Duronic PS132 Manuel utilisateur
PS132
Shredder
PLEASE READ ALL THE INSTRUCTIONS BEFORE USE
2
3
English Manual
Manuel d’utilisation en français
Gebrauchsanleitung auf Deutsch
Manual de Instrucciones en Español
Manuale d’istruzioni In Italiano
Instrukcja obsługi. Polski
5
14
23
32
41
50
Contents
4
5
English Manual
6
Features and Specications
Model PS132
Shred Type Cross-Cut
Shred Size 28mm x 4mm
Shredding Capacity 3 Sheets of A4 paper (folded) or 6 x A6 paper
Duty Cycles 4 min on / 60 min off
Feed Opening 120mm / 12cm
Dimensions 220 x 200 x 180 mm
Bin Size 3.5 Litre
Weight 2kg
Power 120W
Input Voltage
/ Frequency 220-240V ~ 50/60Hz
2
3
1
1. Feed opening 2. Paper bin 3. Control switch
7
PLEASE READ THIS MANUAL CAREFULLY AND RETAIN FOR FUTURE
REFERENCE
BEFORE USE
• Dispose of all packaging carefully and responsibly.
• This appliance is designed for indoor use only. Do not use outdoors.
• Do not use this shredder for industrial and commercial use, or any other
purpose.
• The shredder MUST be positioned on a rm level base before and during use.
• Ensure the power cable is not caught under the appliance.
• Ensure the correct power supply is used (220-240V AC).
• Keep the power cable away from hot surfaces.
• Do not place the shredder near a heat source or in direct sunlight.
• Do not operate under or near curtains or other combustible materials.
• Do not immerse the machine in water or any other liquid to protect against
electric shock.
• Do not spray any ammable synthetic oil, petroleum-based or aerosol
products onto this shredder as it may cause a re.
• Do not allow the shredder to be exposed to rain or any other moisture.
• Do not attempt to repair the shredder by yourself. If for any reason your
shredder stops working properly, contact Duronic Customer Care Team for
advice.
Safety Information
8
DURING USE
• WARNING! Keep loose articles of clothing; ties, jewellery, hair or other objects
away from the feed opening in order to prevent injury.
• Never insert ngers into the feed opening. Serious injury may result!
• This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
• DO NOT leave children unattended with the shredder.
• ALWAYS keep the shredder off and unplugged when not in use.
• DO NOT attempt to feed more sheets of paper into the feeder than specifed.
• ALWAYS limit continuous shredding to the specifed time as suggested in the
instruction manual. See section titled ‘Capacity’.
• DO NOT attempt to shred materials other than paper and credit cards in the
provided feed slots.
• Remove staples and paperclips from paper before shredding
• To avoid overheating the shredder, limit continuous shredding to the specifed
time as suggested in this instruction manual.
• Do not operate the shredder if the cable or plug are damaged or if the
shredder has malfunctioned in any way.
• ALWAYS unplug the shredder when moving, cleaning or emptying the waste
basket.
• DO NOT attempt to operate the shredder if the shredder is experiencing any
kind of problem.
• If your machine stops working, do not attempt to repair it yourself!
• Contact the Duronic Customer Care Team for assistance.
Safety Information (continued)
9
• Never use any sharp instruments or abrasive substances, soap, household
cleaner, detergent or wax polish for cleaning.
• Never clean the appliance with ammable uids. It could cause a damage
and re hazard.
• Use lukewarm water on a cloth to clean the cabinet and waste basket of the
appliance and wipe it dry.
• Ensure the unit is dry before connecting to the mains.
Cleaning and Maintenance
Warning Icons
Please take note of these warnings displayed on the machine:
WARNING NO CHILDREN
NO AEROSOL
PRODUCTS
MAX 2-3 A4 PAPER
FOLDED IN HALF
NO FINGERS
OR HANDS
NO HAIR NO LOOSE
CLOTHING
IMPORTANT: Always unplug the appliance from the power socket
during cleaning and maintenance.
10
1. Carefully place the PS132 shredder on a dry, at, level surface.
2. Ensure that the waste bin is properly in place inside the machine.
3. Be careful not to place your ngers near the cutter blades.
4. Plug the power cable into any standard 220-240-Volt AC mains outlet / plug
socket which should be located near the shredder and should be easily
accessible.
5. Place the switch into the AUTO position.
The power switch is located on the top of the shredder. The switch has three
settings: AUTO, OFF, Reverse/REV.
When AUTO is selected, the shredding process is started automatically by
inserting paper into the feed opening. The shredder will also stop automatically
when the paper has completed its travel through the feed opening.
REV mode is used to assist in the removal of a paper jam. This reverses the
shredding process before the cycle nished, thus clearing the cutting blades.
Select the OFF mode when emptying the waste bin or when the shredder is not in
use for a long period of time.
You are now ready to start shredding.
Setup
Operation
Table des matières
Langues :
Autres manuels Duronic destructeur de papier
Duronic
Duronic PS991 Manuel utilisateur
Duronic
Duronic PS571 Manuel utilisateur
Duronic
Duronic PS285 Manuel utilisateur
Duronic
Duronic PS391 Manuel utilisateur
Duronic
Duronic PS410 Manuel utilisateur
Duronic
Duronic PS609 Manuel utilisateur
Duronic
Duronic PS657 Manuel utilisateur
Duronic
Duronic PS591 Manuel utilisateur
Duronic
Duronic PS712 Manuel utilisateur
Duronic
Duronic PS815 Manuel utilisateur
Manuels destructeur de papier populaires d'autres marques
Swingline
Swingline STACK-AND-SHRED200X&200XL 60X Mode d’emploi
GBC
GBC ShredMaster CC055 Manuel utilisateur
UNITED OFFICE
UNITED OFFICE UAV 190 A1 Manuel utilisateur
UNITED OFFICE
UNITED OFFICE UAV 190 A1 Manuel utilisateur
Rexel
Rexel Optimum AutoFeed+ 45X Manuel utilisateur
Martin Yale
Martin Yale 227284S1 Manuel utilisateur
