EastLink ADC-V622 Manuel utilisateur
Home View Camera Self-Install Guide
1
Everything you need to get started:
• ADC-V622 camera (included)
• AC power adapter (included)
•Internet connection
•A computer, tablet or smartphone with WiFi
•An Ethernet cable for installation (included)
•Login and Password for the alarm.com account to which
you will add the camera
Home View Camera Self-Install Guide
2
How to install:
1. Connect Ethernet Cable from Camera to Modem
2. Connect Power - Wait for LED to be Solid Green - 60 seconds
3. Log in to alarm.com account
4. Select the Video tab
• If 1st camera on account click Add Camera to account
• If cameras already on account select Video Device Settings and select
Add Video Device
5. Click Find Video Devices
6. A new camera should be displayed in the list
• Make sure Camera Status says New Camera
• If Camera Status says Firmware Updating wait until New Camera is
displayed. (LED on camera should be solid green)
7. Click Continue
8. Enter desired name for the camera and click Continue
9. Camerawillnowenterconguration
10. Option will be given to set Camera up Wireless or Remain Connected via Ethernet
(Select Desired Option)
11. If Wireless option selected, then select from 3 options:
• Scan for Wireless Networks (Select network, security type, key format,
enter password)
• If you have another camera, select Copy from another Camera (Copies the network
settings form an existing camera)
•ManuallyCongureWirelessNetwork(Manuallyenterallnetworksettings)
12. When completed the camera can be tested. To test, do the following:
• Disconnect Power and Ethernet Cable
• Reconnect Power and wait for LED to turn Solid Green and test
13. Camera can now be mounted at desired location
If you require assistance with any step of your installation please
contact us at 1-866-476-0420.
Home View Camera Self-Install Guide
3
Solid Green
Flashing Green & Red
Factory reset
LED colour
LED colour
Flashing Green
Solid Red
Flashing Red
Internet connection
Factory reset
Status
Status
Local network
connection
No network
connection
System booting
Local network and internet connection
1. Press the Menu button
2. Use the Volume buttons to scroll to the
Factory Reset option.
3. Follow the audio prompts to initiate a Factory Reset.
The camera will reboot with factory defaults.
Description
Description
Local network connection only, no internet
No local network or internet connection
Camera is booting
Autres manuels EastLink Caméra IP
