Eaton Powerware Series Manuel utilisateur

Autres manuels pour Powerware Series

12

Table des matières

Autres manuels Eaton Accessoires

Eaton

Eaton GridAdvisor II Series Manuel utilisateur

Eaton

Eaton GFX Manuel utilisateur

Eaton

Eaton Comet Series Manuel

Eaton

Eaton CurrentWatch EGF Series Manuel

Eaton

Eaton 450-N Manuel

Eaton

Eaton E55 Series Manuel

Eaton

Eaton E65 SM Series Manuel

Eaton

Eaton WSPS 05 Manuel utilisateur

Eaton

Eaton E56M Manuel

Eaton

Eaton E52 Series Manuel

Eaton

Eaton Metalux Manuel utilisateur

Eaton

Eaton CurrentWatch EGFL Series Manuel

Eaton

Eaton xComfort CSEZ-01/18 Manuel utilisateur

Eaton

Eaton CurrentWatch ECSJ Series Manuel

Eaton

Eaton 50 Series Manuel utilisateur

Eaton

Eaton xComfort CBMA-02/01 Manuel utilisateur

Eaton

Eaton E55 Series Manuel

Eaton

Eaton CurrentWatch EGF Series Manuel utilisateur

Eaton

Eaton CWPD Series Manuel utilisateur

Eaton

Eaton iProx Series Manuel d'instructions

Eaton

Eaton Cutler-Hammer iProx Series Manuel d'instructions

Eaton

Eaton ePDU G3 Mode d’emploi

Eaton

Eaton CurrentWatch EDC Series Manuel

Eaton

Eaton CurrentWatch EGF Series Manuel utilisateur

Manuels Accessoires populaires d'autres marques

Hillco

Hillco 2810 Manuel utilisateur

Siemens

Siemens QSA2700D Manuel de l'opérateur

Contours

Contours ZY024 Manuel utilisateur

Saivod

Saivod VS621 Manuel utilisateur

Virtuox

Virtuox VirtuCLEAN 2.0 Manuel utilisateur

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuel utilisateur

Z-Wave

Z-Wave HSD-200Z Manuel utilisateur

turck

turck FMX-IM-2UPLI63FX Manuel utilisateur

Decagon Devices

Decagon Devices 10HS Manuel utilisateur

UPPAbaby

UPPAbaby Cup Holder Manuel utilisateur

Elko

Elko SmartSensor Leakage Wireless Manuel utilisateur

Grizzly

Grizzly H8371 Manuel utilisateur

Panasonic

Panasonic HG-T Series Manuel utilisateur

IFM Electronic

IFM Electronic Efector 250 Series Guide de référence

DigiDesign

DigiDesign 888/24 I/O Manuel utilisateur

PROZIS

PROZIS QUAY Manuel utilisateur

patagonia

patagonia PSI Vest Manuel utilisateur

SFC Energy

SFC Energy EFOY GO! Manuel utilisateur

Powerware Vibration Sensor

User’s Guide

®

Powerware is a registered trademark of Eaton Electrical Inc.

ECopyright 2007 Eaton Corporation, Raleigh, NC, USA. All rights reserved. No part of this document may be

reproduced in any way without the express written approval of Eaton Corporation.

EATON Powerware®Vibration Sensor User’s Guide S164201681 Rev 1 3

Vibration Sensor

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

This manual contains important instructions that you should follow during installation and

maintenance of the vibration sensor. Please read all instructions before operating the equipment

and save this manual for future reference.

The vibration sensor is a device that works with the Eaton Powerware

Environmental Rack Monitor (ERM) and connects to the TH-Module.

Through the ERM, the user can monitor if there is any situation of

vibration.

Recommended Location of Vibration Sensors

SThe vibration sensor is designed for protecting against forced entry by

hammer, saw, crowbar, etc. through walls, ceilings, windows, safes,

cabinets, etc. It is used in closed-circuit alarm systems and initiates

an alarm when a vibration of considerable force strikes the protected

surface.

SThe vibration sensor detects shock of movement. If you want

something kept still, you can stick the vibration sensor on the surface

of the object to detect and alarm the movement of the object.

VIBRATION SENSOR

EATON Powerware®Vibration Sensor User’s Guide S164201681 Rev 1

4

Installation

To install the vibration sensor:

1. Loosen the screws on the TH-Module (see Figure 1).

Alarm 1 Alarm 2

Figure 1. Adjusting TH-Module Screws

2. Connect the vibration sensor wires to the TH-Module alarm 1 or

alarm 2 connectors, then tighten the TH-Module screws (see

Figure 2).

Red Vibration Sensor Wire Black Vibration Sensor Wire

Figure 2. TH-Module with Vibration Sensor Wires

3. Connect the other end of the vibration sensor wires to the vibration

sensor (see Figure 3).

Red Vibration Sensor Wire

Black Vibration Sensor Wire

Figure 3. Vibration Sensor

VIBRATION SENSOR

EATON Powerware®Vibration Sensor User’s Guide S164201681 Rev 1 5

4. Connect the RJ-45 network cable to the TH-Module port labeled

“010101“ (see Figure 4).

Figure 4. Connecting the RJ-45 Network Cable

5. Connect the other end of the RJ-45 network cable to the ERM (see

Figure 5).

TH-Module

12

TH-Module-1 TH-Module-2NETWORK RESET 12 VDC

To LAN port To Power Outlet

ERM

Figure 5. ERM and TH-Module

VIBRATION SENSOR

EATON Powerware®Vibration Sensor User’s Guide S164201681 Rev 1

6

6. Verify that the ERM is connected to the network. Open the ERM

Web page and select Monitoring, then TH-Module-1 Setup or TH-Module-2

Setup. The setup screen displays (see Figure 6).

7. Change the status of the TH-Module from “Disable” to “Auto” on

the Device Name line. Verify that the TH-Module LED

(Power/Status) is flashing.

8. Select “Vibration” for alarm 1 or alarm 2.

9. Select Set Value to confirm the vibration sensor setup.

Figure 6. Vibration Sensor Settings

10. When the sensor detects vibration, the ERM Web page displays

the alarm. The Web page for the alarm table and sensor events also

records the alarm.

Figure 7. Comprehensive View Screen

Figure 8. Events Log Data

VIBRATION SENSOR

EATON Powerware®Vibration Sensor User’s Guide S164201681 Rev 1 7

Figure 9. Alarm Table

Sensitivity Adjustment

To adjust the sensitivity of the vibration sensor, loosen or tighten the

screw on the vibration sensor as shown in Figure 10. To increase the

sensitivity of the vibration sensor, tighten the screw.

Figure 10. Adjusting the Sensitivity

NOTE For more detailed information that is not included in this manual, first register your

product at warranty.powerware.com, then visit our Web site:

www.powerware.com/rackmonitor. You can also download firmware upgrades, the latest

manuals, and other documentation.

VIBRATION SENSOR

EATON Powerware®Vibration Sensor User’s Guide S164201681 Rev 1

8