DoorBird D10x Series Manuel utilisateur

VERSION ., MIN. HW .

Page 1-19

Installation Manual

IP Video Door Station

D10x Series

Seite 20-39

Installationsanleitung

IP Video Türstation

D10x Serie

Page 40-58

Manuel d´installation

Interphone vidéo IP

Série D10x

D10X

INSTALLATION MANUAL

Read these instructions carefully before starting to use any components.

Keep the manual so you can refer to it at a later date if required. If you hand

over the device to other persons for use, please hand over the operating

manual as well.

You can always ﬁnd the most up-to-date version of the installation manual

on www.doorbird.com/support

To make things easier we use the term “device” for the product “IP Video

Door Station” and “mobile device” for a smartphone or tablet.

Liability

Every care has been taken in the preparation of this document.

Please inform Bird Home Automation GmbH of any inaccuracies or omissions.

Bird Home Automation GmbH cannot be held responsible for any technical

or typographical errors and reserves the right to make changes to the product

and manuals without prior notice. Bird Home Automation GmbH makes no

warranty of any kind with regard to the content of this document, including,

but not limited to, the implied warranties of merchantability and ﬁtness for

a particular purpose. Bird Home Automation GmbH shall neither be liable

nor responsible for incidental or consequential damages in connection with

the furnishing, performance or use of this material. This product is only to

be used for its intended purpose.

Equipment Modiﬁcations

This equipment must be installed and used in strict accordance with the

instructions given in the user documentation. This equipment contains no

components that require service by the user. Unauthorized equipment

changes or modiﬁcations will invalidate all applicable regulatory certiﬁcations

and approvals.

Symbols used

Caution: Indicates a hazardous situation which, if not avoided,

could result in minor or moderate injury.

Danger: Indicates a hazardous situation which, if not avoided,

will result in death or serious injury.

Warning: Indicates a hazardous situation which, if not avoided,

could result in death or serious injury.

ENGLISHENGLISH

Notice: Indicates a situation which, if not avoided, could result

in damage to property.

Note: Indicates useful information which helps in getting the

most out of the product.

NOTICE

Hazard information

• Mounting, installation and servicing work on electrical devices may

only be performed by a qualiﬁed eletrician. Failure to observe this

regulation could result in the risk of serious damage to health or fatal

injury due to electric shocks.

• Devices with 110-240 V connection: The device may only be connected

to an easily accessible power socket outlet. The mains adapter must

be pulled out if a hazard occurs.

• For power supply, only use the original plug-in mains adapter

delivered with the device or a recommended PoE-Switch/PoE-Injector

as speciﬁed in this manual.

• Because of electrostatic charging, direct contact with the circuit board

can result in destruction of the device. Direct contact with the circuit

board must therefore be avoided at any time.

• Observe the EN 60065 resp. EN 60950 resp. EN 62368 standard.

• Do not use the device if there are signs of damage to the housing,

control elements or connecting sockets, for example, or if it

demonstrates a malfunction. If you have any doubts, please have

the device checked by an authorized expert.

• Do not open the device. This voids the warranty of the device. The

device does not contain any parts that can be maintained by the

user. In the event of an error, please have the device checked by an

authorized expert.

• For safety, approval and licensing reasons (CE/FCC/IC etc.),

unauthorized change and/or modiﬁcation of the device is not

permitted.

• The device is not a toy; do not allow children to play with it. Do not

WARNING

Important: Indicates signiﬁcant information which is essential

for the product to function correctly.

leave packaging material lying around. Plastic ﬁlms/bags, pieces of

polystyrene, etc. can be dangerous in the hands of a child.

• Always lay cables in such a way that they do not become a risk to

people and domestic animals.

• Voltage is applied to parts within the equipment. Do not touch any

parts that are not associated with the installation, wiring, or connection.

Electric shock could result.

• On devices which are not marked as weather-proof: Keep the device

away from water or any other liquid.

• Do not install or make any wire terminations while power supply is

plugged in. It can cause eletric shock or damage to the device.

• Before turning on power, make sure wires are not crossed or shorted. If

not, ﬁre or eletric shock could result.

• High voltage may be present internally. Do not open the device.

Electric shock could result.

• The device is not of explosion-proof. Do not install or use near gases or

ﬂammable materials. Fire or explosion could result.

• Do not install two power supplies in parallel to a single input. Fire or

damage to the device could result. Be sure to connect a single power

supply to the device.

• Do not connect any terminal on the device to an AC power line. Fire or

electric shock could result.

• Keep AC cord from being marred or crushed. If the AC cord is fractured,

ﬁre or electric shock could result.

• Do not plug or unplug with wet hands. Electric shock could result.

• Do not put any metal or ﬂammable material into the device. Fire,

electric shock, or device trouble could result.

• Existing wiring may contain high voltage AC electricity. Damage to the

device or electric shock could result. Wiring and installation must be

done by a qualiﬁed eletrician.

•When mounting the device on a wall or ceiling, install the device in a

convenient location, but not where it could be jarred or bumped. Injury

could result.

• On devices with ground terminals, connect to an earth ground.

Otherwise ﬁre or malfunction could result.

• On devices with plastic or real glass, do not put high pressure on the

WARNING

ENGLISHENGLISH

glass. If fractured, injury could result.

• On devices with LCD, if LCD is punctured, do not allow contact with the

liquid crystal inside. Injury could result. If necessary, gargle your mouth

and clean your eyes or skin with clear water for at least 15 minutes and

consult your doctor.

• Do not put anything on the device or cover the device with cloth,

silicone, glue, coating, separate covering etc. Fire or device issues could

result.

• Do not install the device in any of the following locations. Fire, electric

shock, or device trouble could result.

 Places under direct sunlight or places near heating equipment that

varies in temperature.

 Places subject to dust, oil, chemicals, hydrogen sulﬁde (hot spring).

 Places subject to moisture and humidity extremes, such as bathrooms,

cellars, greenhouses, etc.

 Places where the temperature is very low, such as inside a refrigerated

area or in front of an air conditioner.

 Places subject to steam or smoke (e.g. near heating or cooking surfaces).

 Where noise generating devices such as dimmer switches or inverter

electrical appliances are closeby.

 Locations subject to frequent vibration or impact.

• On devices with intercom, be sure to perform a call test with low audio

volume on both intercom devices. A sudden call etc. may arrive causing

for example damage to your ear.

• If the device does not operate properly, unplug the power supply.

• All devices which are not marked as weather-proof are designed for

indoor use only. Do not use outdoor.

• On devices which are marked weather-proof: Do not spray with high-

pressure water. Device issues could result.

• We do not assume any liability for damage to property or personal injury

caused by improper use or the failure to observe the

• hazard information. In such cases, any claim under warranty ceases. For

consequential damages, we assume no liability!

Safety instructions

• The device shall be used in compliance with local laws and regulations.

• Store the device in a dry and ventilated environment.

• Avoid exposing the device to shocks or heavy pressure.

• Do not install the device on unstable brackets, surfaces or walls. Make

sure the material is strong enough to support the weight of the device.

• Use only applicable tools when installing the device. Using excessive

force with tools could cause damage to the device.

• Do not use chemicals, caustic agents, or aerosol cleaners.

• Use a clean dry cloth for cleaning.

• Use only accessories that comply with technical speciﬁcation of the

device. These can be provided by Bird Home Automation GmbH.

• Use only spare parts provided by or recommended by Bird Home

Automation GmbH.

• Do not attempt to repair the device by yourself. Contact Bird Home

Automation GmbH for service matters.

• Keep the device more than 1 m (3.3‘) away from microwave, radio, TV,

wireless router and any other wireless devices.

• On devices with intercom or built-in speaker or built-in microphone or

signal transmission functions, keep the wires more than 30 cm (12‘‘)

away from AC 100-240 V wiring. AC induced noise and/or device

malfunction could result.

• Install the device in an area that will be accessible for future inspections,

repairs and maintenance.

• If the device is used close to a cellular phone, the device may malfunction.

• The device can be damaged if dropped. Handle with care.

• The device turns inoperative during power failure.

• On devices with intercom or built-in speaker or built-in microphone,

in areas where cellular or Radio / TV broadcasting station antennas are

closeby, the device may be affected by radio frequency interference.

• On devices with LCD screen, it must be noted in advance that the LCD

panel, though manufactured with very high precision techniques,

inevitably will have a very small portion of its picture elements always lit

or not lit at all. This is not considered a device malfunction.

NOTICE

ENGLISHENGLISH

• On devices with intercom, due to the environmental sound around

the device, it may hinder smooth communication, but this is not a

malfunction.

• On devices with Username/Password, the Username/Password to access

the device is the customer‘s responsibility. Make sure to use a password

that cannot be easily guessed by a third party. We recommend that

you change the Password on a regular basis.

• We will, under no circumstances, be liable for damage that occurs due

to failures in power supply, network equipment or terminal devices;

failures due to Internet providers and cellular network providers; failures

such as disconnected lines and other losses in communication, which

makes it impossible to provide this service as well as in any way delay

this service due to any other causes outside of our responsibility; or if an

error or missing data occurs during transmission.

Information on disposal for users of waste electrical & electronic

equipment (private household)

This symbol on the products and/or accompanying documents means that

used electrical and electronic products should not be mixed with general

household waste. For proper treatment, recovery and recycling, please take

these products to designated collection points, where they will be accepted

an a free of charge basis. Alternatively, in some countries you may be able to

return your products to your local retailer upon the purchase of an equivalent

new product. Disposing of this product correctly will help to save valuable

resources and prevent any potential negative effects on human health and

the environment which could otherwise arise from inappropriate waste

handling. Please contact your local authority for further details of your nearest

designated collection point. Penalties may be applicable for incorrect disposal

of this waste, in accordance with national legislation.

Information on disposal in other countries outside the European Union

This symbol is only valid in the European Union. If you wish to discard this

product, please contact your local authorities or dealer and ask for the correct

method of disposal.

COMPONENTS

Contents

∙ 1x DoorBird Video Door Station

∙ 1x Power supply unit (mains adaptor) with four country-speciﬁc adaptors

∙ 1x Cable with plug for the power supply (black, red)

∙ 1x Cable with plug and RJ45 jack for the network cable (white-orange,

orange, white-green, green)

∙ 1x Cable with plug for the network cable (white-orange, orange,

white-green, green), alternatively to the cable with plug and RJ45 jack

∙ 1x Cable with plug for the electric door opener (purple, purple)

∙ 1x Cable with plug for the electric door chime (blue, blue)

∙ 1x Cable with plug for the door-opening button (yellow, yellow)

∙ Several crimp connectors

∙ 4x Phillips countersunk head screws for the wall mounting plate, long

∙ 4x Phillips countersunk head screws for the wall mounting plate, short

∙ 4x Dowels

∙ 1x Safety screw

∙ 1x Screwing-tool for the safety screw

∙ 1x Wall mounting plate with sealing ring (installation on wall surface)

∙ 1x Installation manual

∙ 1x Quickstart guide

Warranty Information

For information about the device warranty, see www.doorbird.com/warranty

Transportation

When transporting the device, use the original packaging or

equivalent to prevent damage to the device.

NOTICE

ENGLISHENGLISH

VIDEOS

Need help with the installation? Be sure to watch our installation videos

which can be found on http://www.doorbird.com/support

Each individual step of the installation is clearly documented in the videos.

Video door station

1) Night vision

Extra bright infra-red LEDs, effective

during the hours of darkness

(infra-red light invisible to the

human eye, 850 nm)

2) HDTV video

Ultra wide-angle hemispheric

lens, 180°

3) Loudspeaker

Large-sized and speech enhanced

broadband speaker

4) Motion sensor

180° Infrared motion sensor

for alarms

5) Stainless-Steel Button

With illuminated LED ring (at night),

also acts as Diagnostic-LED

6) Microphone

With active noise cancellation

7) Light sensor

For the night-vision mode

8) Locking positions

For the mounting plate

9) Connection terminal

For the power supply,

door chime, etc.

10) Screw opening

For the safety screw

Night vision

HDTV video

Loudspeaker

Motion sensor

Stainless-Steel

Button

Microphone

Light sensor

backfront

1 8

INSTALLATION

All steps below should be carried out carefully by a competent adult, taking

into consideration any applicable safety regulations. Should you have any

questions, please contact us or a competent specialist directly. Please ensure

that all wires used for the installation are undamaged along their entire

length and approved for this type of use.

Network speed and network components

Please ensure that the upload speed of your Internet connection is at least

0.5 Mbps. You can also carry out a speed test at any time via the DoorBird

app. The user experience is only as good as your network speed, network sta-

bility and quality of your network components, such as your Internet router

and WiFi access points or WiFi repeaters. Please also make sure that your net-

work components are no older than two years old, have been manufactured

by a well-known manufacturer, and have the latest firmware installed.

Should these requirements not be fulfilled, it may happen, for example that

the performance of audio and video is poor or push notifications are delayed

or do not arrive on your smartphone or tablet at all.

High-speed Internet (via landline): DSL, cable or optical fibre

Network: 802.11b/g/n 2.4 GHz or Ethernet, with DHCP

STEP 1: SWITCHING OFF POWER

Switch off the power to all wires leading to the assembly location, i.e. the

door chime, electric door opener, power supply unit for the video door

station etc..

STEP 2: DISMANTLING THE EXISTING DOORBELL

Should there already be a doorbell on the exterior wall of the house, please

dismantle it.

STEP 3: DETERMINING THE ASSEMBLY LOCATION

The video door station uses an ultra wide-angle hemispheric lens so that

even when the person is a minimum distance of 50 cm (19.68 inches) away

from the video door station, a low installation height is sufficient. The lens is

therefore not mechanically adjustable. The camera lens should be located

at an altitude of at least 145 cm (57 inches). You may check this prior to the

final mounting. Press the mounting plate against the wall at the desired

installation site and mark the boreholes with a pencil. Remove the mounting

plate again. Ensure that no cables are to be found in the wall behind

the boreholes.

Autres manuels pour D10x Series

Table des matières

Langues :

Autres manuels DoorBird Système d'interphone

DoorBird

DoorBird A1101 Series Manuel utilisateur

DoorBird

DoorBird D21 Series Manuel utilisateur

DoorBird

DoorBird D1812 Series Manuel utilisateur

DoorBird

DoorBird D2107V Manuel utilisateur

DoorBird

DoorBird D11 Series Manuel utilisateur

DoorBird

DoorBird D10 Series Manuel utilisateur

DoorBird

DoorBird D1102KV Manuel utilisateur

DoorBird

DoorBird D21 Series Manuel utilisateur

DoorBird

DoorBird A1101 Series Manuel utilisateur

DoorBird

DoorBird D21 Series Manuel utilisateur

DoorBird

DoorBird D21 Series Manuel utilisateur

DoorBird

DoorBird D1101V-F Manuel utilisateur

DoorBird

DoorBird D11 Series Manuel utilisateur

DoorBird

DoorBird A1061W Manuel utilisateur

DoorBird

DoorBird D20x Series Manuel utilisateur

DoorBird

DoorBird D21x Series Manuel utilisateur

DoorBird

DoorBird D21 Series Manuel utilisateur

DoorBird

DoorBird D11x Series Manuel utilisateur

DoorBird

DoorBird D21 Series Manuel utilisateur

DoorBird

DoorBird D210 V Series Manuel utilisateur

DoorBird

DoorBird D21 Series Manuel utilisateur

DoorBird

DoorBird D21 Series Manuel utilisateur

DoorBird

DoorBird D21 Series Manuel utilisateur

DoorBird

DoorBird D21DKV Manuel utilisateur

Manuels Système d'interphone populaires d'autres marques

Bticino

Bticino LINEA 3000 Manuel utilisateur

MSI

MSI MSI-140 Manuel utilisateur

golmar

golmar Stadio Plus Manuel utilisateur

CyberData

CyberData 011211 series Manuel

Vidos

Vidos duo M1021 Manuel utilisateur

Vimar

Vimar ELVOX 7539/E Manuel utilisateur

SSS Siedle

SSS Siedle BTSV 850-03 Manuel utilisateur

Dahua

Dahua VTO Series Manuel utilisateur

Elvox

Elvox 5651 Manuel utilisateur

Videx

Videx VIDEOKIT Series Manuel utilisateur

Rocom

Rocom Doortello Business FW T2.05W2.04 Manuel utilisateur

Viking

Viking E-35-EWP Manuel utilisateur

Safeguard Supply

Safeguard Supply LRA-EX1000 Manuel utilisateur

SSS Siedle

SSS Siedle BFCV 850 Series Manuel utilisateur

GRD

GRD MAX V2 Manuel utilisateur

Alecto

Alecto ADI-250 Manuel utilisateur

Aiphone

Aiphone IE-8MD Manuel utilisateur

Perel

Perel EDB4 Manuel utilisateur