Dover Hydro systems 595 Manuel utilisateur

10091940

Rev. F 4/15

595

Single Solid Dissolver

Package Should Contain:

1. Dissolution Board

2. Float

3. S-hook

4. Siphon Breaker

5. Outlet Ball Valve

6. Mounting Kit

7. Overow Fitting

8. Instruction Manual

Troubleshooting Chart:

1. System does not operate a. No water a. Open water supply

b. Clogged water inlet strainer b. Disconnect inlet water line and clean

strainer

c. Water valve failure c. Clean or replace with valve parts kit*

2. Discharge from siphon a. Failed siphon breaker a. Repair or replace siphon breaker

breaker

3. Float is not turning water a. Unit not level a. Make sure unit is level - float hangs level

flow On/Off

b. Float movement obstructed b. Make sure float movement is not

obstructed

4. Solution strength too low a. Low inlet pressure a. Adjust inlet pressure higher using

reguator 30-40psi is recommended

(Turn pressure adjustment screw

clockwise to increase pressure)

Make sure tubing is not kinked

b. Inlet tubing kinked b. Adjust tubing to prevent kinking

SolutionCause

Problem

3798 Round Bottom Road, Cincinnati, OH 45244 U.S.A. • Phone: (513) 271-8800 •Fax: (513) 271-0160 •www.hydrosystemsco.co

THANK YOU FOR YOUR INTEREST IN OUR PRODUCTS

WEAR

ALWAYS

KEEP

Please use this equipment carefully and observe all warnings andcautions.

*************************************************** NOTE ********************************************

protective clothing and eyewear when dispensing chemicals or other materials or when working in the vicinity of all chemicals,

filling or emptying equipment, or changing metering tips.

observe safety and handling instructions of the chemical manufacturer.

direct discharge away from you or other persons or into approved containers.

install solid dissolver in an area with a floor drain nearby, and connect overflow port with hose to drain.

dispense cleaners and chemicals in accordance with manufacturer's instructions. Exercise CAUTION when maintaining your

equipment.

reassemble equipment according to instruction procedures. Be sure all components are firmly screwed or latched into position.

equipment clean to maintain proper operation.

UNIT SPECIFICATIONS:

Weight: -- 15lb. Dry

-- 35lb. With full chemical bottle and full solution reservoir

Dimensions: -- 14" W X 24" H X 10" D

* Hard water may cause build-up of mineral deposits in water valve. Remove deposits by soaking the valve parts

in a deliming solution.

1. Drill holes for the four wall

anchors with a (9/32") drill,

using the mounting board as

a template. Make sure the

board is level.

2. Install the siphon breaker

by pushing the 1/4" tting on

the metal tube and the 3/8" t-

ting on the exible black tube.

3. Remove top screw from

black access panel to install

oat.

4. Install the oat on the S-

hook inside the board.

Verify oat operation is not

obstructed.

5. Connect water supply line

to the inlet ball valve push-in

tting.

6. Install the outlet ball valve

using thread sealant.

Note: Colder water temperatures result in a decrease in the chemical dissolve rate.

Continued →

DescriptionPart No.Key

1 10080320 Inlet Ball valve

2 90087019 Y-Strainer, Plastic

3 90085155 Pressure regulator/gauge

4 10097418 Water Inlet Assembly

a Inlet fitting 3/8" Guest

1 Inlet Ball Valve

b Hex Nipple, 3/8" MPT

2 Y-Strainer, 3/8"FPT

c Reducer Nipple

3 Pressure Reg./Gauge

d Adaptor 1/4MPTx3/8Gst

5 10092535 Siphon Breaker Kit

Siphon Breaker Assembly

Elbow,1/4MPTx1/4Guest

Adaptor,1/4MPTx3/8Guest

6 10092579 Solid bowl assembly

e Spray J-Tube

f Retainer Arm

g Diverter Arm

h Spring Diverter

i Solid Bowl

j Screen

k Spray Nozzle

7 10091677S J-Tube Replacement Kit

e Spray J-Tube

f Retainer Arm

h Spring Diverter

8 10097089 Ball valve, solution outlet

123

Water valve

Assembly

(see diagram and

parts list next page)

595 SOLID DISSOLVER Parts Diagram and List:

7. Connect the outlet supply

line to the outlet ball valve.

8. Use the included tting to

connect overow to drain.

9. Place chemical bottle

securely in bowl assembly.

10. Turn on water supply valve.

Adjust pressure regulator.

30-40psi is recommended.

abcd

DescriptionPart No.

1 10091931 Water Valve Replacement Assembly

a Cap, Hinged, #6-#10 PP Black (4)

b Screw, Self-tapping, Stainless Steel

c Valve / Magnet Cover

d Magnet Cover w/Yoke Holes

e Ring Magnet, Small

f Spring, Magnet Return, Hastelloy

g Screw, Plastifast w/Dorritech8 (3)

h Valve Bonnet, Plastic, White

i Armature Spring

j Armature, Round #W7301R

k Diaphragm, EPDM-1

l Valve Body, Molded Black

m Elbow, 3/8"Tube x 3/8"NPT, Pkr

n Elbow, 3/8"Tube x 1/4"NPT, Pkr

o Cap, Snap Cap, 1/4 IN, Black (2)

p Screw, 1/4-20 x 3/4, Nylon MCO (2)

q Cup, Snap Cap, 1/4 IN, White (2)

r Nut, 1/4-20 Nylon (2)

s Valve, Bracket, Molded

t Yoke, Control Valve, Hastelloy

u Float S-Hook, 2.65LG, Plastic

2 665520 Water Valve Rebuild Kit

b Screw, Self-tapping, Stainless Steel

h Valve Bonnet, Plastic, White

i Armature Spring

j Armature, Round #W7301R

k Diaphragm, EPDM-1

3 520000 Water Valve Body (no fittings)

4 10092551 Float S-Hook, 2.65LG, Plastic

5 5043-A Sand-Weighted Float

Key

Not Shown

on Picture:

595 SOLID DISSOLVER Water Valve Parts Diagram and List:

Autres manuels Dover Distributeur

Dover

Dover Hydro AccuDose Series Manuel utilisateur

Dover

Dover Hydro systems HydroChem 918 Manuel utilisateur

Dover

Dover Hydro AccuPro Manuel utilisateur

Dover

Dover Hydro AccuDose Series Manuel utilisateur

Dover

Dover Hydro AccuDose Series Manuel utilisateur

Dover

Dover Hydro AccuDose Series Manuel utilisateur

Dover

Dover Wayne Select S1 Mode d’emploi

Dover

Dover Hydro AccuPro Manuel utilisateur

Dover

Dover Hydro systems HydroChem 919 Manuel utilisateur

Dover

Dover Hydro systems 595MD Manuel utilisateur

Dover

Dover Hydro AccuPro Manuel utilisateur

Dover

Dover Wayne Helix WM048523 Manuel utilisateur

Dover

Dover Hydro AccuPro Manuel utilisateur

Dover

Dover Hydro AccuDose Series Manuel utilisateur

Dover

Dover Hydro AccuDose Series Manuel utilisateur

Dover

Dover Hydro Accumax QDV Manuel utilisateur

Dover

Dover Hydro AccuPro Manuel utilisateur

Dover

Dover Hydro AccuDose Series Manuel utilisateur

Dover

Dover HYDRO DM-500 Manuel utilisateur

Dover

Dover HYDRO EvoWash Manuel utilisateur

Manuels Distributeur populaires d'autres marques

Silver King

Silver King Majestic SK12MAJ Guide de démarrage rapide

Franke

Franke F3Dn Twin Manuel utilisateur

STIEBEL ELTRON

STIEBEL ELTRON UltraHot Plus Manuel utilisateur

DAN DRYER

DAN DRYER 282 Manuel utilisateur

Essity

Essity Tork 473208 Manuel utilisateur

CBS

CBS SD300BU-88 Guide de configuration

Sealey

Sealey MK77 Manuel utilisateur

Fluid Management

Fluid Management Accutinter 1600 Manuel utilisateur

Franke

Franke DVS SD99-010 Manuel utilisateur

Graco

Graco Dispensit 1053-10C Guide de dépannage

ITALTINTO

ITALTINTO i50 Manuel utilisateur

Coca-Cola

Coca-Cola FREESTYLE 9000 Manuel utilisateur

Graco

Graco ProMix 2KE Mode d’emploi

TECHCON SYSTEMS

TECHCON SYSTEMS TS1251 Manuel utilisateur

Wayne

Wayne GLOBAL VISTA CNG Manuel utilisateur

clarsen

clarsen H133 Manuel utilisateur

PicoBrew

PicoBrew Zymatic Manuel utilisateur

BOWMAN

BOWMAN BP-007 Manuel utilisateur