1. Overload Protection
Device disengaged to
protect the log splitter
from being damaged.
1. Contact a qualified electrician for
opening the push button box to
engage the overload protection
device inside.
Motor fails to
start.
1. Log is improperly
positioned.
2. The sizes or hardness
of the log exceeds the
capacity of the
machine.
3. Wedge cutting edge is
blunt.
4. Oil leaks.
5. Unauthorized
adjustment was made
on max. pressure
limiting screw. Lower
max pressure rating
was set.
1. Refer to "operation and use"
section for perfect log loading.
2. Reduce the log sizes before
splitting it on the log splitter.
3. Refer to "sharpening wedge"
section (page 9) to sharpen the
cutting edge.
4. Locate leak(s) and contact the
authorized service agent.
5. Contact your nearest
warranty/service agent.
Fails to split logs.
1. Lack of hydraulic oil
and excessive air in
the hydraulic system.
1. Check oil level for possible oil
refuelling.
2. Contact your nearest
warranty/service agent.
The log pusher
moves fails to
move
smoothly/makes
abnormal sounds
or vibrates
excessively
1. Air sealed in hydraulic
system whilst
operating.
2. Bleed screw is not
tightened before
moving the log
splitter.
3. Oil drain bolt with
dipstick is not tight
enough.
4. Hydraulic control valve
assembly and/or seal(s)
are worn.
1. Loosen bleed screw by 3-4
rotations before operating the log
splitter.
2. Tighten the bleed screw up before
moving the log splitter.
3. Tighten the oil drain bolt with
dipstick.
4. Contact your nearest
warranty/service agent.
Oil leaks around
cylinder ram or
from other
points.
15
5. HEALTH & SAFETY INFORMATION
5.1 GENERAL SAFETY INSTRUCTIONS FOR GARDEN TOOL USE
WARNING: Please read the following instructions carefully, failure to do so could lead to serious personal injury. When
using electric tools, basic safety precautions, including the following, should always be followed to reduce the risk of
fire, electric shock and personal injury. Read all these instructions before operating this product and save these
instructions.
IMPORTANT: Draper Tools Limited recommends that this machine should not be modified or used for any application
other than that for which it was designed. If you are unsure of its relative applications do not hesitate to contact us in
writing and we will advise you.
1. KNOW YOUR POWER TOOL: Read and understand the owner's manual and labels affixed to the tool. Learn its
application and limitations as well as the specific potential hazards peculiar to this tool.
2. KEEP WORK AREA CLEAN: Cluttered areas and benches invite accidents. Floors must not be slippery due to oil or
sawdust.
3. AVOID DANGEROUS ENVIRONMENTS: Do not use power tools in damp or wet locations, or expose them to rain.
Keep work area well lit. Provide adequate space surrounding the work area. Do not use in environments with a
potentially explosive atmosphere.
4. KEEP CHILDREN AWAY: All visitors should be kept a safe distance from work area.
5. STORED TOOLS: When not being used, all tools should be stored in a dry, locked cupboard and out of the reach of
children.
6. WEAR PROPER CLOTHING: Do not wear loose clothing, neckties or jewellery (rings, wristwatches) to catch in
moving parts. NONSLIP footwear is recommended. Wear protective hair covering to contain long hair. Roll long
sleeves above the elbow.
7. USE SAFETY GOGGLES (Head Protection): Wear CE approved safety goggles at all times. Normal spectacles only
have impact resistant lenses, they are NOT safety glasses. Also, use face or dust mask if application is dusty and ear
protectors (plugs or muffs) during extended periods of operation.
8. NOISE LEVELS: Some types of machines may have high noise levels when working. In such cases ear protection
must be worn.
9. VIBRATION LEVELS: Hand held power tools produce different vibration levels. You should always refer to the
specifications and relevant Health and Safety guide.
10. DUST EXTRACTION: If your tool is fitted with a dust extraction fitting, always ensure that it is connected and being
used with a dust extractor. Vacuum cleaners can be used if suitable for the material being extracted.
11. PROTECT YOURSELF FROM ELECTRIC SHOCK: When working with power tools, avoid contact with any earthed
items (e.g. pipes, radiators, hobs and refrigerators, etc.). If you are using a power tool in extreme conditions (e.g.
high humidity or generating metal dust), always use an RCD (residual current device) at the power socket.
12. STAY ALERT: Always watch what you are doing and use common sense. Do not operate a power tool when you are
tired or under the influence of alcohol or drugs.
13. WHEN WORKING OUT OF DOORS: Only use extension leads designed for that purpose.
14. ACCESS TO MAINS SOCKET: If a stationary machine is fitted with a moulded plug and cable, the machine should
not be positioned so that access to the mains socket is restricted.
15. DISCONNECT POWER TO THE TOOL: When not in use, before servicing and when changing accessories such as
cutters, etc.
16. AVOID ACCIDENTAL STARTING: Make sure the switch is in the OFF position before plugging the machine into the
power supply.
17. NEVER LEAVE MACHINE RUNNING UNATTENDED: Turn power off. Do not leave machine until it comes to a
complete stop.
18. DO NOT ABUSE THE CORD: Never carry the tool by the power cable or pull it from the socket. Keep the power
cable away from heat, oil and sharp edges. If the supply cord is damaged, it must be replaced by the manufacturer
or its service agent or a similarly qualified person in order to avoid hazard.
19. NEVER STAND ON TOOL: Serious injury could occur if the tool is tipped or if the cutting tool is accidentally
contacted. Do not store materials above or near the tool, so that it is necessary to stand on the tool to reach them.
20. CHECK DAMAGED PARTS: Before further use of the tool, a guard or other part that is damaged should be carefully
checked to determine that it will operate properly and perform its intended function. Check for alignment of
moving parts, free running of moving parts, breakage of parts, mounting and any other conditions that may affect
its operation. A guard or other part that is damaged should be repaired properly or replaced by an authorized
service centre unless otherwise indicated in this instruction manual. Have defective switches replaced by an
authorized service facility. Do not use the tool if the switch does not turn it on and off.
21. KEEP GUARDS IN PLACE: And in working order.
22. MAINTAIN TOOLS WITH CARE: Keep tools sharp and clean for the best and safest performance. Follow instructions
for lubricating and changing accessories. All extension cables must be checked at regular intervals and replaced if
damaged. Always keep the hand grips on the tool clean, dry and free of oil and grease.
23. USE RECOMMENDED ACCESSORIES: Consult the owners manual for recommended accessories. Follow the
instructions that accompany the accessories. The use of improper accessories may cause hazards.
24. REMOVE ADJUSTING KEYS AND WRENCHES: Form a habit of checking to see that keys and adjusting wrenches are
removed from the tool before turning it on.
6
11. TROUBLESHOOTING
TROUBLE PROBABLE CAUSE REMEDY
