RW010
Issue 01
PLEASE BE ADVISED: Before assembling the Roof-Walk for the first time, it is highly recommended
that Installers familiarise themselves with the component parts and carry out a test assembly and
disassembly in a safe area away from the point of final installation. All component parts detailed in the
operating instructions must be used in the assembly of the system. Should a piece be missing or
appear defective do not continue to assemble and contact Easi-Dec Immediately.
Step1 Step 2
Lay out the components ready for assembly.
Attach the first support Batten to the Board-Walk section using the
captivated pins in the hole in the stiles.
Step 3 Step 4
Repeat STEP 2 for the second Batten. Step 1 & 2 should be
repeated for each additional Board-Walk.
Tie the supplied strap to the top rung of the Board-Walk.
Step 5 Step 6
With the strap tied on securely lower the Board-Walk panel onto
the roof. You would repeat these steps for additional Board-Walk
panels. This picture is for demonstration purposes only.
Connecting Additional Board-Walk together, follow STEP 4 & 5 in
these instructions for laying the board walk into position.
