User manual
WINE COOLER | MALBEC 7
If the unit is disconnected, you must leave at least 5 minutes before restarting the
appliance or reconnecting to the network.
APPARATUS AND ADJUST ON TEMPERATURE
To switch on, press the ON / OFF button (1) for 5 seconds.
The set temperature in the apparatus is adjustable in the range of 5 ° C - 22 ° C / 40 ° F
- 72 ° F.
When press temperature more (4) or less (5) for the first time, the LED will display the
factory default of 12 ° C / 54 ° F adjustment.
Use the temperature more (4) and minus (5) to adjust the desired temperature.
The temperature increase 1 ° C or 1 ° F pressing the plus (4) once and decrease by the
same amount by pressing the minus button (5) once.
When a new temperature setting, the display will show the above temperature for 5
seconds before showing the actual temperature. During this time, the cabinet
temperature will be adjusted accordingly.
To see the set temperature, press the button (4) or less (5). The display will flash the
temperature for 5 seconds.
Fresh cabinet falls and warmer air rises, so there will be a slight variation in temperature
between the cabinet top and the bottom.
IMPORTANT: When the temperature is changed, the compressor works harder to reach the
required temperature. During this time, the side panels of the cabinet can reach up to 45 ° C,
but will cool when they reach the set temperature.
CHANGING A CELSIUS FAHRENHEUT
You can select whether the temperature display shows Celsius or Fahrenheit.
To change the temperature display, press the plus button (4) for 5 seconds.
You cannot change the screen if you are in the process of adjusting the temperature.
CHARGING APPARATUS
IMPORTANT: Your appliance is ideal for storing wine bottles of 0.75 liters Bordeaux style.
While the cabinet can store larger bottles, you should make sure that they do not prevent the
door from closing properly.
