Double Dome PTZPZ9 Manuel utilisateur
PTZPZ9
Intelligent Integrated IR High Speed Dome
Installation Manual
Version：V1：00
Before using the product, please carefully read the
manual and the maintenance of this manual for future use
The products factory serial number will be stamp
on the bottom and the back. Please fill the factory
serial num ber i n the bl ank s pace be low, a nd
properly preserve this statement in order to check
when necessary.
Style number:
Factory serial number: ___________________
The flashing arrow in the symbol is used to remind
the user, the large non-insulated "dangerous
voltage" near will produce an electric shock on the
human body.
The notice mark used to remind the users all the
instructions for important operation and
maintenance on this product.
Content
Safety Announcement .............................................................................. 1
Attentions ................................................................................................ 2
Functions and Features ............................................................................ 3
Special Use for Preset Point .................................................................... 4
Bracket Installment Size .......................................................................... 5
Installing Preparation ............................................................................... 6
Installation Steps ...................................................................................... 7
Dome Setting ........................................................................................... 8
DIP Switch Settings ............................................................................... 10
Basic Function Operation Settings ........................................................ 15
Power-on Self Test Display ........................................................... 15
Basic Functions for Menu and Keyboard ...................................... 15
Menu Hint ...................................................................................... 17
Main Menu Function Setting ......................................................... 18
System Setting ............................................................................... 18
Camera Parameter .......................................................................... 21
Pantilt Setting ................................................................................ 32
Information Display Figuration ..................................................... 41
Alarms setup .................................................................................. 42
Technical Specifications ........................................................................ 46
Fault Analysis ........................................................................................ 47
Appendix 1 Lighting-proof, with Surge-protector ................................. 48
Appendix 2 RS485 Bus Common Sense ............................................... 49
Appendix 3 DC12V Line and Transmission Distance Table .................... 50
1
Safety Announcement
1. Please read the manual carefully before the installation;
2. Shall be subject to all the warnings；
3. Shall comply with all instructions and the manual;
4. To avoid failure, please use the recommended accessories;
5. Use the indicated power supply line and voltage；if the location of
power and voltage is not clear, please contact with the dealer；
6. To prevent electric shocks, do not separate screws or housing. The
professionals must prepare all the component of the machine. As
for the maintenance, qualified experts should carry it out.
7. Do not use it as you like, to avoid striking and shocking, be sure to
use or store it appropriately.
8. Please use dry and soft cloth to clean it when it is dirty. If seriously
dirty, please use moderate detergent. Pay more attention to its
appearance while cleaning and erase the remains.
9. Please contact with the sales on the bellow conditions:
a) Power, control line damaged
b) Dropped or cover damaged
c) Abnormal performance
d) Can’t work according to the manual instruction
e) Damp or fall into water
f) Camera image interference
g) Out-cover damaged
10. Please use the same function parts or components provided by the
sale while replacing to prevent damage；
2
Attentions
1. Don’t expose the camera to rain or moisture (except outdoor
used model)
It is designed inside of the house, so be sure to avoid rain and moisture.
Turn off the power supply and maintain it by qualified person. The
moisture may affect the cameras and lead to electric risk..
2. Don’t aim at the sun
Be sure not to aim it at the sun or any other bright objects, whether in
use or not. Alternatively, it may cause the picture unclear.
3. Avoid exposing it to the light source or hard light too long
If the facular appears on the screen due to the light source, the image
may fade to some extent.
4. Avoid installing it reversely
It’s designed for ceiling or wall mount. So if installed upside down, such
as installing on the floor, it may cause it out of order.
5. Please use it according to the required temperature and
humidity
Don’t use it under the circumstance of high temperature or humidity.
Leave it away from heat-generating equipments, such as warm vapor,
stove and so on.
6. Placing it away from air-conditioner’s entrance point
The lens may generate fog due to the water condensing under the
following circumstance:
a) Quick changes from high to low temperature caused by
opening/closing the door occasionally
b) Used where the glasses can generates fog.
c) Used in the house full of smog or dust.
If the lens covered with fog generated by water condensing, put the
cover down and clean the appearance with a piece of soft cloth.
7. Consumer Goods
Some components, such as lens drive motor, cooling fan motor, built-in
sliding loop may be wear out due to long-term using. Concerning its
update and maintenance, please consult to maintenance center.
8. Don’t make it point to the same object too long
If so, the object’s shadow will appear on the screen.
3
Functions and Features
1. Built-in decoder
Digital design, data will not be lost while power fails.
With recovery, function while turning on the users can run it as you
like.
Support 200 presets, 4 preset patrolling scanning routes, each
contains 32 presets, and the presets’ can be separately programmed.
4 patterns, each can be recorded for 1000 different running track,,
including P/T or lens’ operation and camera control.
Support 4-auto scan.
Soft and hard ID setting can be edited on the DIP switch and inner
menu.
Integrated multi-protocol control: P ELCO“P”, PELCO“D”.
4 ch alarm input; 2 ch assisting output. Can satisfy practical needs.
Support auto leisure function.
Support 8 privacy zones setting in maximum.
Proportional zoom lens, P/T speed and depth of zoom lens will
decrease in proportion.
2. Integrated assembling design, built-in P/T
Inside / outside various installment methods.
Horizontally controlling speed 0.5º-240º/s.
Vertically controlling speed 0.5º-147º/s.
360º continuously horizontal rotation, all-direction monitor.
Comply with IP 66/CE standard.
Built-in surge protection device
3. Built-in zoom lens, integrated digital color camera of high
sensitivity and Resolution
Many high-resolution cameras of various models provided by
different manufacturers can be available.
Auto focus, manual priority.
Auto iris .
4
Auto shift from C-W/B.
4. Built-in OSD Menu
Built-in multi-functional video OSD, functional parameters of
cameras and P/T function can be settable, with easy operation.
Set 20 main subjects display.
Built-in direction display.
Built-in dome’s temperature display.
Special Use for Preset Point
Call 95 PRESET（95+PRESET）―― Enter into main menu
Call 96 PRESET（96+PRESET）――Pattern scanning 1
Call 97 PRESET（97+PRESET）――Line scanning for preset point 1
Call 99 PRESET（99+PRESET）――Auto scanning
5
Bracket Installment Size (mm)
IR High Speed Dome Dimension (picture 1)
Wall Mount Dimension (picture 2)
Picture 2
Picture 1
6
Installing Preparation
1. Basic Requirement
All electrical work must comply with the latest electrical regulations,
fire regulations and relevant laws and regulations;
In accordance with the packing list to check if the parts are completed
or not, determine the sites and installation applications with the required
match, if not, please contact the supplier;
Use this product under the required working environment.
2. Check the Hardness of the Installation Space and Place
To confirm the installation location has sufficient space to
accommodate the installation of this product and its structure;
Confirmed the ceiling, walls, brackets must be able to support the
installation of the dome and the total weight of the structure.
Requiring a 4-fold safety factor.
3. Preparatory for the Cable
Select the desired cable according to the transmission distance. Video
coaxial cable minimum specifications: (1) 75Ω impedance; (2) Full
copper wire; (3) 95% braided copper shielding network.
Internal
style
International
style
Maximum distance
（feet\meter）
RG59/U
RG59/U
760ft (229m)
5C-2V RG6/U 1,000ft (506m)
7C-2V
RG11/U
1,500ft (457m)
4. Save All the Packing Material
Please keep the original packaging material, when problems occur, can
use it to send back to manufacturers or agents. Non-original packing
materials may lead to accidental damage in transit and result in
additional cost.
7
Installation Steps
1. Wall Mount Installation Steps:
1） 4 position for digging hole on the wall and install expansion scre
（as picture 3）
2） Make the cover parts guide line through the bracket to the wall
bracket, and fix the M5*10 screw（gasket）， then Fix the installed
wall parts on the ceiling and Lock nut.（as picture 4）
Picture 3
Picture 4
Table des matières
