DynaColor QIG-510 Series Manuel utilisateur

00P6H510CZXSEA6
Mini Speed Dome Camera
Indoor Dome Camera
Installation Guide
Version 1.6

Installation Guide
1
Preface
The information given in this manual was current when published. The company reserves
the right to revise and improve its products. All specifications are subject to change without
notice.
Notice
This manual provides the installation information for indoor Mini Speed Dome
Cameras. To work with the Dome Cameras, any installer or technician must
have the following minimum qualifications:
•A basic knowledge of CCTV systems and components
•A basic knowledge of electrical wiring and low-voltage electrical
hookups
•A basic knowledge of network system setting
•Have read this manual completely
Copyright
Under copyright laws, the contents of this user manual may not be copied,
photocopied, translated, reproduced or reduced to any electronic medium or
machine-readable format, in whole or in part, without prior written permission
of the company
Important Information
Before proceeding, please read and observe all instructions and warnings in
this manual. Retain this manual with the original bill of sale for future
reference and, if necessary, warranty service. When unpacking your unit,
check for missing or damaged items. If any item is missing, or if damage is
evident, DO NOT INSTALL OR OPERATE THIS PRODUCT. Contact your
dealer for assistance.
Regulation
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including
interference that may cause undesired operation.

Installation Guide
2
This symbol on the product or on its packaging indicates
that this product shall not be treated as household waste in
accordance with Directive 2002/96/EC. Instead it shall be
handed over to the applicable collection point for the
recycling of electrical and electronic equipment. By proper
waste handling of this product you ensure that it has no
negative consequences for the environment and human
health, which could otherwise be caused if this product is
thrown into the garbage bin. The recycling of materials will
help to conserve natural resources.
For more details information about recycling of this product,
please contact your local city office, your household waste
disposal service or the shop where you purchased the
product.
Compliance is evidenced by written declaration from our
suppliers, assuring that any potential trace contamination
levels of restricted substances are below the maximum
level set by EU Directive 2002/95/EC, or are exempted due
to their application.

Installation Guide
3
Warnings and Cautions
•Handle the camera carefully
Do not abuse the camera. Avoid striking, shaking, etc. The camera could
be damaged by improper handing or storage.
•Installing electricity wiring carefully
Ask qualified personnel of electrical wiring for the installation. Please note
that input electricity to the unit is at tolerance of DC 12V/AC 24V ± 10%.
The camera is capable of surge protection; ensure AC power model unit
grounded appropriately against damage of heavy current or electric
shock.
•Do not disassemble the camera
To prevent electric shock, do not remove screws or covers. There are no
user serviceable parts inside. Ask a qualified service person for servicing.
•Do not block cooling holes on the bracket
This camera has a cooling fan inside. Blocking the cooling holes leads to
build up of heat the camera and may cause malfunction.
•Do not operate the camera beyond the specified temperature,
humidity or power source ratings
Use the indoor dome camera under conditions where temperature is
between 0°C ~ 40°C (32°F ~ 104°F) and the outdoor camera under
conditions where temperature is between -30°C~45°C (-22°F~104°F), and
humidity is below 90%.
•Do not expose the indoor dome camera to rain or moisture, or try to
operated it in wet areas
The indoor dome camera is designed for indoor use or locations where it
is protected from rain and moisture. Turn the power off immediately if the
camera is wet and ask a qualified service person for servicing. Moisture
can damage the camera and also create the danger of electric shock.
•Do not use strong or abrasive detergents when cleaning the camera
body
Use a dry cloth to clean the camera when dirty. In case the dirt is hard to
remove, use a mild detergent and wipe gently.

Installation Guide
4
•Never face the camera towards the sun
Do not aim the camera at bright objects. Whether the camera is in use or
not, never aim it at the sun or other extremely bright objects. Otherwise,
the camera may be smeared or damaged.

Installation Guide
5
Table of Contents
1. Introduction.................................................................................................................7
2. Standard Package Contents ......................................................................................8
3. Camera Setups and Cable Connections.................................................................10
3.1 Dome Camera Setups................................................................................................... 10
3.1.1 Switch Definition ............................................................................................. 10
3.1.2 Communication Switch Setting........................................................................11
3.1.3 ID Setup.......................................................................................................... 12
3.1.4 Camera Control Protocol Setup...................................................................... 13
3.2 Cables and Connections ............................................................................................... 14
3.2.1 Cable Requirements....................................................................................... 14
3.2.2 22-Pin Data Cable .......................................................................................... 14
3.2.3 22-Pin Connector Definition............................................................................ 15
3.2.4 RS-485 Connector.......................................................................................... 17
3.2.5 Cable Wiring and Connection......................................................................... 17
3.2.6 Ethernet Cable Connection ............................................................................ 18
4. Dome Camera Installation........................................................................................19
4.1 Camera Dimensions...................................................................................................... 19
4.2 Optional Accessories..................................................................................................... 20
4.3 Ceiling Mount ................................................................................................................ 27
4.3.1 Hard Ceiling Mount......................................................................................... 27
4.3.2 In-Ceiling (T-Bar) Mounting ............................................................................ 31
4.3.3 Straight Tube .................................................................................................. 34
4.4 Wall Mount .................................................................................................................... 37
4.4.1 Swan Tube...................................................................................................... 37
4.4.2 Compact Pendent Mount................................................................................ 38
4.4.3 Standard Pendent Mount................................................................................ 40
4.4.4 Wall Box Mounting.......................................................................................... 42
4.5 Corner Mount ................................................................................................................ 44
4.5.1 Corner Standard Mounting Plate/Corner Plate Mini........................................ 44
4.5.2 Corner Thin/Wide Box Mounting..................................................................... 46
4.6 Pole Mount .................................................................................................................... 48
4.6.1 Pole Thin/Wide Direct Mounting ..................................................................... 48
4.6.2 Pole Thin/Wide Box Mounting ........................................................................ 50
5. System Expansion....................................................................................................52
5.1 Connecting with Connector Box .................................................................................... 52
5.2 Data Formats Transforming........................................................................................... 53
5.3 Signal Distribution Unit .................................................................................................. 54
6. System Integration ...................................................................................................55
6.1 Using Pelco Keyboard................................................................................................... 55
6.2 Using Philips Allegiant Keyboard................................................................................... 56

Installation Guide
6
Appendix A: Technical Specification .............................................................................57

Installation Guide
7
1. Introduction
The Mini Speed Dome Camera is a new subcompact high speed dome
camera designed to deliver superb performance and durability with an
intelligent and stylish housing that is suitable in any security and surveillance
installation.
General Operation Requirements:
A minimum of one control device is required for operation, such as a Control
Keyboard, a DVR or a PC. The Mini Dome Cameras contain a built-in receiver
that decodes commands originating from a control device.
Connect Dome Cameras to other devices, as shown in the diagram, to
complete a video surveillance system.
NOTE: To extend the network distance up to 1.2 km (4000 feet) and to
protect the connected devices, it is highly recommended to place a
repeater at the mid-point. However, a repeater may be needed in the network
distance less than 1.2 km if the used cables are not the CAT 5, 24-gauge
cables; see 3.3.4 RS-485 Connector Definition.Refer to the repeater’s
manual for detailed information.

Installation Guide
8
2. Standard Package Contents
Before proceeding, please check the box contains the items listed here. If any
item is missing, or if damage is evident, DO NOT install or operate the product
and contact your dealer for assistance.
Analog Model
Dome Camera
Data Cable for Power Supply, Video and Audio
(DC 12V)
Power Adaptor & Power Cord
(DC model only)
Data Cable for Power Supply, Video and Audio
(AC 24V)
Hard Ceiling Mount
&
Decoration Ring
M3 Screw,
Fixing Plate
Quick Guide
CD:
Operation
Manuals

Installation Guide
9
Network Model
Dome Camera
Data Cable for Power Supply, Video and Audio
(DC 12V)
Power Adaptor & Power Cord
(DC model only)
Data Cable for Power Supply, Video and Audio
(AC 24V)
Hard Ceiling Mount
&
Decoration Ring
M3 Screw,
Fixing Plate
Quick Guide
CD:
Operation
Manuals
Table des matières
Autres manuels DynaColor Caméra de sécurité

DynaColor
DynaColor S3 Manuel utilisateur

DynaColor
DynaColor NH820 Series Manuel utilisateur

DynaColor
DynaColor DH801 Manuel utilisateur

DynaColor
DynaColor NH720 Series Manuel utilisateur

DynaColor
DynaColor QIG-701-Series Manuel utilisateur

DynaColor
DynaColor W series Manuel utilisateur

DynaColor
DynaColor W series Manuel utilisateur

DynaColor
DynaColor DH701 Manuel utilisateur

DynaColor
DynaColor W-1 Manuel utilisateur
















