DSC Power 832 PC5010 Manuel utilisateur

Code Changes

Access Codes

Access codes are used to arm and disarm the system. There are 32 access codes available: 1 master code, 32

regular access codes, 2 duress codes and 2 partition master codes. Ask your installer for more information on

using the duress and partition master codes.

Only the Master Code can be used to program additional security codes and to change other system fea-

tures as well as to arm and disarm the security system. The Master Code will be supplied to you by your

installer. All keypad entries are made by pressing one key at a time.

NOTE: An access code can be a four or six digit number depending on how your installer has programmed

your system. Ask your installer for more information regarding access codes.

Programming Security Codes

Programming codes from an LED or LCD5501Z Keypad:

The Master Code

To program the Master Code, enter [*][5][current Master Code][40][new Master Code]. The Master Code must

be four digits unless otherwise indicated by your installer. Enter digits 0 through 9 only.

Press [#] 3 times to return to the Ready state.

Be sure to record your new Master Code on the “System Information” page in this booklet.

NOTE: We recommend that the factory default Master Code [1234] not be used.

Additional Codes

Up to 36 additional codes may be programmed. Codes 01-32 are regular access codes. Codes 33 and 34 are

duress codes. Codes 41 and 42 are the partition 1 and partition 2 master codes, respectively.

To program a new code:

Enter [*][5][Master code][code number][new access code]. The code number is a double-digit number from

01-34 or 41-42.

Access codes must be four digits long. Enter digits 0 through 9 only.

To exit code programming, press [#] 3 times.

If an access code already exists for the code number you have selected, it will be replaced by the new code.

To erase a code:

Enter [*][5][Master code][code number][*]. To exit code programming, press [#] 3 times.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels DSC Système de sécurité

DSC

DSC PowerSeries PC1404 Manuel utilisateur

DSC

DSC Impassa WT4911 Manuel utilisateur

DSC

DSC PowerSeries PC1404 Manuel utilisateur

DSC

DSC Power8 PC5005 Manuel utilisateur

DSC

DSC MAXSYS PC4020 Manuel utilisateur

DSC

DSC PC 4010 Manuel du propriétaire

DSC

DSC Power 864 Manuel utilisateur

DSC

DSC 2550 Mode d’emploi

DSC

DSC Envoy NT9010 Manuel utilisateur

DSC

DSC Voice Assisted Security Control Escort5580TC Manuel utilisateur

DSC

DSC 3G2055 Manuel utilisateur

DSC

DSC PowerSeries SCW9045-433 v1.0 Manuel utilisateur

DSC

DSC Escort5580 Voice Assisted Security Control Manuel utilisateur

DSC

DSC SEA-B-QUE Manuel utilisateur

DSC

DSC Impassa PT4 Manuel utilisateur

DSC

DSC PowerSeries PC1404 Manuel utilisateur

DSC

DSC PC1550 Manuel utilisateur

DSC

DSC PC1500 Manuel utilisateur

DSC

DSC neo HS2016 Manuel utilisateur

DSC

DSC Envoy NT9005 Manuel utilisateur

DSC

DSC PC1832 series Manuel du propriétaire

DSC

DSC PC3000 Manuel utilisateur

DSC

DSC WLS900 Manuel utilisateur

DSC

DSC PC2580 Manuel utilisateur

Manuels Système de sécurité populaires d'autres marques

Inner Range

Inner Range Concept 2000 Manuel utilisateur

Climax

Climax Mobile Lite R32 Instructions de montage

CADDX

CADDX NX-6 Manuel utilisateur

FBII

FBII XL-31 Series Manuel utilisateur

Johnson Controls

Johnson Controls PENN Connected PC10 Manuel utilisateur

Aeotec

Aeotec Siren Gen5 Manuel utilisateur

Blaupunkt

Blaupunkt SA 2700 Manuel utilisateur

IDEAL

IDEAL Accenta Manuel du propriétaire

AJAX

AJAX DoubleButton Manuel utilisateur

Swann

Swann SW-P-MC2 Manuel utilisateur

Ecolink

Ecolink Siren+Chime Manuel utilisateur

Digital Monitoring Products

Digital Monitoring Products XR150 Manuel utilisateur

EDM

EDM Solution 6+6 Wireless-AE Manuel utilisateur

Highway Safety Group

Highway Safety Group EA401 Manuel utilisateur

Siren

Siren LED GSM Manuel utilisateur

Detection Systems

Detection Systems 7090i Instructions de montage

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuel utilisateur

Siemens

Siemens FDM273 Manuel utilisateur