producto comprado
puede diferir de la imagen.
Modelos:
B203-101-IND
B203-101-IND-ER
B203-104-IND
B203-104-IND-ER
Juego Extensor Industrial
USB sobre Cat5 y Cat6
Caja de Metal y Protección ESD
10
• El B203-101-IND y el B203-104-IND extienden
señales USB 2.0 hasta a 45.72 m [150 pies] de la fuente
• El B203-101-IND-ER y el B203-104-IND-ER extienden señales
USB 2.0 hasta a 100 m [330 pies ] de la fuente
• El B203-104-IND y el B203-104-IND-ER le permiten conectar
hasta cuatro dispositivos USB 2.0
• B203-101-IND y B203-104-IND soportan velocidades de
transferencia de datos USB 2.0 de hasta 480 Mbps
• B203-101-IND-ER y B203-104-IND-ER soportan velocidades de
transferencia de datos USB 2.0 de hasta 300 Mbps
• La tecnología PoC proporciona energía a
la unidad transmisora mediante cable Cat5 y Cat6
• Es compatible con USB 1.1
• Conectar y Usar—No requiere software ni controladores
• Compatible con los principales sistemas operativos.
• Juego Extensor B203-101-IND, B203-101-IND-ER, B203-104-
IND o B203-104-IND-ER (Transmisor y Receptor)
• Soportes para Riel DIN (x2)
• Tornillos M4 (x4)
• Adaptador Phoenix RS-232
Características del Producto
El Paquete Incluye
Autres manuels pour TRIPP LITE Series
23
Ce manuel convient aux modèles suivants
4
Table des matières
Langues :
Autres manuels Eaton Extenseur
