Dormakaba 2725-K6 Manuel utilisateur

dormakaba c-lever compact

HBC

08/2017

Technical Manual

dormakaba Schweiz AG

Hofwisenstrasse 24

8153 Rümlang

Switzerland

T: +41 (0)44 818 93 11

www.dormakaba.com

dormakaba Schweiz AG

Mühlebühlstrasse 23

8620 Wetzikon

Switzerland

T: +41 (0)44 931 61 11

www.dormakaba.com

dormakaba EAD GmbH

Albertistrasse 3

78056 Villingen-Schwenningen

Germany

T: +49 7720 60 30

www.dormakaba.com

Registered in: Heiligenhaus

No part of this document may be reproduced or used in any form or by any means without prior written permis-

sion of dormakaba Schweiz AG.

All names and logos of third-party products and services are the property of their respective owners.

Subject to technical changes.

08/2017

Technical Manual

308/2017 dormakaba c-lever compact

1 About this document 5

1.1 Target group 5

1.2 Validity 5

1.3 Contents and purpose 5

1.4 Supplementary documentation 5

1.5 Abbreviations/definition of terms 7

1.6 Hazard categories 8

1.7 Notes 8

1.8 Symbols 8

2 Basic safety instructions 9

2.1 Designated use 9

2.2 Product changes 9

2.3 ESD prevention measures 9

2.4 Handling of lithium batteries 10

2.5 Dealing with powerful magnets 10

3 Product description 11

3.1 Overview 11

3.2 Structure 11

3.3 Scope of delivery 12

3.4 Technical data 12

3.4.1 Dimensions 14

3.4.2 Conformity 14

4 Installation 15

4.1 Check minimum distance 15

4.2 Drilling fixing holes 15

4.3 Inserting the battery holder 16

4.4 Additional torsion lock 16

4.5 Securing the battery holder more tightly 17

4.6 Mounting the outside lever handle 17

4.7 Mounting the spindle 18

4.8 Inserting the c-lever into the lock 18

4.9 Mounting the inside rosette and lever handle 18

4.10 Removing the protective film 19

4.11 Switch off 'Bolt Recreation Time' 19

4.12 Dismantling 20

4.12.1 Dismantling the inside rosette and lever handle 20

4.12.2 Removing the inside lever handle from the rosette 20

4.12.3 Removing the c-lever from the lock 20

4.12.4 Removing the battery holder locking screw 20

4.12.5 Removing the outside lever handle 20

5 Programming 21

5.1 Initial programming of MRD components 21

5.2 Master media 21

5.3 User media 21

5.4 Program structures 22

5.5 A/B and B structures 22

5.6 Programming user media with B masters 23

5.7 Deleting individual user media 24

5.8 Deleting individual B masters 25

5.9 Deleting all user media 26

Technical Manual

4 08/2017dormakaba c-lever compact

5.10 INI reset with master media for whitelist and CardLink™ 27

6 Operation 29

6.1 Opening with user media 29

7 Maintenance 30

7.1 Maintenance table 30

7.2 Cleaning 30

8 Service 31

8.1 Replacing the batteries 31

8.2 Connecting the programmer 32

8.3 Configuration and traceback 32

9 Troubleshooting 33

9.1 Error analysis 33

10 Disposal / dismantling 34

10.1 Decommissioning / dismantling 34

10.2 Disposal 34

11 Packaging/return 35

11.1 Complete devices 35

11.2 Electronic component assemblies 35

About this documentTechnical Manual

508/2017 dormakaba c-lever compact

1 About this document

This section contains information for the proper use of this document.

1.1 Target group

This quick start guide is intended for skilled persons only.

The descriptions are intended for skilled persons trained by the manufacturer. The descrip-

tions are no replacement for product training.

For reasons of equipment safety, the installation, maintenance and service measures de-

scribed in this documentation should only be carried out by skilled persons in accordance with

EN 62368-1 (Audio/Video, Information and Communication Technology Equipment – Part 1:

Safety Requirements).

Skilled person is the designation for people who have the appropriate technical training and

experience in setting up the equipment. Skilled persons are expected to use their training and

experience to identify any risks to themselves and others that may arise while carrying out

these activities, and to minimise these risks as far as possible. It is the skilled person’s re-

sponsibility to ensure that the conditions stated by the manufacturer and the applicable regu-

lations and standards are complied with when carrying out these actions.

This documentation is also used to provide information for persons with the following tasks:

• Project planning and project implementation

• Commissioning the product within the network

• Connecting the product to user software by programming customer applications

• Customer-specific adjustments with product parametrisation

1.2 Validity

This document describes the product:

Product designation: c-lever compact

Types: 2724-K6

2725-K6

Article numbers and vari-

ants: 2725-K6 c-lever compact, standard

2724-K6 c-lever compact, half

This document describes all product versions and all optional features and functions. Options

are subject to a charge and therefore only available if purchased.

1.3 Contents and purpose

The contents of these instructions are limited to the installation, operation, maintenance and

servicing of the product.

1.4 Supplementary documentation

The following documents are available from the sales partners:

• Operating manual programmer 1460

About this document Technical Manual

6 08/2017dormakaba c-lever compact

• User manual for programming and signals of the Kaba evolo components

• System description Kaba evolo

• Planning guideline wireless

• Documentation for currently installed system software

About this documentTechnical Manual

708/2017 dormakaba c-lever compact

1.5 Abbreviations/definition of terms

To make this document easier to read, the following short designations are used for the

product designations, as well as the following symbols:

Short designation Product designation

c-lever c-lever compact

evolo component c-lever compact

Programmer Programmer 1460

S-module S-module for c-lever

KEM Kaba evolo Manager

MRD Multi RFID device

Symbols

Acoustic signal

Visual signal

About this document Technical Manual

8 08/2017dormakaba c-lever compact

1.6 Hazard categories

Instructions with information on what to do and not to do to prevent injury and material

damage are denoted specially.

Please follow all hazard instructions. These are intended to help prevent accidents and pre-

vent damage.

These instructions are divided into the following categories:

CAUTION

Low risk

Denotes a potentially dangerous situation that could lead to minor injury.

NOTICE

Important information on the correct use of the product.

Failure to comply with these instructions could lead to malfunctions. The product and/or ob-

jects in the local vicinity could be damaged.

1.7 Notes

Information is denoted by this symbol.

Tips on using the product are useful pieces of information.

They help to make best use of the product and its functions.

1.8 Symbols

Symbols with the following meanings are used for hazards (depending on hazard source.)

General hazard Hazard from electric shock

Risk of explosion Risk to electronic components from

electrostatic discharge

Basic safety instructionsTechnical Manual

908/2017 dormakaba c-lever compact

2 Basic safety instructions

This product has been built to state-of-the-art standards and in line with established safety

regulations. However, hazards for persons and property may arise when handling the product.

Read and observe the following safety instructions before using the product.

2.1 Designated use

This product is intended for use as specified and explained in the Product description section

only. Any other use is considered non-designated use. The manufacturer is not liable for any

damage or injury due to non-designated use. The user/facility operator is the sole person to

bear risks for non-designated use.

2.2 Product changes

NOTICE

No changes should be made to the product, unless in accordance with changes described in

the instructions.

2.3 ESD prevention measures

NOTICE

Risk for electronic components due to electrostatic discharge.

Incorrect handling of electronic PCBs or components can result in damage which will cause a

complete breakdown or sporadic errors.

• General ESD prevention measures must be observed when installing or repairing the

product.

• Wear an anti-static wrist strap when handling electronic components. Connect the end of

the strap to a discharge box or a non-painted, earthed metal component. This way, static

discharges are channelled away from your body safely and effectively.

• Handle a PCB along its edges only. Do not touch the PCB or connectors.

• Place dismantled components on an anti-static surface or in an anti-static shielded con-

tainer.

• Avoid contact between PCBs and clothing. The wrist strap protects PCBs against an elec-

trostatic discharge voltage from the body only. However, damage can also be caused by

an electrostatic discharge voltage from clothing.

• Transport and ship dismantled modules in conductive anti-static bags only.

Basic safety instructions Technical Manual

10 08/2017dormakaba c-lever compact

2.4 Handling of lithium batteries

NOTICE

Lithium batteries can explode or burst explosively.

Improper handling of lithium batteries can lead to fires and explosions.

• Only replace lithium batteries with batteries of the same type.

• Do not open, drill through or squash lithium batteries.

• Do not burn lithium batteries or expose them to high temperatures.

• Do not short circuit lithium batteries.

• Do not recharge lithium batteries.

2.5 Dealing with powerful magnets

WARNING

Magnets can affect the functionality of pacemakers and implanted defibrillators.

The functions of pacemakers or implanted defibrillators may be impaired.

Pacemakers may be inadvertently switched to test mode, causing those who wear them to

feel unwell.

• People wearing such devices should maintain an appropriate distance from magnets.

• People wearing such devices should be warned before approaching magnets.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Dormakaba Verrouillage

Dormakaba

Dormakaba STV 1 Series Manuel utilisateur

Dormakaba

Dormakaba YD30 Series Manuel

Dormakaba

Dormakaba AUDITCON 2 SERIES Manuel utilisateur

Dormakaba

Dormakaba M Series Manuel utilisateur

Dormakaba

Dormakaba LA GARD 700 Series Manuel utilisateur

Dormakaba

Dormakaba 5715 Instructions d'utilisation et d'entretien

Dormakaba

Dormakaba GL220 Manuel utilisateur

Dormakaba

Dormakaba ORACODE 480 Series Manuel utilisateur

Dormakaba

Dormakaba ORACODE 660i Manuel utilisateur

Dormakaba

Dormakaba T900 Manuel utilisateur

Dormakaba

Dormakaba SL30DBL Cobalt Double Manuel utilisateur

Dormakaba

Dormakaba La Gard Reset Box Manuel utilisateur

Dormakaba

Dormakaba 79 Series Instructions de montage

Dormakaba

Dormakaba SafeRoute-System Mini Manuel utilisateur

Dormakaba

Dormakaba STV 2 Series Manuel utilisateur

Dormakaba

Dormakaba BEST Wi-Q 45HQ Manuel utilisateur

Dormakaba

Dormakaba UNIVERSAL Light US 10 Manuel utilisateur

Dormakaba

Dormakaba GL10 Manuel utilisateur

Dormakaba

Dormakaba Axessor Series Manuel utilisateur

Dormakaba

Dormakaba SVI 5000 Manuel de formation

Dormakaba

Dormakaba Classic Manuel utilisateur

Dormakaba

Dormakaba Axessor CIT Manuel utilisateur

Dormakaba

Dormakaba RCI 3513-DM Manuel utilisateur

Dormakaba

Dormakaba LA GARD ComboGard Pro 39E Manuel

Manuels Verrouillage populaires d'autres marques

Magic

Magic 105 Manuel utilisateur

Gantner

Gantner GAT NET.Lock 7020 System Guide rapide

Wittkopp

Wittkopp Insys 7202 Manuel utilisateur

Dorma

Dorma Studio Classic Manuel utilisateur

Securam

Securam ECSL-601 Manuel utilisateur

Sudhaus

Sudhaus 3003 Manuel utilisateur

Safety 1st

Safety 1st 48517 Manuel utilisateur

Pado

Pado FDS-10 Manuel utilisateur

Esco

Esco systeQ Series Manuel utilisateur

COMPX

COMPX National D8951 Manuel utilisateur

secureo

secureo Key Box Manuel utilisateur

Stock Loks

Stock Loks C8713 Manuel utilisateur

COMPX

COMPX 1T-058 Manuel du propriétaire

Auslock

Auslock T11 Manuel utilisateur

ELCOM

ELCOM 7205 Manuel utilisateur

Stealth SAFES

Stealth SAFES ShadowVault Manuel utilisateur

Knox

Knox KeySecure 5 Manuel utilisateur

Kwikset

Kwikset 48334/01 Manuel utilisateur