Charging the Battery
5
1
Getting to Know Your Phone
To charge the battery, do as follows:
1Insert the plug of the charger into the connector
of the phone as shown in the preceding figure.
Before inserting the plug, ensure that the arrow
on the charger output jack points to the front side
of the phone.
2Plug in the connector of the charger to a power
socket.
3When the battery is being charged, the charging
indicator blinks continuously.When the charging
indicator stops blinking, it indicates that the bat-
tery is full.
4After being charged, unplug the power adapter
from the power socket, unplug the charger from
the mobile phone, and then close the protection
cover.
Note
• During charging with power is off and the flip
closed, a cylider icon indicating the power
level of the battery will appear on the screen
and will blink, continuously. When the cylinder
is filled and stops blinking, it indicates that the
charging is completed.
• When charging the mobile phone with it
closed and is powered on, the battery icon is
blinking on the upper right corner of the exter-
nal display. After a while, the external display
is automatically off. You can check the charg-
ing status by softly touching a side key. When
the battery icon stops blinking, the charging is
complete.
U550.book Page 5 Monday, March 10, 2008 8:51 PM
