Dynamix DW-Phone S Manuel utilisateur
D
Dy
yn
na
am
mi
ix
x
D
DW
W-
-P
Ph
ho
on
ne
e/
/S
S
U
Us
se
er
r
M
Ma
an
nu
ua
al
l
Chapter 1 Overview of the Dynamix DW-Phone/S 3
1. Hardware Overview .................................................................................................... 4
1.Front View and Keypad function ............................................................................ 4
2.Back View .............................................................................................................. 7
3.Specification of connector ...................................................................................... 7
2. Software Features and Specification .......................................................................... 9
Chapter 2 Configuring the SIP-Phone through LCD Phone menus 11
1. Initialize SIP-Phone ................................................................................................. 11
2. LCD Menu Configuration .......................................................................................... 13
Chapter 3 Configuring the SIP-Phone through Web Pages 18
Step 1. Browse the IP Address predefined via Keypad................................................. 19
Step 2. Input the login name and password.................................................................. 20
Step 3. Enter the web interface main screen ................................................................ 21
Step 4. Start to configure .............................................................................................. 21
1. Network Interface ................................................................................................ 22
2. SIP Information ................................................................................................... 25
3. System Configuration.......................................................................................... 27
4. PPPoE Configure ................................................................................................ 28
5. Voice Setting ....................................................................................................... 29
6. Phone Book ........................................................................................................ 30
7. DSCP Configure.................................................................................................. 31
8. Password ............................................................................................................ 33
9. Rom Configuration .............................................................................................. 34
10. Flash Clean....................................................................................................... 35
11. Commit Data ..................................................................................................... 36
12. Reboot System.................................................................................................. 37
Chapter 4 Configuring the SIP-Phone through Telnet command lines 38
1. [help] command........................................................................................................ 38
2. [quit] command......................................................................................................... 39
3. [debug] command..................................................................................................... 39
4. [reboot] command..................................................................................................... 39
5. [flash] command ....................................................................................................... 39
6. [commit] command ................................................................................................... 40
7. [ifaddr] command...................................................................................................... 40
8. [time] command........................................................................................................ 41
9. [ping] command........................................................................................................ 41
10. [pbook] command................................................................................................... 42
11. [pppoe] command ................................................................................................... 43
12. [sysconf] command................................................................................................. 44
1
13. [sip] command ........................................................................................................ 44
14. [security] command ................................................................................................ 45
15. [voice] command .................................................................................................... 46
16. [tos] command........................................................................................................ 47
17. [rom] command....................................................................................................... 48
20. [passwd] command................................................................................................. 49
Chapter 5 Upgrading Software on the SIP-Phone 51
1.From LCD Phone Menu............................................................................................. 51
2. Web Management .................................................................................................... 52
3. Remote Control: Telnet............................................................................................. 53
2
Chapter 1 Overview of the Dynamix DW-Phone/S
Dynamix DW-Phone/S is a full-featured IP-based telephone set via Ethernet base
communication. Over the office LAN connection, it provides IP-PBX solution such as
station-to-station call, IP call and local PSTN/PBX Extension call via PSTN Gateway.
Dynamix DW-Phone/S provides two 10/100BaseT switch/hub RJ-45 ports allow connecting
to office LAN and PC simultaneously. It is compatible with ADSL or Cable Modem provided
by ITSP, ISP or Carrier Company to provide VoIP services to residential and SOHO
application. SIP-Phone is also an integrated Analog Phone provides IP call or PSTN call
selection. When external power is down, it can be a Plain Old Telephone set (POTs).
It provides internal high-quality speakerphone, programmable keys and feature buttons.
Dynamix DW-Phone/S also embedded with a dot matrix of two lines 24 characters LCD,
which can display date and time, calling party name, calling party number, and digits dialed
and etc.
3
Note:
(**): May be not available right now, please contact with your distributor.
1. Hardware Overview
1.Front View and Keypad function
LCD: 2 lines, 24 character Dot Matrix display.♦
♦
♦
♦
♦
♦
C: Jump out current LCD menu.
: Move to previous selection or clear previous data.
: Move to right or next selection.
OK: Press OK to confirm the modification.
Direct Line (DL) Button 1 – 10: User press DL button after off-hook to do speed dial
4
♦
according to phone book data from 1-10 (please refer to LCD configuration-3.Phone
Book; Advanced Configurations via Telnet- 10.[pbook] command, or Web
Configuration-Phone Book chapter.
Number 1 –10, * and #: The function is as the same as the general phone set.
Corresponding list of keypad and symbol:
1 “1”
2 “A” ; “ B” ; “C” ; “2”
3 “D” ; “E” ; “F” ; “3”
4 “G” ; “H” ; “I” ; “4”
5 “J” ; “K” ; “L” ; “5”
6 “M” ; “N” ; “O” ; “6”
7 “P” ; “Q” ; “R” ; “S” ; “7”
8 “T” ; “U” ; “V” ; “8”
9 “W” ; “X” ; “Y” ; “Z” ; “9”
* “.” ; “@” ; “_” ; ”-“ ; “,” ; “!” ; “?” ; “*”
0 “0” ; “Space”
# “#”
MUTE: Mute the voice of MIC and let others can’t hear from user in communication.♦
♦ PSTN: Press PSTN to switch SIP-Phone as PSTN or IP Phone Mode. In PSTN mode,
“PSTN” characters will be displayed on LCD left bottom side, then users can dial out as
if standard telephone set in PSTN; in IP Phone mode, “PROXY ” characters will be
displayed on LCD left bottom side. (**)
Note:
1. When SIP-Phone is in PSTN mode, only PSTN and SPEAKER function key can work.
2. On LCD will display ”…Incoming Call... ” to inform user when SIP-Phone has both IP and
PSTN side incoming calls.
3. If in communication with IP side, user can press HOLD to hold IP side, then press PSTN
to pick up PSTN side, after that can press HOLD again to retrieve IP side.
4. If in communication with PSTN side, user must hang up PSTN side before pick up IP side.
HOLD: To hold a call, after press HOLD button, both sides will hear hold tone.♦
♦
♦
SPEED: Press SPEED and number (Phone book index) after off-hook can do speed dial
according to phone book data (please refer to 3.LCD configuration-6. Phone Book or
Advanced Configurations via 4.Telnet- 10.[pbook] command).
FORWARD: Forward an incoming call to another IP device. (Please refer to LCD
configuration-Forward Type) (**)
5
♦
♦
MESSAGE and its indicated LED light: When having missed incoming calls, the
MESSAGE LED will be flashing. User can check the information of missed calls by
pressing the MESSAGE button. (**)
TRANSFER:
1. Transfer a call to the third site. When A and B are in communication, A wants to
transfer this call to C, A can press TRANSFER button, now B will hear hold tone, and
A will hear dial tone, then A can press phone number of C, after C picks up, A can talk
with C, after A hangs up, B and C can be connected.
Note:
1. A cannot press phone number of C before hearing dial tone.
2. A cannot hangs up before C picks up.
2. Change characters to be capital or lowercase: when pressing TRANSFER before
press letters can switch input type of letters.
REDIAL: Redial the last outgoing call.♦
♦
♦
+ And -: Adjust the voice volume heard of communication.
SPEAKER: Hand free mode. User can talk without picking up handset.
Note:
All function keys mentioned above (except dialing keypad) are effective only in IP
Phone mode. (**)
6
2.Back View
DC 9V: DC 9V power input outlet♦
♦
♦
♦
LAN: RJ-45 connector, connected directly to the Hub through the straight CAT-5 cable.
PC: RJ-45 connector, connected directly to the PC through the straight CAT-5 cable
Line: RJ-11 connector, connected directly to the PSTN analog line.
Note:
There are two LED indicated lights: LINK/ACT and 10/100 for LAN port and PC port.
When network status is regular, LED of LINK/ACT will light on; when SIP-Phone is
transmitting or receiving data, LED will be flashing; when transmit rate is in 10 mbps or
100mbps, LED of 10/100 will light off or light on.
3.Specification of connector
1 Ethernet Port
Ethernet port is for connecting SIP-Phone to network, transmit rate supports 10/100
Base-T.
Ethernet connector LAN
2 RJ11connector
RJ11 connector is for connecting SIP-Phone with PSTN.
7
RJ11connector
8
2. Software Features and Specification
Application:
ISP/ITSP (Internet Telephony Service Provider)
IP-PBX with office telephony services
Multi-nation enterprise communication
SOHO Telephony
Calling Features
Call Hold
Call Transfer
Call Forward (**)
10 sets last number Redial
Ten configurable speed dials
Network Supported
Fixed IP
Dynamic Host Configuration Protocol (DHCP)
PPPoE connection (When PPPoE disconnect, SIP-Phone can automatically
re-connect)
Behind NAT IP Sharing Device
Support QOS by setting DSCP (Differentiated Service Code Point) parameters of VoIP
packet
Support 802.1p1q (VLAN) (**)
Audio Features
G.711 a/µ-Law, G.723.1, G.729, G.729a
VAD, CNG
G.165/G.168 compliant echo cancellation
Programmable Dynamic Jitter Buffer
Bad Frame Interpolation
Gain/Attenuation Settings
9
Table des matières
Autres manuels Dynamix Téléphone
