Duerkopp Adler 281 Manuel utilisateur

中

文

281

特殊缝制设备

Instruction manual

操作说明书

Manufacturer: Dürkopp Adler Sewing Machine (Suzhou) Co., Ltd.

Wanping East Road, Wujiang, Suzhou, Jiangsu Province 215223, China

Contact: Dürkopp Adler AG, PO Box 17 03 51, D-33703 Bielefeld, Potsdamerstr. 190, D-33719 Bielefeld,

Phone +49 (0) 521 9 25 00, Fax +49 (0) 521 9 25 24 35, www.duerkopp-adler.com

制造商 : 杜克普爱华缝制设备（苏州）有限公司

中国江苏省苏州市吴江市横扇镇菀坪东路邮政编码：215223

联系单位 : Dürkopp Adler AG, PO Box 17 03 51, D-33703 Bielefeld, Potsdamerstr. 190, D-33719 Bielefeld,

Phone +49 (0) 521 9 25 00, Fax +49 (0) 521 9 25 24 35, www.duerkopp-adler.com

Ausgabe / Edition: Änderungsindex Teile-Nr./Part.-No.:

06/2011 Rev. index: 04.0 Printed in China 中国印制 0791 281741

Property of Dürkopp Adler and copyrighted. Reproduction or publication of the content in any manner, even in ex-

tracts, without prior written permission of Dürkopp Adler, is prohibited.

版权和产权归杜克普爱华有限公司所有。未经杜克普爱华有限公司书面许可，禁止以任何方式翻印或复印本内容，

包括摘要。

Contents Page

Part 1: Operating Instructions Class 281 - Original Instructions

(Edition 06/2011)

1 General Safety Instructions .......................................................................................................... 1

2 Product description ....................................................................................................................... 3

2.1 Product description.......................................................................................................................... 3

2.2 Designated use................................................................................................................................. 3

2.3 Technical Data Subclasses .............................................................................................................. 5

3Operation....................................................................................................................................... 7

3.1 Threading the needle thread ............................................................................................................ 7

3.2 Setting Needle Thread...................................................................................................................... 8

3.3 Loosening the needle thread tension .............................................................................................. 9

3.4 Winding on the hook thread ............................................................................................................ 10

3.4.1 Adjusting the bobbin wind-on quantity ........................................................................................... 11

3.5 Inserting the hook thread bobbin .................................................................................................... 12

3.6 Adjusting the hook thread tension ................................................................................................... 13

3.7 Changing the needle ........................................................................................................................ 14

3.8 Adjusting the thread regulator ......................................................................................................... 15

3.9 Adjusting the stitch length ............................................................................................................... 16

3.10 Adjusting the sewing foot pressure.................................................................................................. 16

3.11 Lifting the sewing foot ..................................................................................................................... 17

3.12 Locking the sewing foot in lifted position......................................................................................... 17

3.13 Push button on the machine arm .................................................................................................... 18

3.14 Operating panel DAC basic / classic ............................................................................................... 19

3.14.1 Keys and their functions on the operating panel ............................................................................. 19

3.15 Sewing ............................................................................................................................................. 20

4 Maintenance .................................................................................................................................. 23

4.1 Hook lubrication (only for subclasses with oil lubrication of the hook) ........................................... 24

4.2 Gear box lubrication ........................................................................................................................ 25

Foreword

This instruction manual is intended to help the user to become familiar

with the machine and take advantage of its application possibilities in

accordance with the recommendations.

The instruction manual contains important information on how to

operate the machine securely, properly and economically. Observation

of the instructions eliminates danger, reduces costs for repair and

down-times, and increases the reliability and life of the machine.

The instruction manual is intended to complement existing national

accident prevention and environment protection regulations.

The instruction manual must always be available at the machine/sewing

unit.

The instruction manual must be read and applied by any person that is

authorized to work on the machine/sewing unit. This means:

–Operation, including equipping, troubleshooting during the work

cycle, removing of fabric waste,

–Service (maintenance, inspection, repair) and/or

–Transport.

The user also has to assure that only authorized personnel work on the

machine.

The user is obliged to check the machine at least once per shift for

apparent damages and to immediatly report any changes (including the

performance in service), which impair the safety.

The user company must ensure that the machine is only operated in

perfect working order.

Never remove or disable any safety devices.

If safety devices need to be removed for equipping, repairing or

maintaining, the safety devices must be remounted directly after

completion of the maintenance and repair work.

Unauthorized modification of the machine rules out liability of the

manufacturer for damage resulting from this.

Observe all safety and danger recommendations on the machine/unit!

The yellow-and-black striped surfaces designate permanend danger

areas, eg danger of squashing, cutting, shearing or collision.

Besides the recommendations in this instruction manual also observe

the general safety and accident prevention regulations!

General safety instructions

The non-observance of the following safety instructions can cause

bodily injuries or damages to the machine.

1. The machine must only be commissioned in full knowledge of the

instruction book and operated by persons with appropriate training.

2. Before putting into service also read the safety rules and

instructions of the motor supplier.

3. The machine must be used only for the purpose intended. Use of

the machine without the safety devices is not permitted. Observe all

the relevant safety regulations.

4. When gauge parts are exchanged (e.g. needle, presser foot, needle

plate, feed dog and bobbin) when threading, when the workplace is

left, and during service work, the machine must be disconnected

from the mains by switching off the master switch or disconnecting

the mains plug.

5. Daily servicing work must be carried out only by appropriately

trained persons.

6. Repairs, conversion and special maintenance work must only be

carried out by technicians or persons with appropriate training.

7. For service or repair work on pneumatic systems, disconnect the

machine from the compressed air supply system (max. 7-10 bar).

Before disconnecting, reduce the pressure of the maintenance unit.

Exceptions to this are only adjustments and functions checks made

by appropriately trained technicians.

8. Work on the electrical equipment must be carried out only by

electricians or appropriately trained persons.

9. Work on parts and systems under electric current is not permitted,

except as specified in regulations DIN VDE 0105.

10. Conversion or changes to the machine must be authorized by us

and made only in adherence to all safety regulations.

11. For repairs, only replacement parts approved by us must be used.

12. Commissioning of the sewing head is prohibited until such time as

the entire sewing unit is found to comply with EC directives.

13. The line cord should be equipped with a country-specific mains

plug. This work must be carried out by appropriately trained

technicians (see paragraph 8).

It is absolutely necessary to respect the safety

instructions marked by these signs.

Danger of bodily injuries !

Please note also the general safety instructions.

2 Product description

2.1 Product description

The DÜRKOPP ADLER 281 is a special sewing machine for universal use.

It is a single-needle double-lockstitch machine with bottom feed for light

to medium weight material and equipped with a standard sewing equip-

ment (E2) for general sewing operations on clothing.

Integrated sewing motor on the upper shaft.

Maximum sewing speed of 5,000 stitches/min (factory setting

4,800 stitches/min.)

Stitch length 4.5 mm.

Thread trimmer, automatic electromagnetic bartacking.

Electromagnetic thread clamp, to be switched on and off on the operating

panel.

Integrated drive lock for stopping the sewing drive while the machine head

is swivelled.

2.2 Designated use

The class 281 is a sewing machine head designed for the sewing of light to

medium weight material. This kind of material consists in general of textile fi-

bers or leather and is used in the clothing industry and for domestic and car

upholstery.

It exists also the possibility of executing so-called technical seams with this

sewing machine head. In this case the customer (DÜRKOPP ADLER would

be pleased to cooperate) has to evaluate the possible dangers, since these

kinds of applications are rather rare and their variety is immense. Depending

on the result of this risk evaluation appropriate safety precautions must pos-

sibly be taken.

Generally only dry material may be sewn with this sewing machine head.The

material must not contain hard objects, since otherwise the sewing machine

head could only be operated with an additional eye-protection device. Such

a device is currently not available.

The seam is generally effectuated with sewing thread consisting of textile fi-

bers with a gauge of up to 30/3 NeB (cotton threads), 30/2 Nm (synthetic

threads) or 30/3 Nm (covering thread).

If other threads are to be used, the resulting dangers must first be evaluated

and if necessary safety precautions must be taken

The sewing machine may be set up and operated only in dry and well-main-

tained premises. If the sewing machine is used in premises that are not dry

and well-maintained further precautions, which have to be negotiated before-

hand (see EN 60204-31: 1999) may become necessary.

As manufacturers of industrial sewing machines we expect that the personnel

operating our products has at least received sufficient training in order to ac-

quaint it with all regular operations and their possible dangers.

2.3 Subclasses

281-140342-01 Single-needle double-lockstitch machine with bottom

feed and electro-pneumatic sewing foot lifting.

Lubricated hook.

2.4 Optional Equipment

For the 281 the following optional equipment are available:

Order-No. Optional Equipment Subclass

281-140342-01

0281 590034 LED sewing lamp, on the sewing machine head X

N900 012015 Edge guide on the right side, 0 - 14 mm,

fixed on the bed plate, to be swivelled horizontally

N900 011038 Edge guide on the right side (immovable), 0 - 40 mm

fixed on the bed plate

N900 020021 Edge guide on the right side, 0 - 50 mm, swinging upwards,

fastened to the cloth presser bar bushing

N900 020023 Edge guide on the right and left side, 0 - 60 mm, swinging upwards,

fastened to the cloth presser bar bushing

N900 023421 Edge guide on the right side, 0 - 40 mm

with sewing foot lifting,

fastened to the cloth presser bar bushing

0204 001322 Articulated compensation foot for margin topstitching,

0.8 mm to the right of the needle

0204 001322A Articulated compensation foot for margin topstitching,

1.6 mm to the right of the needle

2.5 Technical Data

Noise: Workplace-related emission value in accordance with DIN 45635-48-A-1-KL2

281-140342 LC = _dB (A)

Stitch length: _ mm Sewing foot stroke: __ mm Speed: ____ min -1

2.6 Technical Data Subclasses

Subclasses

281-140342-01

Type of stitch Lockstitch 301

Hook type Horizontal hook

lubricated

Number of needles 1

Needle system 134 / 797 / Dxp1

Dimension of the needle bar piston [mm] 2.0/ 1.62

Needle size [Nm] 65 - 120

Max. sewing thread [Nm] 30 / 3

Stitch length forward/ backward [mm] 4.5

Max. Speed [min-1]5,000

Speed at delivery [min-1]4,800

Sewing foot stroke max when lifted with the knee lever [mm] 14.5

Sewing foot stroke max when lifted with the solenoid [mm] 12

Sewing foot stroke at delivery [mm] 9

Weight [kg] 42

Rated voltage [V/Hz] 200 - 240V

50/60Hz

Rated voltage at delivery [V/Hz] 1 x 230V

50/60Hz

Rated output [kVA] 0.5

Dimension of package including machine head, kit, drive L =785, H = 694, B = 300 mm

Gross weight [kg] 54.5

Autres manuels pour 281

Table des matières

Autres manuels Duerkopp Adler Machine à coudre

Duerkopp Adler

Duerkopp Adler 281 Mode d'emploi

Duerkopp Adler

Duerkopp Adler 467 Mode d’emploi

Duerkopp Adler

Duerkopp Adler 841-27 Manuel utilisateur

Duerkopp Adler

Duerkopp Adler 961-16-1 Manuel utilisateur

Duerkopp Adler

Duerkopp Adler 975-1-1 Mode d’emploi

Duerkopp Adler

Duerkopp Adler 541 Mode d’emploi

Duerkopp Adler

Duerkopp Adler 4181-3 Guide de dépannage

Duerkopp Adler

Duerkopp Adler 171 Manuel utilisateur

Duerkopp Adler

Duerkopp Adler 550-12 Mode d’emploi

Duerkopp Adler

Duerkopp Adler 4180-1 Guide de dépannage

Duerkopp Adler

Duerkopp Adler 550-867 s Manuel utilisateur

Duerkopp Adler

Duerkopp Adler 550-19-2 Mode d’emploi

Duerkopp Adler

Duerkopp Adler 506-3 Mode d'emploi

Duerkopp Adler

Duerkopp Adler 204-370 Mode d’emploi

Duerkopp Adler

Duerkopp Adler 528 Manuel utilisateur

Duerkopp Adler

Duerkopp Adler N291 Manuel utilisateur

Duerkopp Adler

Duerkopp Adler 251-140042 Manuel utilisateur

Duerkopp Adler

Duerkopp Adler 867-70 ECO Manuel utilisateur

Duerkopp Adler

Duerkopp Adler 510 Manuel utilisateur

Duerkopp Adler

Duerkopp Adler 578 Mode d’emploi

Duerkopp Adler

Duerkopp Adler 540-100-1 Manuel utilisateur

Duerkopp Adler

Duerkopp Adler 4181i Manuel utilisateur

Duerkopp Adler

Duerkopp Adler 366 Manuel utilisateur

Duerkopp Adler

Duerkopp Adler 743-461-22 Mode d’emploi

Manuels Machine à coudre populaires d'autres marques

Riccar

Riccar RL634DE Manuel utilisateur

Singer

Singer 2517 Manuel utilisateur

Pfaff

Pfaff 3307-1 SERIES Manuel utilisateur

Janome

Janome Quilt Maker Pro 18 VERSA Manuel utilisateur

Siruba

Siruba C007JP Manuel utilisateur

Husqvarna Viking

Husqvarna Viking Designer SE Manuel utilisateur

Singer

Singer 148-5 Manuel utilisateur

IKEA

IKEA SY Manuel utilisateur

Pfaff

Pfaff 571 Manuel utilisateur

Singer

Singer 15-91 Manuel utilisateur

Brother

Brother BB370 Manuel utilisateur

Pegasus

Pegasus WT100 Series Manuel utilisateur

Reliable

Reliable 7100DB Manuel utilisateur

Pfaff

Pfaff 937 Manuel utilisateur

Singer

Singer 6038 Manuel utilisateur

Singer

Singer 413K Manuel utilisateur

Pfaff

Pfaff 1471 E1 Manuel utilisateur

Kenmore

Kenmore 16677 - Serger Sewing Machine Manuel utilisateur