Intended Use
The product is intended for non-commercial use for tightening and loosening screws and fasteners.
The device must be operated according to the guidelines in the operating instructions.
Any unintended use or any activities on the device not described in these operating instructions are an
unauthorized misuse outside the manufacturer’s legal liability limits and warranty.
General safety information
• The user of the device must have read and understood these operating instructions prior to its first
use for save handling of this device.
• Always keep the operating instructions.
• If you sell or pass on the device, you must also pass on these operating instructions.
• Please note all safety information! If you ignore the safety information, you will jeopardize yourself
and others.
• Keep the device away from children and unauthorized persons.
Operation/workplace
• Always comply with the all applicable domestic and international safety, health, and working
regulations.
• The device may only be put into operation if no defects are found when it is checked. If a part is
defective it must be replaced before the device is used again.
• Individuals not familiar with the operation of the device should not be allowed to operate the device.
• People who do not have the physical, mental or sensory abilities to operate the tool carefully and
safety may not be permitted to use it.
• Exercise caution and only work when in good condition: If you are tired, ill, or under the influence of
alcohol, medication or other substances, do not use the device as you are not in a condition
considered to use it safely.
• Make sure that flammable or hazardous materials or materials are kept out of the immediate vicinity.
• Do not overload the device. Only use the device for its intended light-duty purpose.
Device-specific safety information
• The device may only be used, if it is perfectly in working order. If the device or a part thereof is
defective, it must be replaced prior to the next use.
• Keep the work area clean and orderly when working with the device.
• Keep the handles dry and free of dirt, grease, and debris.
