Dynamo DPHPW 4000-HD Manuel utilisateur

HONDA POWERED
HOT PRESSURE WASHER
DPHPW 4000-HD
INSTRUCTION MANUAL

1
Congratulations Owner
Congratulations on your purchase of this high quality Hot Water Pressure Washer. This
machine is designed to give you many years of service, however, reasonable care and routine
maintenance is mandatory. Proper operator’s use is required.
As you proceed through the owner’s manual it is imperative that you follow and adhere to the
following safety messages.

2
Contents
1. Important safety instructions
1.1 Operator safety instruction
2. Description
2.1 Purpose
2.2 Operating elements
3. Before starting your LPG hot water pressure washer
3.1 Installation requirement
3.2 Setting up your cleaner
3.3 Assembling your pressure washer
3.4 Before starting up the engine
3.5 Set up procedures
4. Installation / Operation
4.1 Starting the engine and the machine
4.2 Warning during operation
4.3 Independent use of hot water and pressure washer
5. Applications and methods
5.1 Techniques
5.2 Operations DON’T
6. Preventive maintenance
6.1 Routine Inspection
6.2 Operators winterizing procedure
7. After using your pressure washer
7.1 Switching off the LPG hot water machine
8. Troubleshooting
Important Safety Instructions
For your own safety
This appliance must,
•Only be used by persons who have been instructed in its correct usage and is explicitly
commissioned with the task of operating it
•Only be operated under supervision
•NOT be used by children

3
Your safety and the safety of others are very important. We have provided important safety
messages in this manual and on the machine. PLEASE READ THESE MESSAGES
CAREFULLY.
SAFETY INSTRUCTIONS
A safety message alerts you to potential hazards that could hurt you or others. Each safety
message is preceded by a safety alert symbol! And one of these three words: DANGER,
WARNING, or CAUTION.
These words mean:
DANGER! You may be SERIOUSLY HURT or KILLED if you don’t follow instructions.
Warning! You COULD be SERIOUSLY HURT or KILLED if you don’t follow instructions.
CAUTION! You CAN be HURT if you don’t follow instructions.
You will see other important messages that are preceded by the word NOTICE.
Damage Prevention Messages
This word means:
NOTICE your machine or other property could be damaged if you don’t follow instructions.
The purpose of these messages is ensure your safety and to help prevent damage to your
machine, other property or the environment.
1.1 Operator safety instructions
Do not attempt to install or operate this machine until you have read this manual completely. If
you or your operator can not read English have this manual explained fully before attempting to
operate this equipment.
DANGER!
This machine is designed to produce very high pressure and temperature at the gun tip. To
prevent injury or damage, hold cleaning gun securely at all times when pump is in operation and
fluid is being sprayed.
WARNING!
Check cleaning equipment, remote hose, gun, wand and fittings prior to operation. Do not
operate this machine with a damaged worn hose, electrical device or connections.
CAUTION!

4
•For your safety, if you smell gas:
WARNING!
•Open windows to ensure ventilation if this product is used indoor.
•Do not touch or spray electrical switches.
•Turn off breaker switch supplying power to unit. Close gas supply valve to unit.
•Extinguish any open flame.
•Immediately evacuate premises and call your gas supplier and fire department
immediately.
DANGER!
Do not operate the unit when there is an odor of gas present. If you operate the unit when there
is an odor of gas, it could result in injury to you or other personnel.
Tampering with the machine’s factory preset unloaded valve settings and/or the pressure relief
valve setting could result in a machine explosion. Do not attempt to change the settings.
Discontinue use if a malfunction occurs and contact your local authorized distributor.
Do not operate unit with a malfunctioning burner or burner controls. Inspect burner and burner
control operation before each use. Failure to do so may result in an explosion. If you suspect a
problem with the burner, discontinue use immediately and contact your local authorized
distributor.
Machines can cause an explosion when operated near flammable materials and vapors. Do not
use this machine with or near fuels, grain dust, solvents, thinners, or other flammable materials.
This unit must be installed in compliance with all applicable gas codes. Failure to do so could
result in injury to you or other personnel.
Do not point the gun at people or animals! Results could be fatal!
Do not refuel either fuel while machine is running; allow the machines to cool off before fuel is
refilled.
2. Description
2.1 Purpose
This durable LPG hot water high pressure Cleaner has been designed for professional use in:
•Agriculture
•Industry
•Transport industry
•Automotive cleaning
•Municipal facilities
•Cleaning trade
•Construction industry

5
•Food industry
•Etc.
Always use the cleaner as described in this operating instruction manual. Any other use may
damage the cleaner or the surface to be cleaned or may result is severe injury of persons.
2.2 Operating elements
Spray gun and lance
Pressure hose
LPG heater
Temperature adjustment
Pressure adjustment
Chemical injection
Triplex plunger pump
Handle
Water inlet
Foot plate for LPG tank

6
Nozzle storage
Instruction and warnings
Gasoline engine
3. Before starting your LPG Hot Water Pressure Washer
3.1 Installation requirements
GENERAL INFORMATION insures that all codes are followed in the installation of your hot
water pressure washer. Installation is easy but good plumbing must be followed. If uncertain, a
qualified electrician and plumber should be consulted.
LOCATION
Place the Pressure Washer in a clean, well ventilated, dry location; allowing access for normal
maintenance. Do not install washer where overspray will be directed toward or around the unit.
Do not install unit in an area where combustible materials are used or stored.
FREEZE PREVENTION
The pump, plumbing and wash hose may burst by freezing water within them. To avoid costly
repair:
Install and store washer in a heated area where temperature exceeds 32 degrees °F. (≥0°C)
Install all lines leading to the washer that are exposed to freezing temperatures.
During extended shutdown periods, thoroughly drain the water system, chemical system and
wash hose. Fill with anti-freeze solution.
If your pressure washer is storage in cold surroundings during winter you must release the
freezing prevention screw on the LPG heater shown on below photo.

7
WATER SUPPLY- Test the water source to determine water hardness. If the hardness exceeds
seven (7) grains, a suitable water softener should be installed. Installing a water softener greatly
improves chemical action and prevents “spotting” on glass, chrome and other washed surfaces.
If local water pressure exceeds 60 PSI, a water pressure reducing valve must be installed.
If the water source is not adequate (capable of supplying a minimum of 3GPM or more than the
volume of the pump at a pressure of a minimum 20 PSI) a tank or other suitable water source
must be provided. (Running a pump without sufficient volume will damage the seals and or
shorten pump life dramatically).
CARE OF High Pressure hose
Following these suggestions will increase the life of your high pressure hose:
1. Do not drag hose over sharp objects that could damage its cover.
2. Do not allow hose to become a “trip hazard”.
3. Do not tug the hose if it is caught around tires. Dislodge without pulling stretching or
jerking the hose.
4. Do not drag hose “down the line” behind mobile wash units.
5. Do not leave hose out in freezing weather. If accidentally frozen, allow to thaw, remove
tip and flush before using.
6. Do not allow the hose to be run over. The wire braid will flatten causing a weak spot in
the hose leading to hose failure, and the hose will have to be replaced.
3.2 Setting up your cleaner
Every fuel burning appliance, including this pressure washer, depends on a proper mix of fuel
and air (by weight) for proper combustion. Therefore some adjustment of the air regulation to
the LPG burner may be necessary to take account of altitude and the resulting air pressure.
This is true whether your fuel is LPG, diesel or gasoline. Your Multi-Power hot pressure washer
was thoroughly tested and adjusted for optimum performance before it left our factory. The
factory is located approximately 200ft above sea level, and combustion settings are optional for
that elevation and below.
1. Before using the cleaner for the first time, check carefully to detect any fault or damage.

8
2. Run this machine only when it is in perfect condition.
3. Set the brake before use of the machine.
3.3 Assembling your new pressure washer
Accessories included and needed for assembly of your new hot water pressure washer

9
Assembly of handle
Mount nuts on screws and tighten all carefully.
Assembly of the wheels and axles
Place U bolt at wheel Axle. Screw wheel axle on the frame.
Place disk and Pin on axle, bend the pin to secure disk and tires, mount nut and tighten it
carefully.
Assembly of the hook for the gun and high pressure hose for storage
Table des matières

















