Dynamic CT10 Manuel utilisateur
CT10 Barcode Scanner
User Manual
2
IMPORTANT NOTICE
Safety Precaution
* DO NOT disassemble the scanner, or place foreign matter into the scanner cause a
short circuit or circuit damage.
* DO NOT expose the scanner or battery to any flammable sources.
Maintenances Precaution
* Use a clean cloth to wipe dust off the body of the scanner.
* If you find the scanner abnormal, write down the specific scenario and consult the
maintenance person.
3
Contents
IMPORTANT NOTICE...................................................................................................................2
Safety Precaution ......................................................................................................................2
Maintenances Precaution ..........................................................................................................2
Contents ............................................................................................................................................3
Overview of CT10 Barcode Scanner...........................................................................................5
Features of the Scanner.............................................................................................................5
Appearance ...............................................................................................................................5
Introduction of Key Function....................................................................................................6
Specifications............................................................................................................................6
Correct Aiming..........................................................................................................................7
Incorrect Aiming.......................................................................................................................7
QUICK START................................................................................................................................8
Enter the Setting Mode .............................................................................................................9
Exit the Setting Mode with Save...............................................................................................9
Exit the Setting Mode without Save........................................................................................10
Restore Factory Defaults.........................................................................................................10
Check Software Version..........................................................................................................10
Save Custom Settings..............................................................................................................11
Chapter 1 Features and Basic Setups......................................................................................12
1.1 Battery...............................................................................................................................13
1.1.1 Mounting the battery (charging) ............................................................................13
1.1.2 How to operate CT10 Barcode Scanner.................................................................13
1.1.3 Auto Power Off......................................................................................................14
1.2 Transmit Buffer.................................................................................................................15
1.2.1 Inventory Mode......................................................................................................16
1.3 LED Indicator ...................................................................................................................17
1.4 Beeper...............................................................................................................................18
1.4.1 Beeper Volume.......................................................................................................19
1.5 Scan Modes.......................................................................................................................20
1.5.1 Manual Mode.........................................................................................................20
1.5.2 Continuous Mode...................................................................................................21
1.5.3 Auto Power Off Mode............................................................................................22
1.5.4 Auto-induction Mode.............................................................................................24
1.6 Symbologies Supported ....................................................................................................25
1.7 USB Wired Data Transmission .........................................................................................25
Chapter 2 How to Connect with BT................................................................................................26
2.1. Select Output Interface.....................................................................................................27
2.1.1 BT SPP Mode.........................................................................................................27
2.1.2 BT HID Mode ........................................................................................................27
2.2 Setting up a BT connection...............................................................................................28
4
2.3 Connect to PC via BT .......................................................................................................29
2.4 Connect to PDA via BT ....................................................................................................35
2.4.1 One-click Android Connection...............................................................................39
2.4.2 One-click iOS Connection .....................................................................................42
2.4.3 Connect via BT Input Method................................................................................45
Chapter 3 SYMBOLOGY SETTINGS..........................................................................................54
3.1 CODABAR.......................................................................................................................55
3.2 CODE 25 –INDUSTRIAL25............................................................................................56
3.3 CODE 25 –INTERLEAVED 25........................................................................................57
3.4 CODE 25 –MATRIX 25....................................................................................................58
3.5 CODE 25-STANDARD 25...............................................................................................59
3.6 CODE 39...........................................................................................................................60
3.6.1 Enable/Disable Code 39.........................................................................................60
3.6.2 START/STOP Transmission...................................................................................60
3.6.3 Checksum Verification........................................................................................61
3.6.4 STANDARD/FULLASCII CODE 39..................................................................62
3.7 CODE 93...........................................................................................................................62
3.7 CODE 93...........................................................................................................................63
3.8 Code 128...........................................................................................................................64
3.9 EAN-8...............................................................................................................................65
3.9.1 Enable/Disable EAN-8...........................................................................................65
3.9.2 Convert to EAN-13................................................................................................65
3.9.3 Checksum Transmission.........................................................................................66
3.10 EAN-13...........................................................................................................................67
3.10.1 Enable/Disable EAN-13.......................................................................................67
3.10.2 Convert to ISBN...................................................................................................67
3.10.3 Checksum Transmission.......................................................................................68
3.11 UPC-A.............................................................................................................................69
3.11.1 UPC-AOutput ‘0’ ................................................................................................69
3.11.2 UPC-AChecksum Transmission..........................................................................69
3.12 UPC-E.............................................................................................................................70
3.12.1 Enable/Disable UPC-E.........................................................................................70
3.12.2 UPC-E Checksum Transmission..........................................................................70
3.13 MSI .................................................................................................................................71
3.14 CODE 11.........................................................................................................................72
Chapter 4 DEFINING OUTPUT FORMAT..................................................................................73
4.1 CODE ID ..........................................................................................................................74
4.2 Suffix Code of Barcode Settings.......................................................................................75
APPENDIX I..................................................................................................................................76
5
Overview of CT10 Barcode Scanner
Features of the Scanner
* Small size, portable.
* Supports three scan modes, including Continuous Mode, Manual Mode, Auto-off Mode.
* Supports most popular barcode symbologies.
* User feedback via LED indicator and beeper
* The voice volume of scan barcode successfully could change via setting barcode.
* Built-in 128 KB Flash memory can store up to thousand scan barcodes.
* Provides 2 KB memory for reserve buffer while Bluetooth connection interrupt, can store
up to 110 scan barcodes.
* Supports BT SPP.
* Supports BT HID.
* Programmable parameters include data output format, editing format, symbologies, etc.
★Abundant decoding symbologies
★Whole body shockproof and drop resistance design
★Proprietary intellectual property rights
★Comfortable operating feel
★Button life up to 3 million times
★Support BT standard protocol, no need adaptor
★1000mAh large capacity lithium battery
★Long working hours
Appearance
6
Introduction of Key Function
Note: Long press Scan button 3 seconds will turn on the CT10 scanner.
Long press Scan button 3 seconds will turn off the CT10 scanner.
Flip the Scan button can read the barcodes.
Specifications
PHYSICAL CHARACTERISTICS
Material ABS+TPU
Size Length 167mm*Width 70mm* Height 85.5mm
Color White, Black
Power supply Built-in rechargeable lithium battery
Weight 150g（With battery）
PERFORMANCE CHARACTRISTICS
Bluetooth Bluetooth class 2.0
Interfaces Supported Multiple Interface with: USB, RS232, PS2 Keyboard
Interfaces Supported SPP, HID
Light Source (Laser) Laser LED 650+/-20nm
Sensor 2500 pixels
Decode Capability Codabar, Code 11, Code 93, MSI, Code 128, UCC/EAN-128, Code
39, EAN-8, EAN-13, UPC-A, ISBN, Industrial 25, Interleaved 25,
7
Standard 25, 2/5 Matrix
Resolution 5mil
Nominal Working Distance 6~30cm
Decode Rate 200 decodes per second
Scan width 30mm=Scanner Window
Decode mode Single-Line Aiming
Scan mode Auto off mode / Manual mode
Print Contrast Minimum 30%
Scan angles Roll 30°Pitch 75°Yaw65°
Cylinder Horizontal Scan Diameter 35mm
Indication Beeper, LED
Radio Range 10m Visual range
POWER
Voltage DC 5V
Laser Safety Accord with national level two laser safety standards
EMC CE & FCC DOC Compliance
standby Current 35mA
Operating current 60mA
USER ENVIRONMENT
Operating Temp. 0 to 50.°C / 32 to 122°F
Storage Temp. 0 to 50.°C / 32 to 122°F
Operating Humidity 20-85% ( non-condensing )
Storage Humidity 20-85% ( non-condensing )
Drop Specifications Free fall of 1.5m air drop
Accessories Lithium battery, Charger., Data lines
Correct Aiming
Incorrect Aiming
8
QUICK START
The setting of the CT10 Barcode Scanner can be changed by reading the setup barcodes
contained in this manual. This section describes the procedure of setting the CT10
Barcode Scanner by reading the setup barcodes and provides some example for
demonstration.
Steps Action Feedback if Successful
1 Turn on CT10 Barcode Scanner... It will response with a long beep（high
tone）, it's LED shows red and with
Intmt twinkle.
Note: How the CT10 Barcode Scanner establishes a connection with computer or other
compatible device, please refer to Chapter 2.
2 Enter the Setting Mode... The CT10 Barcode Scanner will
response three beeps (tone descending
from high to low), and its LED indicator
will flashing purple.
3 Read a Setup barcode The CT10 Barcode Scanner will
response three beeps (tone ascending
from low to high), and its LED indicator
will flashing purple.
For Example:
4 Exit the Setting Mode... The CT10 Barcode Scanner will
response three beeps (tone descending
from high to low), and its LED indicator
will not flashing purple and power off.
Note: When any setup error occurs, the CT10 Barcode Scanner will respond with a long
beep (low tone), and its LED indicator will flashing purple.
Enter Setup
Enable Codabar
Exit with Save
9
Steps of Setup:
Enter the Setting Mode
For the scanner to enter the setting mode, you must have it read the "Enter Setup"
barcode, which will be located at the bottom of almost every page of this manual.
The CT10 Barcode Scanner will respond with three beeps (tone descending from high to
low), and its LED indicator becomes purple and go off quickly after reading the barcode.
For setting scanner parameters, see "Read a Setup Barcode" below.
Exit the Setting Mode with Save
For the scanner to exit the setting mode, you must have it read the "Exit with Save"
barcode, which will be located at the bottom of almost every page of this manual.
Just like reading the "Enter Setup" barcode, the scanner will respond with three beeps
(tone ascending from low to high) after reading the barcode.
Enter Setup
Details (eg: Enable/Disable a Barcode)
Exit Setup
Enter Setup
Exit with Save
10
Exit the Setting Mode without Save
If you want to exit the setting mode without saving any changes, you must have the
scanner read the "Exit without Save" barcode.
Just like reading the "Enter Setup" barcode, the scanner will respond with three beeps
(tone ascending from low to high) after reading the barcode.
Restore Factory Defaults
"Restore Factory Defaults" is a special barcode. The CT10 Barcode Scanner will respond
with a short beep (high tone) after reading this barcode. At this time, the scanner system
could restore factory defaults, and no need to read "Exit with Save" barcode again. The
Scanner defaults enable HID, PIN defaults 10010.
Note: Most of setting mode have restore factory defaults selection. The factory default
value for each setting is indicated by an asterisk "*".
You could use this barcode at the following status:
1、The scanner can not work. For example, it can not read barcodes.
2、You forget the settings you did to the scanner before, and you don't want to be affected
by the settings when you use the scanner.
3、After using a function which is not be used usually in the scanner.
Check Software Version
If you want to know the software version of CT10, should read the ‘Enter Setup’ and
‘Output Software Version’ barcode:
Restore Factory
Exit without Save
Table des matières
Manuels Lecteur de codes-barres populaires d'autres marques
POSMicro
POSMicro Datalogic PowerScan D7100 Manuel utilisateur
Marson
Marson MT780 Guide de configuration rapide
NCR
NCR RealPOS Manuel utilisateur
Motorola
Motorola SE3300 Guide de configuration rapide
Element
Element P130BT Manuel utilisateur
Motorola
Motorola Symbol LS3008 Manuel d'installation et d'exploitation
