Dometic WDCVL Manuel

This product is designed solely for use in

recreational vehicles or other mobile equipment.

LaGrange, IN 46761

WASHER / DRYER COMBO VENTLESS

MODEL WDCVL(XX)

USA

SERVICE OFFICE

Dometic Corporation

1120 North Main Street

Elkhart, IN 46514

CANADA

Dometic Corporation

46 Zatonski, Unit 3

Brantford, ON N3T 5L8

CANADA

SERVICE CENTER &

DEALERLOCATIONS

Please Visit:

www.eDometic.com

INSTALLATION & OPERATING

INSTRUCTIONS

Read these instructions carefully. These

instructions MUST stay with this product.

This product is designed solely for use in

recreational vehicles or other mobile equipment.

REVISION E

16138100A 13262 10/16

@2016 Dometic Corporation

Elkhart, IN 46514

TABLE OF CONTENTS

INTRODUCTION....................................................................................................................................................................2

DOCUMENT SYMBOLS ........................................................................................................................................................2

IMPORTANT SAFETY INSTRUCTIONS................................................................................................................................3

A. Recognize Safety Information ...................................................................................................................................3

B. Understand Signal Words..........................................................................................................................................3

C. State of California Proposition 65 Warnings ..............................................................................................................3

D. General Safety Messages .........................................................................................................................................3

E. Electric and Installation Precautions..........................................................................................................................3

F. Operation Precautions...............................................................................................................................................4

G. Maintenance, Service, and Disposal Precautions .....................................................................................................5

INSTALLATION REQUIREMENTS ........................................................................................................................................6

A. Tools and Parts..........................................................................................................................................................6

B. Location Requirements..............................................................................................................................................6

C. Installation Clearances ..............................................................................................................................................6

D. Electrical Requirements.............................................................................................................................................7

E. Appliance Dimensions ...............................................................................................................................................7

F. Unpacking the Appliance ...........................................................................................................................................7

G. Packing Material Disposal .........................................................................................................................................7

H. Remove Transport Bolts ...........................................................................................................................................7

I. Select the Location ....................................................................................................................................................8

J. Connect the Inlet Hose..............................................................................................................................................8

K. Drain System Options................................................................................................................................................8

L. Fastening and Leveling the Appliance.......................................................................................................................9

OPERATING INSTRUCTIONS............................................................................................................................................ 10

A. Laundering Recommendations................................................................................................................................10

B. View of Control Panel and Functions ...................................................................................................................... 11

C. Option Buttons.........................................................................................................................................................13

D. Reference Symbols Displayed on the Panel ...........................................................................................................14

E. Preparing for First Use ............................................................................................................................................14

F. Laundering Fabrics..................................................................................................................................................14

CARE AND CLEANING........................................................................................................................................................16

A. Cleaning the Appliance Cabinet ..............................................................................................................................16

B. Cleaning the Internal Drum......................................................................................................................................16

C. Cleaning the Detergent Dispenser and Grooves.....................................................................................................16

D. Cleaning the Inlet Filter............................................................................................................................................16

E. Cleaning the Tap Filter............................................................................................................................................. 16

F. Washing the Filter in the Appliance .........................................................................................................................17

G. Removing Foreign Objects ......................................................................................................................................17

H. Winterizing/Storing when temperatures drop below 32° F (0° C):...........................................................................17

DISPLAY DIAGNOSTIC CODES .........................................................................................................................................19

APPENDIX ...........................................................................................................................................................................20

A. Fabric Care Label References.................................................................................................................................20

B. Technical Speciﬁcations ..........................................................................................................................................20

INTRODUCTION

These instructions apply to the washer/dryer combo (hereinafter referred to as the “appliance”). The appliance is designed

and intended for installation and use in a recreational vehicle or other mobile applications.

These instructions will ensure a properly installed and properly functioning appliance.

Dometic Corporation reserves the right to modify appliance appearances and speciﬁcations without notice.

DOCUMENT SYMBOLS

Indicates additional information that is not re-

lated to physical injury. Indicates step-by-step instructions.

IMPORTANT SAFETY INSTRUCTIONS

This manual has safety information and instructions to help

you eliminate or reduce the risk of accidents and injuries.

A. Recognize Safety Information

This is the safety alert symbol. It is used to

alert you to potential physical injury hazards.

Obey all safety messages that follow this

symbol to avoid possible injury or death.

B. Understand Signal Words

A signal word will identify safety messages and

property damage messages, and will indicate the

degree or level of hazard seriousness.

indicates a hazardous situation that,

if NOT avoided, could result in death or serious in-

jury.

indicates a hazardous situation that,

if NOT avoided, could result in minor or moderate

injury.

is used to address practices NOT

related to physical injury.

This manual has safety information and instructions to help

you eliminate or reduce the risk of accidents and injuries .

C. State of California Proposition 65

Warnings

The California Safe Drinking Water

and Toxic Enforcement Act requires the Governor

of California to publish a list of substances known

to the State of California to cause cancer, birth

defects, or other reproductive harm, and requires

business to warn of potential exposure to such sub-

stances.

This product contains a chemical known to the Sate

of California to cause cancer, birth defects, or other

reproductive harm. This appliance can cause low-

level exposure to some of the substances listed,

including benzene, formaldehyde, and carbon mon-

oxide.

D. General Safety Messages

Failure to obey the following instruc-

tions could result in death or serious injury due to

electrical shock, ﬁre, or explosion.

This appliance MUST be installed and serviced by a

qualiﬁed service technician.

Read and understand these instructions before install-

ing, using, servicing, or performing maintenance on

this appliance.

The safety precautions provided in this manual cannot

cover all possible conditions that may occur. Com-

mon sense and caution MUST be exercised when

installing, maintaining, and operating this appliance.

The installation MUST comply with all applicable local

and national codes including the latest editions of the

following standards:

U.S.A.

●ANSI/NFPA70, National Electric Code (NEC)

●ANSI/NFPA1192, Recreational Vehicles Code

Canada

●CSA C22.1, Parts I & II, Canadian Electrical Code

●CSA Z240 RV Series, Recreational Vehicles

E. Electric and Installation Precautions

Failure to obey the following instruc-

tions could result in death or serious injury due to

electrical shock, ﬁre, or explosion.

●This appliance weighs 175 lbs (79 kg). Do NOTat-

tempt to move or reposition this appliance unless

you are fully capable of doing so without injury.

●The appliance should NOT be installed in any

room with above-average humidity. It MUST NOT

be stored in any room with explosive or caustic

gases.

●Ensure that the water and electrical hookup(s)

is/are connected by a qualiﬁed technician in ac-

cordance with the manufacturer's instructions

(refer to the "Installation Instructions" on pages

6-9) and local safety regulations.

●Do NOT modify the power cord provided with the

appliance for any reason. Have a proper outlet

installed by a qualiﬁed electrician.

●Route and secure the power cord to protect it from

damage. Do NOT use extension cords.

●This is a 120V/60Hz appliance. Make sure the

cord is connected to a 120V/60Hz power source.

●Ensure this appliance is only used on a dedi-

cated 120V electrical circuit that has 15 amps of

overcurrent protection. Use time-delay fuses with

this appliance when it is connected to a circuit

protected by fuses.

●This appliance MUST be grounded. In the event

of a malfunction or breakdown, grounding will

reduce the risk of electrical shock by providing a

path of least resistance for the electric current.

This appliance is equipped with a cord that has an

equipment-grounding conductor and a grounding

plug. The plug MUSTbe plugged into an appropri-

ate outlet that is properly installed and grounded

in accordance with all local and national codes

and ordinances.

●This appliance is for indoor use only.

●Packing materials may cause suffocation. Keep

all packing materials away from children.

●All packaging and transportation bolts MUST be

removed, otherwise serious damage may occur

while washing or drying clothes.

Risk of corrosion or freeze damage.

●Do NOT install or store this appliance where it will

be exposed to temperatures below 32°F (0°C) or

moisture.

F. Operation Precautions

Failure to obey the following instruc-

tions could result in death or serious injury due to

electrical shock, ﬁre, explosion, suffocation, poison-

ing, or allergic reaction.

●Read and understand this entire manual before

using the appliance.

●Contact your local distributor, service agent, or

the manufacturer if you have any questions about

the proper operation and service of the appliance

●This appliance is intended for RV use only.

●This appliance is NOT intended for use by per-

sons (including children) with reduced physical,

sensory, or mental capabilities, unless the user

is operating the appliance under the supervision

of a legal parent or guardian capable of safely

operating the appliance. When children become

mature enough to operate the appliance, it is the

legal responsibility of the parent or guardian to

ensure that they are instructed in and capable of

the safe use of the appliance.

●Do NOT use any toxic solvents, such as alco-

hol, as a detergent. Only approved detergent

pods or select HE liquid detergents suitable

for front-loading washing machines should

be used.

●Do NOT launder fabrics that have been cleaned,

washed, soaked, or spotted with gasoline, dry

cleaning solvents, or any other ﬂammable or

explosive substances as they give off vapors that

could ignite or explode.

IMPORTANT SAFETY INSTRUCTIONS

●Do NOT add gasoline, dry cleaning solvents, or

any other ﬂammable or explosive substances to

the appliance as they give off vapors that could

ignite or explode.

●Do NOT place any item with traces of any ﬂam-

mable substance, such as vegetable oil, cooking

oil, or any other petroleum-based oil or distillate

into the appliance. Even after laundering, these

substances may smoke or ignite.

●Under certain conditions, hydrogen gas may be

produced in a hot-water system that has NOT

been used for two weeks or more. HYDROGEN

GAS IS EXPLOSIVE. If the hot-water system

has NOT been used for two weeks, open all hot-

water faucets and allow water to ﬂow for several

minutes before using the appliance. This will re-

lease any accumulated hydrogen gas. The gas is

ﬂammable. Do NOT smoke or use an open ﬂame

during this time.

●Do NOT allow children to play on, in, or with the

appliance. Close supervision of children is neces-

sary when the appliance is in use.

●Children or pets may climb into the appliance

between uses. Check the appliance before each

use.

●Do NOT operate the laundering machine if any

guards, panels and/or fasteners, except transport

bolts, have been removed.

●Do NOT operate the appliance if any parts are

missing or broken.

Failure to obey the following instruc-

tions could result in personal injury.

●Be careful of scalding water or steam when the

appliance drains hot wash water.

●Ensure that the water inside the drum has drained

before opening the door. Do NOT open the door

if there is any water visible.

●The glass door may become very hot during

operation.

●Caution should be used when opening the appli-

ance door after the drying cycle.

●ALWAYS turn the appliance off before opening

the door. Do NOT reach into the appliance if the

tub is in motion.

●Do NOT place any ﬁberglass materials, such

as curtains or window coverings that may use

ﬁberglass, in the appliance. Small particles may

remain and stick to fabrics in subsequent washes

causing skin irritation.

IMPORTANT SAFETY INSTRUCTIONS

Failure to obey the following instruc-

tions could result in premature wear, water damage,

or other damage to the appliance or its surroundings.

●Before operating this appliance, all packing mate-

rials and transport bolts MUST be removed. Oth-

erwise, the appliance may be seriously damaged

during attempted use (refer to page 7 "Remove

Transport Bolts").

●Prior to initial use, run the appliance through the

cotton and hot water modes without any articles

of fabric inside. This is required to ﬂush out any

debris that may be in the hoses or drum.

●Only fabrics suitable for machine laundering and/

or drying should be placed in the appliance.

●Do NOT dry anything containing foam rubber or

similarly textured rubber-like materials.

●Do NOT wash carpets.

●Any sharp or metal objects such as coins, nails,

screws, pebbles, jewelry, hair broaches, or curl-

ers may cause appliance or fabric damage if put

into the appliance.

●Ensure all pockets on clothing are emptied before

laundering.

●Do NOT use fabric softener sheets in the appli-

ance. Use liquid fabric softeners only.

●Disconnect the power and shut off the water sup-

ply when the appliance will NOT be in use.

●NEVER reﬁll the water by hand during laundering.

●ALWAYS empty the machine when the cycle has

completed.

●ALWAYS follow the fabric care instructions rec-

ommended by the fabric manufacturer.

●Do NOT use standard powdered detergents with

the appliance. Use caution and limit the quantity of

bleach and other stain removers when pretreating

stained fabric.

●Do NOT use the controls in a manner inconsistent

with the instructions in this manual.

●Check the ﬁll hose connection on a regular basis

to ensure there is no leakage.

●Do NOT climb, lean, or sit on the appliance.

●Do NOT close the door with excessive force. If it

is difﬁcult to close the door, ensure that the load

is evenly distributed and does NOT exceed the

appliance's capacity (see page 11).

G. Maintenance, Service, and Disposal

Precautions

Failure to obey the following instruc-

tions could result in death or serious injury due to

electrical shock, ﬁre, or suffocation.

●ALWAYS unplug the appliance before perform-

ing any maintenance. Disconnect the power by

grasping the plug, NOT the cord.

●NEVER disconnect the power cord with wet

hands.

●This appliance MUST be repaired by an autho-

rized service center using only authentic ac-

cessories and service parts, unless speciﬁcally

recommended in the user maintenance instruc-

tions or in published user repair instructions that

you understand and have the skill to implement.

●Do NOT attempt to repair or replace any part of

the appliance unless speciﬁcally recommended in

the user maintenance instructions or in published

user repair instructions that you understand and

have the skill to implement.

●If the power cord is damaged, have it replaced

by a qualiﬁed service professional.

Failure to obey the following instruc-

tions could result in structural damage to the appliance

or water damage to its surroundings.

●The interior of the appliance should be cleaned

periodically by a qualiﬁed service professional.

●The transport bolts MUST be reinstalled by a

qualiﬁed technician prior to moving the appliance.

●The accumulated water should be drained from

the appliance prior to moving or servicing the

appliance.

●Handle the appliance carefully. NEVER grasp a

protruding part while lifting the appliance. The

appliance door cannot be used as a handle dur-

ing transport.

●If you decide to dispose your appliance, please

observe local waste disposal regulations. Cut off

the power cord so that the appliance cannot be

connected to a power source. Remove the door

so that animals and small children cannot get

trapped inside the appliance.

INSTALLATION REQUIREMENTS

Risk of serious injury or death due to

electrical shock.

The appliance MUST be properly grounded. Ground-

ing reduces the risk of electrical shock if the appliance

housing becomes energized.

Risk of serious injury or death due

to ﬁre.

The appliance MUST be connected to a dedicated

15 amp circuit separate from other electrical appli-

ances. The overcurrent protection MUST be rated

at 15 amps.

The life of the appliance may be sig-

niﬁcantly shortened if operated on an incline.

The maximum incline angle upon which the appliance

rests MUST be no more than two degrees.

A. Tools and Parts

Gather the required tools and parts before attempting

installation. The parts included with the appliance are

in the drum. Other items required for installation are

the responsibility of the installer.

●Items included:

●(2) Water hoses

●(3) Brackets

●(4) Transport bolts

●(1) Template

●Items NOT included:

●1/4" nut driver

●3/8" open end wrench

●7/16" socket with ratchet

●3/8" socket with ratchet

●Adjustable 9/16" open-end wrench

●Channel-lock adjustable pliers

●Carpenter’s level

●Flexible screw driver extension

●Cable tie

●Screws

●Siphon break (if required)

B. Location Requirements

Selecting the proper location for your appliance im-

proves performance, minimizes noise and possible

appliance movement. Your appliance can be in-

stalled under a custom counter, closet, or recessed

area. See “Drain System Options” (Page 8). Proper

installation is the qualiﬁed installer's responsibility.

●Required Items:

●A water heater set to deliver 120°F (49°C)

water to the appliance.

●A grounded electrical outlet located within 3

ft. (1 m) of where the power cord is attached

to the back of the appliance. See “Electrical

Requirements”.

●Hot and cold water faucets located within 3

ft. (1 m) of the hot and cold water ﬁll valves,

and water pressure of 7.3–145 psi (0.05MPa–

1MPa).

●A level ﬂoor with a maximum slope of 2° (2.5

cm) under the entire appliance.

●A sturdy and solid ﬂoor to support the appli-

ance's total weight (water and load) of 200 lbs.

Installing the appliance on soft ﬂoor surfaces,

such as carpets or surfaces with foam backing,

is NOT recommended.

●Do NOT operate or store your appliance in

temperatures below 32°F (0°C). Some water

can remain in the appliance and cause dam-

age in low temperatures.

C. Installation Clearances

●The location MUST be large enough to allow the

appliance door to be fully opened.

●Additional spacing should be considered for ease

of installation and servicing. The door opens more

than 90°, and it is NOT reversible (Fig. 1).

●Additional clearances might be required for wall,

door, and ﬂoor moldings.

●Spacing of 1 inch (2.5 cm) on all sides of the ap-

pliance is required (Fig. 2).

FIG. 1

FIG. 2

The dimensions shown are for minimal spacing using a

custom under-counter installation.

F. Unpacking the Appliance

●After unpacking, check the appliance for any

damage that may have occurred during transport.

●Instructions for unpacking the appliance from

the carton are located on the top of the transport

carton.

●Ensure that all included items are undamaged. If

any part of the appliance incurred damage during

transport, ﬁle a damage claim with the shipping

company.

G. Packing Material Disposal

Risk of serious injury or death due to

suffocation. The packing materials of this machine

may be dangerous to children. Please dispose of

them properly, and keep out of reach of children.

●Do NOT throw the packing materials away with

the other daily trash. Dispose of these materials

according to the relevant local regulations.

H. Remove Transport Bolts

Before using this appliance, transport bolts

MUST be removed from the backside of this

machine. Complete the following steps to re-

move the bolts:

D. Electrical Requirements

Risk of serious injury or death due

to electrical shock, ﬁre, or explosion if the following

instructions are NOT followed.

●A 120V/60Hz, AC only, 15 or 20 amp fused elec-

trical supply is required. A time-delay fuse or a

circuit breaker serving only this appliance MUST

be provided.

●This appliance is equipped with a power supply

cord that has a 3-prong grounding plug. Do NOT

remove the ground plug.

●Do NOT use an adapter.

●Do NOT use an extension cord.

●To minimize possible shock hazard, the power

cord MUST be plugged into a 3-prong, grounding

type outlet that is grounded in accordance with

local codes and ordinances. If a 3-prong outlet is

NOT available, it is the responsibility and obliga-

tion of the user to have the properly grounded

outlet installed by a qualiﬁed electrician.

●If local codes permit the use of a separate ground

wire, it is necessary that a qualiﬁed electrician

determine that the ground path is adequate.

●DO NOT ground the appliance to a gas hose.

●Consult a qualiﬁed electrician if you are unsure

whether the appliance is properly grounded.

●DO NOT use a fuse in the neutral or ground

circuit.

E. Appliance Dimensions

INSTALLATION REQUIREMENTS

FIG. 3

FIG. 1

INSTALLATION INSTRUCTIONS

Loosen all bolts with a wrench and then remove

them and their sleeves.

2. Cover the holes with transport hole plugs.

3. Keep the transport bolts for future use.

4. Make sure the small triangle foam is removed

with the bottom one together. If not, lay the unit

down with side surface, then remove the small

foam from the unit bottom manually.

Risk of damage to appliance or sur-

roundings. Review and follow all safety and installa-

tion instructions during installation.

I. Select the Location

Before installing the appliance, select a location

that adheres to the following criteria:

A rigid, dry, and level surface removed from di-

rect sunlight.

2. Proper ventilation

3. Room temperature must be above freezing

(32°F or 0°C).

4. Isolated from heat sources

NOTE: Ensure the appliance does not rest on its

power cord. It is recommended the appliance is

not installed on any soft ﬂoor surfaces.

J. Connect the Inlet Hose

Connect the inlet hose as indicated in the

ﬁgure. Connect the hoses to the hot water taps

as indicated.

Do not over-tighten the hoses. If there is any

leakage after connection, conﬁrm the hose end

has a rubber “O” ring and repeat the steps to

connect the inlet hose.

2. Connect the ﬁtting to the tap and fasten it clock-

wise.

FIG. 6

3. Connect the opposite end of the hose to the

inlet valve on the backside of the appliance.

FIG. 5

K. Drain System Options

●The standpipe drain system may be installed in the

wall (Fig. 6) or ﬂoor (Fig. 7).The drain requires a min-

imum inner-diameter standpipe of 2 inches (5 cm).

●The minimum carry away capacity of the drain can

be no less than 17 gal (64 L) per minute. The top

of the standpipe MUST be between at least 23.6

inches (60 cm) and 39.4 inches (100 cm) above

the bottom of the appliance.

●The laundry tub drain system (Fig. 8) requires a

minimum 20 gal (76 L) capacity. The top of the

laundry tub MUST be a minimum of 23.6 inches

above the ﬂoor but no more than 39.4 inches.

FIG. 8

FIG. 4

(100 cm

)

”

3.6

”

Max 39

.4”

FIG. 7

INSTALLATION INSTRUCTIONS

●The ﬂoor drain system (Fig. 9) requires an air

gap and siphon break that MUST be purchased

separately. The siphon break MUST be a mini-

mum of 23.6 inches (60 cm) from the bottom of

the appliance. Additional hoses may be needed.

L. Fastening and Leveling the Appliance

If the template is not placed ﬂush with the back

wall of the installation area, measure its location

to ensure proper alignment of the appliance.

2. Align the appliance with the template and se-

cure the brackets with screws on the exposed

bracket sides. Next, remove the template

and ﬁnish securing the brackets. Note: The

slot openings must be facing toward the front.

3. Ensure the ﬂoor’s surface is protected against

damage. Slide the appliance and align the rear

legs to the rear bracket slot openings. Ensure

that the legs are within ¼ inch from the back of

the slot.

4. Level the machine using the front legs.

a. When positioning the laundering machine,

ensure the front legs are in the shortest po-

sition that will allow room for the foot to ﬁt

inside the bracket. If not, adjust the legs to

their shortest position by hand and tighten

the nuts with a wrench.

b. After positioning the appliance, ensure that it

is stable by pressing on the four corners of

the appliance. If the appliance shifts, the leg

underneath must be adjusted.

c. To ensure the positioning of the appliance,

loosen the lock nut with a wrench and turn

the leg with your hand until it contacts the

ﬂoor.

d. Press the leg with one hand and fasten the

nut tightly to the cabinet with a wrench.

e. Press the four corners again to ensure the

legs have been properly locked and adjust-

ed. Repeat step 4b if the appliance is still

unstable.

f. Use a level to ensure the appliance is

not on an incline. Repeat steps 4b–d un-

til the machine is completely leveled.

5. Align the bracket on the front right side in line

with the leg, and slide the bracket over the leg

until it touches the foot. The slot opening must

be facing the back of the appliance. Fasten

the bracket with screws through the two out-

board holes. The inboard holes are left empty.

TEMPLATE TOP VIEW

BACK OF APPLIANCE

FRONT

FIG. 9

FIG. 10

FIG. 12

FIG. 11

FRONT OF APPLIANCE

FIG. 13

FIG. 14

OPERATING INSTRUCTIONS

A. Laundering Recommendations

●Review, understand, and follow all Safety and Op-

eration instructions when operating the appliance.

●Thoroughly review all operating instructions be-

fore using the appliance. Any incline of the RV

contributes to the angle of the appliance. Do NOT

operate the appliance if the tilt of the appliance

exceeds 2°.

●Dometic is NOT responsible for damage to any

improperly laundered fabrics, including but NOT

limited to color fading, color transfer, wrinkling,

and shrinkage.

●If you are laundering clothes for the ﬁrst time,

check their color fastness. Use a white towel

damp with liquid detergent to rub a portion of the

fabric and check if the towel is stained by the fab-

ric. Wash clothes that lose their color separately.

●Wash temperature-sensitive clothes as directed

by the label to avoid premature fading.

●NEVER store clothes in the appliance. Otherwise

they may mold or stain. Remember to dry clothes

immediately after laundering to prevent molding.

Clothes may change color or fade if the label

instructions are NOT observed.

●Clothes that may NOT be washed:

●Clothes that may be damaged if immersed

in water.

●Ties, waistcoats, leather garments, and outer

garments, which may shrink if immersed in

water.

●DO NOT wash clothes marked for dry clean-

ing only.

●Costumes, embossed, or resin clothes may be

damaged when immersed in water. Along with

cotton and wool materials, the clothes that are

most easily damaged are wrinkle-style silk and

any fabric lined with fur.

●DO NOT wash clothes without material labels

or laundering requirements.

●Some clothes such as ﬂeece and corduroy should

be turned inside-out before laundering to reduce

ﬁber loss. ALWAYS check the care label before

laundering.

●DO NOT wash water-proof materials such as ski

suits or raincoats.

Failure to obey the following instruc-

tions could result in death or serious injury due to

ﬁre or explosion. NEVER wash clothes stained with

chemicals such as gasoline, petroleum, benzene,

paint thinner, alcohol, cooking oils, etc. NEVER add

such chemicals to the appliance.

●Regarding detergents:

●Use the recommended Dometic Detergent

Pods inside the drum with clothes. For liquid

detergent, use HE front-loading speciﬁcally

formulated detergent. Pre-detergent, liquid

detergent and fabric softener go in the dis-

penser drawer. Use only 1–2 tablespoons of

liquid detergent.

●Take into consideration the type and amount of

fabric to be washed and the laundering method

before choosing your detergent; otherwise,

excessive suds may be generated.

●Use bleach sparingly as it can damage fabric

permanently.

●DO NOT use powder detergents as it will cre-

ate sudsing.

●Laundering effectiveness depends on water

softness as well as using detergent properly.

●Keep detergents and additives in a dry place

out of reach from children.

●Additional notes and guidelines for clothes:

●Clothes washed together should share similar

characteristics. Care labels deﬁne whether a

shirt is cotton, blended ﬁber, synthetic ﬁber,

silk, or wool.

●White and colorful clothes MUST be washed

and dried separately. All new colorful fabrics

should be washed separately.

●Delicate articles MUST be washed separately.

New pure wool fabrics, curtains, and silk fab-

rics should be washed on the delicate setting.

●Clothes should be sorted prior to laundering.

Remove the hooks from any curtain before

laundering.

●Decorations on fabric may damage the

laundering machine. Fabric with buttons or

embroideries should be turned inside-out be-

fore laundering. ALWAYS read the care label

before laundering.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Dometic Laveuse-sécheuse

Dometic

Dometic WDCVLW Mode d’emploi

Manuels Laveuse-sécheuse populaires d'autres marques

Whirlpool

Whirlpool WFC8090GX Manuel utilisateur

Whirlpool

Whirlpool LTE5243DQ6 Manuel utilisateur

Bosch

Bosch XQG100-WDU285H00W Manuel utilisateur

montpellier

montpellier MWD7512S Manuel utilisateur

LG FHD0905 T Series Manuel utilisateur

Midea

Midea MF200D85B Manuel utilisateur

Maytag

Maytag MGT3800XW Manuel utilisateur

Siemens

Siemens WD15G440TR Fiche technique

Equator

Equator Clothes Processor EZ1500 Manuel utilisateur

Splendide

Splendide WDC7100XCP Manuel utilisateur

John Lewis

John Lewis JLWD 1408 Manuel utilisateur

Ariston

Ariston A1200WD Manuel utilisateur

Whirlpool

Whirlpool YLTE5243DQ5 Manuel utilisateur

Whirlpool

Whirlpool WFCR 75230 Guide d'installation

ATT

ATT Hammer Jet v1 Manuel utilisateur

AEG

AEG LAVAMAT 63742 VI Manuel utilisateur

Electrolux

Electrolux EWW8024P5WB Manuel utilisateur

GE GTD42EASJWH Manuel utilisateur