Dual XDVD8265 Mode d'emploi
INSTALLATION/OWNER’S MANUAL
DVD Multimedia Receiver with 6.5” Touch Screen Display
XDVD8265
The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to
prevent driver distraction. In-dash DVD video functions will only operate when vehicle is in Park and the parking
brake is engaged. It is illegal in most states for the driver to view video while the vehicle is in motion.
Safety Note:
2
DVD Region Management
Some DVD discs can be played only in certain playback modes according to the intentions of the software. As the
XDVD8265 plays discs according to their intentions, some functions may not work as intended. Please be sure to
read the instructions provided with each disc. This player has been designed to play back DVD software that has
been encoded for specific region areas. It cannot play back DVD software encoded for other region areas than the
region areas for which it has been designed.
The XDVD8265 will play discs labeled “Region 1” or “All”.
DVD region codes:
1 - USA, Canada
2 - Japan, Europe, South Africa, Middle East
3 - Rep. of Korea, Taiwan, Hong Kong, Parts of Southeast Asia
4 - Australia, New Zealand, Mexico, South America
5 - Eastern Europe, Russia, India, Africa
6 - China
2
3
4-8
9
10
11
12-16
17-19
20-21
22-23
24-27
28-29
30
31-32
33
34
35
Back Cover
Page
DVD Region Management . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . .
Safety Information/Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mounting/Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Control Locations -Receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Control Locations - Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
General Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
General Setup Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DVD Setup Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
System Setup Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AM/FM Tuner Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DVD Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CD Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MP3/WMA Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DVD/MP3/WMA Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Navigation/Auxiliary Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
XDVD8265 PREPARATION
Table of Contents
33
Please read all instructions carefully before attempting to install or operate.
Due to its technical nature, it is highly recommended that your DUAL XDVD8265 is installed by a professional
installer or an authorized dealer. This product is only for use in vehicles with 12VDC negative ground only.
Safety Notes:
The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to
prevent driver distraction. In-dash DVD video functions will only operate when vehicle is in Park and the parking
brake is engaged. It is illegal in most states for the driver to view video while the vehicle is in motion.
To prevent damage or injury:
1. Make sure to ground the unit securely to the vehicle chassis ground.
2. Do not remove the top or bottom covers of the unit.
3. Do not install the unit in a spot exposed to direct sunlight or excessive heat or the possibility of water splashing.
4. Do not subject the unit to excessive shock.
5. When replacing a fuse, only use a new one with the prescribed rating. Using a fuse with the wrong rating may
cause the unit to malfunction.
6. To prevent short circuits when replacing a fuse, disconnect the wiring harness first.
7. Use only the provided hardware and wire harness.
8. You cannot view video while the vehicle is moving. Find a safe place to park and engage the parking brake.
9. If you experience problems during installation, consult your nearest DUAL dealer.
10. If the unit malfunctions, press the reset button first. If the problem still persists, consult your nearest DUAL
dealer or call tech assistance @ 1-866-382-5476.
11. To clean the monitor, wipe only with a dry silicone cloth or soft cloth. Do not use a stiff cloth, or volatile solvents
such as paint thinner and alcohol. They can scratch the surface of the panel and/or remove the printing.
12. When the temperature of the unit falls (as in winter), the liquid crystal inside the screen will become darker than
usual. Normal brightness will return after using the monitor for a while.
Additional notes:
1. When extending the ignition, battery or ground cables, make sure to use automotive-grade cables or other cables
with an area of 0.75mm (AWG 18) or more to prevent voltage drops.
2. Do not touch the liquid crystal fluid if the LCD is damaged or broken. The liquid crystal fluid may be hazardous
to your health or fatal. If the liquid crystal fluid from the LCD contacts your body or clothing, wash it off with soap
immediately.
This device complies with part 15 of the FCC rules and regulations.
Operation is subject to the following two conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received, including interference that may cause undesired operation.
XDVD8265 PREPARATION
Safety Information
4
Please read entire manual before installation.
Before You Start
• Disconnect negative battery terminal. Consult a qualified technician for instructions.
• Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it
would be subject to dust, dirt or excessive vibration.
Getting Started
Insert the supplied keys into the left and right sides as shown, and slide the unit out of the mounting sleeve.
Mounting Options
1. Rear ISO-DIN (using OEM factory radio mounting brackets):
• Remove factory radio mounting brackets and attach to the left and right sides of the XDVD8265 chassis.
• See diagram on page 5.
2. Rear ISO-DIN (using included universal mounting brackets):
• Attach left and right mounting brackets to the left and right sides of the XDVD8265 chassis.
• See diagram on page 5.
3. Front load (using mounting sleeve):
• Install mounting sleeve into opening, bending tabs to secure.
• Connect wiring harness and antenna as shown on pages 6-7. Consult a qualified technician if you are unsure.
• Certain vehicles may require a wiring harness adapter (sold separately).
• Test for correct operation and mount the XDVD8265 according to your application.
• The trim ring may be required for some applications. Using a utility knife, score the trim ring on the back side to
trim the depth and width as needed. Use the supplied 4 strips of double-sided tape to attach the trim ring.
• Mount the iplug™ adapter to any smooth clean surface using the supplied double-sided tape or #2 x 3/8” Phillips
head screws.
XDVD8265 INSTALLATION
Preparation
5
XDVD8265 INSTALLATION
Mounting Options
TYPICAL REAR-LOAD ISO-DIN MOUNTING
TYPICAL REAR-LOAD MOUNTING USING UNIVERSAL MOUNTING BRACKETS
TYPICAL FRONT-LOAD MOUNTING USING MOUNTING SLEEVE AND TRIM RING
Mount factory radio
brackets to the
chassis using the
supplied M5 x 6 mm
screws.
6
XDVD8265 INSTALLATION
Wiring Diagram - Inputs/Outputs
Center channel output
The center channel audio output (Blue RCA) must be connected to an external amplifier (not included) to hear
center channel audio.
Subwoofer output
The subwoofer audio output (Black RCA) is active in all audio modes.
Video output
The video output (Yellow RCA) provides composite video output for rear monitors, etc.
Rear view camera
The rear camera input (Black RCA) can be connected to an optional rear view camera.
Wiring Notes:
7
Connecting the parking brake lead (Yellow/Blue - )
The Yellow/Blue lead MUST be connected for the
in-dash monitor to operate properly. The DVD
video display of the in-dash unit will not operate
while the vehicle is moving. This is a safety
feature to prevent driver distraction. In-dash DVD
video functions will only operate when vehicle is
in Park and the parking brake is engaged. It is
illegal in most states for the driver to view video
while the vehicle is in motion. This wire must be
connected in accordance with all local, state and
federal laws in your area.
Connecting the reverse lamp lead (White/Brown + )
The White/Brown lead connects to the vehicle
reverse lamp circuit (optional). When reverse
gear is selected, the unit will automatically select
rear view mode and display the image on screen.
This will allow the driver to view images from
a back-up camera (optional) connected to the
dedicated rear camera input.
Note: The Rear View camera must be set to ON to
view images when reverse gear is selected. See
page 20 for details.
Speaker Connections
Do not connect any speaker leads to chassis
ground or each other as severe damage will
occur. Use 4 ohm speakers with a 60 watt
(minimum) power rating only.
Fuses
When replacing a fuse, make sure new fuse is
the correct type and amperage. Using an incorrect
fuse could damage the unit. To prevent accidental
shorts, insulate any unused wires.
XDVD8265 INSTALLATION
Wiring Diagram - Power/Speakers
8
XDVD8265 OPERATION
Wiring Diagram - Optional A/V Connections
The diagram above illustrates the connection capabilities of the XDVD8265. Two separate Audio/Video inputs
allow the connection of a DVD player or game console. A dedicated video output provides video signal for external
monitors while a rear view camera can be connected to provide assistance when backing up your vehicle. Visit
your local DUAL dealer for more details.
* All items shown above are optional and sold separately.
9
Eject - Press to allow the front panel to slide down to insert/eject discs.
Reset - Press and hold the RESET button to reset the main unit upon initial
installation or if abnormal operation occurs. The reset button is located to the
right side of the disc slot.
Angle - Press to select between 4 different monitor view angles.
Mute - Press to silence the audio, press again to cancel.
Mode - Press to select between various modes of operation.
Volume Up - Press to increase the volume level.
Volume Down - Press to decrease the volume level.
Power - Press to turn the unit on/off.
Infrared Sensor
TFT Touch Screen LCD
1
6
2
3
4
5
XDVD8265 OPERATION
Control Locations - Receiver
3
4
5
6
7
8
9
10
1
7
8
9
Caution
• Due to its highly technological design, the XDVD8265 faceplate is NOT removable.
Do not attempt to remove the faceplate.
• This model incorporates a motorized moving monitor. Before final installation, make sure the monitor will not
obstruct the dash or shifter.
• Upon installation, do not attempt to move the monitor by hand. Use the ANGLE button on the faceplate or the
remote control only.
2
10
10
XDVD8265 OPERATION
Control Locations - Remote
Power
Preset #3
Preset #4
Preset #7
Preset #8
Key #0
BSM (Best Station Memory)
4-Way - Up
Stop
OK/Enter
4-Way - Right
4-way - Down
Fast Forward/Manual Tune Up
1
2
3
4
5
6
7
8
9
10
11
12
13
Mute
Volume Up
Title
Repeat/Random
Navi
Aux 1
Band
Display
Aux 2
Setup Menu
Radio
DVD
Zoom
14
15
16
17
18
19
20
21
22
23
24
25
26
Subtitle
Volume Down
Fast Forward/Manual Tune Down
4-Way - Left
Play/Pause
Angle
Key #9
Preset #5
Preset #6
Preset #1
Preset #2
27
28
29
30
31
32
33
34
35
36
37
* The remote control uses one 3 volt Lithium CR2025 battery. For best performance, replace only with CR2025 or equivalent.
1
23
45
67
89
10 11
12 13
14 15
16 17
18 19
20
21
37
36
35
34
33
32
31
30
29
28
27
26
25
24
23
22
Table des matières
Autres manuels Dual Système vidéo embarqué
Dual
Dual XDVD1002CM Mode d'emploi
Dual
Dual XDVD710 Mode d'emploi
Dual
Dual DV271BT Mode d'emploi
Dual
Dual XDVD110BT Mode d'emploi
Dual
Dual XDVD8182 Mode d'emploi
Dual
Dual xdvd136bt Mode d'emploi
Dual
Dual XDVD700 Mode d'emploi
Dual
Dual DAC1025BT Mode d'emploi
Dual
Dual XDVD8130 Mode d'emploi
Dual
Dual XDVD8183N Mode d'emploi
Dual
Dual XDVDN8190 Mode d'emploi
Dual
Dual XDV8125 Mode d'emploi
Dual
Dual XDCPA11BT Mode d'emploi
Dual
Dual XDVD9101 Mode d'emploi
Dual
Dual DV527BT Mode d'emploi
Dual
Dual XDVD710 Mode d'emploi
Dual
Dual XDVD270 Manuel utilisateur
Dual
Dual DV526BT Mode d'emploi
Dual
Dual DV715B Mode d'emploi
Dual
Dual DMCPA9BT Mode d'emploi
