E-FLITE 25-Size Float Set Manuel utilisateur
25-Size Float Set
Assembly Manual
Introduction
Thank you for purchasing the E-flite™Fiberglass Floats.
They have been designed for optimum performance
when used with our J-3 Cub (EFL4000), Ultra Stick 25e
(EFL4025), and other upcoming 25-size ARF planes.
The floats have been constructed from high quality
fiberglass, have been painted with fuel-proof paint for
glow applications, and have the struts pre-welded for ease
of installation. The floats are ready to use out of the box
with only minor assembly required by the builder.
We hope you enjoy your float experience as much as
we have.
Tools Required
Phillips screwdriver
File or rotary tool
Hobby knife
Pliers
Drill
Drill bit: 5/64" (2mm)
Hex wrench: 1.5mm, 3/32"
Table of Contents
Introduction................................................................2
Tools Required............................................................2
Adhesives Required.....................................................3
Using the Manual .......................................................3
Replacement Parts.......................................................3
Limited Warranty Period ..............................................4
Limited Warranty & Limits of Liability.............................4
Safety Precautions.......................................................5
Questions, Assistance, and Repairs...............................5
Questions or Assistance...............................................5
Inspection or Repairs...................................................5
Warranty Inspection and Repairs..................................6
Non-Warranty Repairs.................................................6
Float Installation (J-3 Cub)............................................7
Linkage Installation....................................................11
Float Installation (Ultra Stick 25E) ...............................17
Linkage Installation....................................................20
Float Flying ..............................................................26
2006 Official AMA
National Model Aircraft Safety Code................28
Notes ......................................................................30
2
Replacement Parts
EFLA501 Wire Struts
EFLA502 Float A
ELFA503 Water Rudder
EFLA504 Hardware Package
EFLA505 Float B
Note: Both floats are identical in construction.
When reordering parts, Float B (EFLA505) has
the holes drilled on the stern for the rudder
assembly mount bracket. Float B (EFLA502)
does not have the holes pre-drilled.
Adhesives Required
HAN8000 6-Minute Epoxy
Threadlock
Using the Manual
This manual is divided into sections to help make
assembly easier to understand, and to provide breaks
between each major section. In addition, check boxes
have been placed next to each step to keep track of each
step completed. Steps with a single circle () are performed
once, while steps with two circles () indicate that the
step will require repeating, such as for a right or left wing
panel, two servos, etc.
Remember to take your time and follow the directions.
3
Limited Warranty Period
Horizon Hobby, Inc. guarantees this product to be free
from defects in both material and workmanship at the
date of purchase.
Limited Warranty & Limits of Liability
Pursuant to this Limited Warranty, Horizon Hobby, Inc. will,
at its option, (i) repair or (ii) replace, any product determined
by Horizon Hobby, Inc. to be defective. In the event of a
defect, these are your exclusive remedies.
This warranty does not cover cosmetic damage or damage
due to acts of God, accident, misuse, abuse, negligence,
commercial use, or modification of or to any part of the
product. This warranty does not cover damage due to
improper installation, operation, maintenance, or attempted
repair by anyone other than an authorized Horizon Hobby,
Inc. service center. This warranty is limited to the original
purchaser and is not transferable. In no case shall Horizon
Hobby’s liability exceed the original cost of the purchased
product and will not cover consequential, incidental or
collateral damage. Horizon Hobby, Inc. reserves the right to
inspect any and all equipment involved in a warranty claim.
Repair or replacement decisions are at the sole discretion
of Horizon Hobby, Inc. Further, Horizon Hobby reserves the
right to change or modify this warranty without notice.
REPAIR OR REPLACEMENT AS PROVIDED UNDER
THIS WARRANTY IS THE EXCLUSIVE REMEDY OF
THE CONSUMER. HORIZON HOBBY, INC. SHALL
NOT BE LIABLE FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES.
As Horizon Hobby, Inc. has no control over use, setup,
final assembly, modification or misuse, no liability shall be
assumed nor accepted for any resulting damage or injury.
By the act of use, setup or assembly, the user accepts all
resulting liability.
If you as the purchaser or user are not prepared to accept
the liability associated with the use of this product, you
are advised to return this product immediately in new and
unused condition to the place of purchase.
4
Safety Precautions
This is a sophisticated hobby product and not a toy. It
must be operated with caution and common sense and
requires some basic mechanical ability. Failure to operate
this product in a safe and responsible manner could result
in injury or damage to the product or other property. This
product is not intended for use by children without direct
adult supervision.
The product manual contains instructions for safety,
operation and maintenance. It is essential to read and
follow all the instructions and warnings in the manual,
prior to assembly, setup or use, in order to operate
correctly and avoid damage or injury.
Questions,Assistance, and Repairs
Your local hobby store and/or place of purchase cannot
provide warranty support or repair. Once assembly, setup
or use of the product has been started, you must contact
Horizon Hobby, Inc. directly. This will enable Horizon to
better answer your questions and service you in the event
that you may need any assistance.
Questions or Assistance
For questions or assistance, please direct your email to
productsupport@horizonhobby.com, or call 877.504.0233
toll free to speak to a service technician.
Inspection or Repairs
If your product needs to be inspected or repaired, please
call for a Return Merchandise Authorization (RMA). Pack
the product securely using a shipping carton. Please note
that original boxes may be included, but are not designed to
withstand the rigors of shipping without additional protection.
Ship via a carrier that provides tracking and insurance
for lost or damaged parcels, as Horizon Hobby, Inc. is not
responsible for merchandise until it arrives and is accepted
at our facility. Include your complete name, address, phone
number where you can be reached during business days,
RMA number, and a brief summary of the problem. Be sure
your name, address, and RMA number are clearly written on
the shipping carton.
5
6
Non-Warranty Repairs
Should your repair not be covered by warranty and the
expense exceeds 50% of the retail purchase cost, you will
be provided with an estimate advising you of your options.
You will be billed for any return freight for non-warranty
repairs. Please advise us of your preferred method of
payment. Horizon Hobby accepts money orders and cashiers
checks, as well as Visa, MasterCard, American Express,
and Discover cards. If you choose to pay by credit card,
please include your credit card number and expiration date.
Any repair left unpaid or unclaimed after 90 days will be
considered abandoned and will be disposed of accordingly.
Electronics and engines requiring inspection or
repair should be shipped to the following address
(freight prepaid):
Horizon Service Center
4105 Fieldstone Road
Champaign, Illinois 61822
All other products requiring inspection or repair should
be shipped to the following address (freight prepaid):
Horizon Product Support
4105 Fieldstone Road
Champaign, Illinois 61822
Warranty Inspection and Repairs
To receive warranty service, you must include your original
sales receipt verifying the proof-of-purchase date. Providing
warranty conditions have been met, your product will be
repaired or replaced free of charge. Repair or replacement
decisions are at the sole discretion of Horizon Hobby.
7
Float Installation (J-3 Cub)
Required Parts
• Fuselage • Landing gear
• Ventral fin mount • Ventral fin
• 3mm setscrew (4) • Hex wrench: 1.5mm
• Nylon bracket (4)
• 5/32" wheel collar (4)
• 3mm x 12mm sheet metal screw (16)
• 2mm x 12mm sheet metal screw (3)
• Nylon strap (2)
Required Tools and Adhesives
• Phillips screwdriver • File or rotary tool
• Threadlock • Hobby knife
• 6-minute epoxy
1. Remove the packing material from the landing
gear. Attach it to the fuselage using the two
nylon straps that were used to hold on the main
gear and the two nylon straps included with the
float kit. Use 2mm x 12mm screws to install the
nylon straps.
8
2. Attach two of the brackets to each float using
eight 3mm x 12mm sheet metal screws. Each
float uses two brackets, so you’ll install four
brackets in all.
3. Use a file or rotary tool to make a flat on the top
of each of the landing gear extensions.
9
4. Attach the floats using the four 5/32" wheel
collars and four 3mm setscrews. Make sure to use
threadlock when tightening the setscrews onto the
flats made in the previous step.
Note: One float has holes drilled in the aft end
for the rudder bracket. This float is mounted on
the same side as the rudder linkage.
10
6. Remove the bottom 1/8" (3mm) of covering from
the ventral fin using a hobby knife.
5. Attach the ventral fin mount using three 2mm x
12mm sheet metal screws.
Table des matières
Autres manuels E-FLITE Jouet
E-FLITE
E-FLITE Clipped Wing Cub 250 Manuel utilisateur
E-FLITE
E-FLITE Beechcraft Bonanza 15e ARF Manuel utilisateur
E-FLITE
E-FLITE RV-9 450 Manuel utilisateur
E-FLITE
E-FLITE Extra 260 3D Profile Manuel utilisateur
E-FLITE
E-FLITE CARBON-Z YAK 54 Manuel utilisateur
E-FLITE
E-FLITE Mini FuntanaX Manuel utilisateur
E-FLITE
E-FLITE Pulse XT 25e ARF Manuel utilisateur
E-FLITE
E-FLITE F-16 ARF Manuel utilisateur
E-FLITE
E-FLITE Habu 32 EDF ARF Manuel utilisateur
E-FLITE
E-FLITE ALBATROS D.Va 25e Manuel utilisateur
E-FLITE
E-FLITE YAK-54F Manuel utilisateur
E-FLITE
E-FLITE UMX ASK-21 Manuel utilisateur
E-FLITE
E-FLITE Aeronca Champ 15E ARF Manuel utilisateur
E-FLITE
E-FLITE T-34 Mentor 25e ARF Manuel utilisateur
E-FLITE
E-FLITE Blade 400 3D Manuel utilisateur
E-FLITE
E-FLITE AT-6 25e Texan ARF Manuel utilisateur
E-FLITE
E-FLITE P-51B Mustang 32e ARF Manuel utilisateur
E-FLITE
E-FLITE SLICK 3D 480 Manuel utilisateur
E-FLITE
E-FLITE LR-1A Pogo 15e Manuel utilisateur
E-FLITE
E-FLITE Pawnee Brave Night Flyer EFL6950 Manuel utilisateur
