Easy Clocking Xenio 700 Manuel

INSTRUCTION GUIDE FOR XENIO 700

Contents

INTRODUCTION 4

WHAT’S IN THE BOX 5

XENIO TIME CLOCK INSTALLATION 6-9

CONFIGURE WIFI SETTINGS (OPTIONAL) 10-11

CONNECT VIA ETHERNET/NETWORK CABLE 12

HOST PC SETTINGS 13-14

EXPORTING TIME LOGS INTO USB 15-16

ADDING EMPLOYEES 17-20

Adding an Employee’s Fingerprint 17-18

Adding a Smart Card to an Employee 19

Adding a Pin Number to an Employee 20

ASSIGNING ADMINISTRATOR/MANAGER LEVEL 21-22

HOW TO PROPERLY CLOCK IN/OUT 23-26

Fingerprint 23

Smart Card 24

Pin Number 25-26

SYSTEM SETTINGS 27-28

This instruction guide covers the

conﬁguration for the following model:

XENIO 700

Manual Version 1.0

©Easy Clocking 2018

What’s in the box

4x 4x 1x

POWER ADAPTER

A) B) C)

WALL MOUNT

XENIO

SCREWS WALL

ANCHORS

WALL MOUNT

SCREW

XENIO

INSTRUCTION

GUIDE

INSTRUCTION GUIDE FOR XENIO X700

Installation

Insert Wall Anchors (B)

into the 4 holes that you

marked in Step 1.

Using a pencil, mark 4

screw holes on the wall.

*When connecting to your network via ethernet:

Run the cables (ethernet cable not provided)

inside or outside of the wall

Align your Wall Mount with the 4 Wall Anchors (B)

and secure the mount to the wall with the 4

Screws (A) provided.

** Network cable is not required when using Wi-Fi

Connect your ethernet cable to an ethernet

wall jack, router, or switch. Insert the Power

Adapter to an electrical receptacle.

Attach the other end of the ethernet cable and

the Power Adapter to the Xenio.

** When connecting power

to the Xenio via POE, DO NOT connect the provided power adapter.

Attach the Xenio to the Wall Mount,

Secure the Xenio to the Wall Mount by

fastening the Wall Mount Screw (C),

Conﬁgure Wiﬁ Settings (optional)

1. Open the Xenio Time Clock Menu

Tap

2. Select Wi-Fi

3. Enable the Wi-Fi option on the Time Clock

To enable Wi-Fi, switch the Wi-Fi option

from OFF to ON located at the top of the screen.

4. Select your Wireless network from the list.

If the network is secured, you will need to input

your security key/password to successfully connect.

If the network is open (no security key/password,)

the device will connect automatically.

Tap

Wi-Fi 1

Wi-Fi 3

Wi-Fi 4

connected

open

secured

Wi-Fi 2

secured

CONNECT

Table des matières

Autres manuels Easy Clocking Horloge

Easy Clocking

Easy Clocking XENIO 5O Manuel

Manuels Horloge populaires d'autres marques

Silicon Laboratories

Silicon Laboratories SI5324 Manuel utilisateur

Heathkit

Heathkit GC-1005 Manuel utilisateur

Oregon Scientific

Oregon Scientific PRYSMA RMR221P Manuel utilisateur

Andrew O'Malley

Andrew O'Malley DOTKLOK Manuel utilisateur

ALGE-Timing

ALGE-Timing ASC3 Manuel utilisateur

Bodet

Bodet Profil 960 Manuel utilisateur

Nixie Clock

Nixie Clock Divergence Meter Manuel utilisateur

La Crosse Technology

La Crosse Technology WS-8256-AL Manuel utilisateur

Mini Gadgets

Mini Gadgets MCPro Manuel utilisateur

Casio

Casio TMR-200 Manuel utilisateur

Progetti

Progetti ILTEMPOSTRINGE Manuel

BVItech

BVItech BV-101 Manuel utilisateur

Progetti

Progetti KALIMERO Manuel

La Crosse Technology

La Crosse Technology WT-3141b Manuel

La Crosse Technology

La Crosse Technology W86531 Manuel utilisateur

Sharp

Sharp SPC900 Manuel utilisateur

La Crosse Technology

La Crosse Technology 404-50447 Manuel utilisateur

Datexx

Datexx DF0063 Manuel utilisateur

Easy Clocking xenio 700 Manuel

Manuels Horloge populaires d'autres marques