DMP Electronics Com Series Guide de l'administrateur

CELLCOMEX HOW-TO GUIDE:

ECP PASSTHRU

TABLE OF CONTENTS

ECP Passthru Overview .......................................................................................... 1

Procedure............................................................................................................................................................. 1

Required Materials............................................................................................................................................ 1

Step 1: Mount the Communicator......................................................................... 2

Step 2: Wire the Communicator........................................................................... 2

Step 3: Program the Vista Keypad....................................................................... 3

Step 4: Conﬁgure ECP Settings ........................................................................... 4

Remotely (Dealer Admin).............................................................................................................................. 4

Adding User 2..................................................................................................................................................... 4

Step 5: Changing Programming ........................................................................... 5

Option 1: Programming with Host Keypad.............................................................................................. 5

Option 2: Programming using Compass and Remote Link .............................................................. 5

Add the VISTA Panel in Compass............................................................................................................... 6

Set Up Communication in Compass.......................................................................................................... 7

Conﬁgure TCP/IP Settings in Compass.................................................................................................... 8

Reference ................................................................................................................. 9

Virtual Keypad.................................................................................................................................................... 9

VISTA Panel Compatibility ............................................................................................................................ 10

CELLCOMEX SERIES HOW-TO GUIDE: ECP PASSTHRU | DIGITAL MONITORING PRODUCTS 1

ECP PASSTHRU OVERVIEW

CellComEX Universal Communicators enable you to take over and manage ECP panels with connection to

the ECP Bus. This feature is called ECP Passthru.

This guide is designed to walk you through ECP passthru installation and setup. For more complete

information on CellComEX setup, refer to the CellComEX Installation and Programming Guide (LT-2663).

Procedure

The installation must follow this procedure:

Step 1: Mount the communicator.

Step 2: Wire the communicator.

Step 3: Program Vista keypad device address 20

Step 4: Configure ECP settings (remotely or locally)

Step 5: Changing Programming

Required Materials

The following software and hardware components are required to ensure successful system takeovers:

• Compatible Honeywell VISTA panel (refer to “VISTA Panel Compatibility”)

• Connection to Dealer Admin (for programming)

• 18-22 AWG unshielded wire (RYGB)

• Remote Link minimum Version 2.21

+DC- GTR

+ Z -

PROG

CellComEX

DC Power

Zone 1

Tip

Output

Ground

Ring

Cellular Antenna

SMA Connector

Cell Modem

Programming Connection

Terminal Block

Reset Pads

Status LEDs

STAT US

+DC- GTR

+ Z -

RESET

Figure 1: CellComEX Components

CELLCOMEX SERIES HOW-TO GUIDE: ECP PASSTHRU | DIGITAL MONITORING PRODUCTS 2

STEP 1: MOUNT THE COMMUNICATOR

The module comes in a high-impact plastic housing that you can mount directly to a wall, backboard, or

other flat surface.

For easy installation, the back and ends of the CellComEX housing have wire entrances. The back also

contains multiple mounting holes that allow you to mount the module on a single-gang switch box.

Remove the PCB from the plastic housing by loosening the clips on one side and gently lifting it out of the

housing base.

Insert the included screws in the desired mounting hole locations and tighten them to secure the housing to

the surface.

Reinstall the PCB in the housing base.

STEP 2: WIRE THE COMMUNICATOR

The communicator can be connected to the ECP Bus of a VISTA panel. See Table 1 and Figure 2 for the

necessary wiring connections.

Caution: Remove all AC and battery power from the control panel before wiring.

1. Attach the antenna to the SMA connector. Refer to Figure 1.

2. Make sure the Vista panel has batteries connected to the system and is also connected to an appropriate

power supply.

3. Connect the communicator to Dealer Admin or Remote Link.

Communicator to ECP Wiring

Com Series ECP Bus Typical Color

+DC Keypad Power Red

-DC GND Black

Z+ Data Out Yellow

Z- Data In Green

Table 1: Wire Connections

CELLCOMEX SERIES HOW-TO GUIDE: ECP PASSTHRU | DIGITAL MONITORING PRODUCTS 3

+DC- GTR

+ Z - O

Use 18-22 AWG

for Power Supply

connection

–

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

++–

TIP

(BROWN)

RING

(GRAY)

TIP

(GREEN)

RING

(RED)

BLACK

RED

SYNC

COM

DATA

(USE SA4120XM-1

CABLE)

1 2 3 4 5 6 7 8

OUT 17

+12 AUX

GND

OUT 18

VISTA 20P ONLY

VISTA-20P

From DC+

From DC–

From Z+

From Z-

To Data In (6)

To Data Out (7)

To Negative (4)

To Positive (5)

RED

BLACK

GREEN

YELLOW

RED

BLACK

GREEN

YELLOW

Figure 2: ECP Wiring

STEP 3: PROGRAM THE VISTA KEYPAD

In this step, you will program VISTA Keypad 5 Device Address 20. This enables the VISTA panel to

communicate with a CellComEX. This step must be performed locally at the VISTA panel.

1. Power down and then power up the VISTA panel.

2. Within 1 minute of powering up the VISTA panel, simultaneously press and hold the #and *buttons on

the Vista keypad.

3. The keypad displays INSTALLER CODE. Enter the installer code (default is 4112), followed by 800.

4. Enter *193, then enter 1 0.

5. To save and exit programming, enter *99.

CELLCOMEX SERIES HOW-TO GUIDE: ECP PASSTHRU | DIGITAL MONITORING PRODUCTS 4

STEP 4: CONFIGURE ECP SETTINGS

For the communicator to properly process data from the VISTA panel, keypad input must be set to ECP. You

can perform this programming remotely with Dealer Admin.

Why is this important? Dealer Admin configures the CellComEX to receive ECP data.

Remotely (Dealer Admin)

Before programming, ensure the ECP panel’s IP address is set as default.

1. Go to Customers.

2. Find and select the system name.

3. Go to Programming > System Options.

4. In Keypad Input, select ECP.

5. In ECP Partition, enter the number of the partition where you want the communicator to operate.

6. Press Begin ECP Setup.

7. If the host panel is a VISTA 128, turn on VISTA 128.

8. Enter the host panel’s installer code in VISTA Installer Code.

9. Press Begin.

10. After setup is complete, Dealer Admin automatically retrieves zones from the host panel. If you need to

retrieve zones again later, open System Options and select Get Zones.

Adding User 2

1. At USER NUMBER, enter 2.

2. At CODE NO, enter the code from the Vista panel’s User 2.

3. At USER NAME, enter MASTER.

4. At MASTER? select the checkbox.

5. Press Send.

CELLCOMEX SERIES HOW-TO GUIDE: ECP PASSTHRU | DIGITAL MONITORING PRODUCTS 5

STEP 5: CHANGING PROGRAMMING

Option 1: Programming with Host Keypad

If you have access to the host panel, you can make zone programming changes in the panel locally using

a host keypad. To retrieve new zone programming, select Get Zones in the System Options tab in Dealer

Admin.

Option 2: Programming using Compass and Remote Link

Starting with Remote Link™ Version 2.21, you can connect a customer’s Honeywell VISTA® panel with

CellComEX communicators using Honeywell’s Compass® software and Remote Link.

Why is this important? Remote Link is necessary if programming using Compass. It provides a link

between the CellComEX and the host panel. Without doing this, no new programming (zones, devices, etc.)

can be sent to or retrieved from the host panel.

The following instructions assume that you already have the CellComEX added with the appropriate

connection information in Remote Link. To enable ECP Passthru for that account, complete the following

steps.

1. Right-click Remote Link and select Run as administrator.

2. Double-click the communicator account to open it.

3. Go to Program > System Options.

4. To enable communication, go to Keypad input and select ECP. Press OK.

5. Go to File > Panel Information.

6. In Connection Information, enter the VISTA account number in Ecp Acct.

7. Press OK.

8. Go to ECP Passthru > ECP Start/Stop Server.

9. Press Ye s when asked if ECP Passthru should be started.

10. Minimize Remote Link.

CELLCOMEX SERIES HOW-TO GUIDE: ECP PASSTHRU | DIGITAL MONITORING PRODUCTS 6

Add the VISTA Panel in Compass

1. Open Compass.

2. In the lower right corner of the Customers page, select Add. The Customer Detail window opens.

3. In Subscriber Data, enter a Receiver number and Account number.

4. In the Panel Data section, select the VISTA panel model and revision number.

5. In Network Device MAC Addr, enter FFFFFF.

6. Press OK.

CELLCOMEX SERIES HOW-TO GUIDE: ECP PASSTHRU | DIGITAL MONITORING PRODUCTS 7

Set Up Communication in Compass

1. In Customers, double-click the account that you created in the previous section.

2. The Panel Editor opens. Go to Tools > Communications.

3. Go to File > Communication Settings.

4. Select TCPIP Port Settings.

5. To ensure that Compass uses a TCP/IP connection, select a TCP/IP port.

6. Press Add.

7. Back in Communication Settings window, select Apply.

8. Press OK.

478

CELLCOMEX SERIES HOW-TO GUIDE: ECP PASSTHRU | DIGITAL MONITORING PRODUCTS 8

Conﬁgure TCP/IP Settings in Compass

1. In the lower left corner of the Compass Communication window, press Connect.

2. A dialog pops up to notify you that communication settings must be configured. Press OK.

3. Select Enable TCP/IP.

4. In the TCPIP Port dropdown, select the appropriate TCP/IP port.

5. Ensure that the Network Device MAC Addr is FFFFFF.

6. In Connection Mode, select ECP.

7. Ensure that AlarmNet-i is selected.

8. Press Connect.

Retrieving Zones in Dealer Admin

After programming in Compass is completed, navigate to the System Options tab in Dealer Admin and press

Get Zones. This ensures any new programming can be viewed in Virtual Keypad and Dealer Admin.

Autres manuels pour Com Series

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels DMP Electronics Téléphone portable

DMP Electronics

DMP Electronics iComSL Series Guide d'installation

DMP Electronics

DMP Electronics iComSL Manuel utilisateur

DMP Electronics

DMP Electronics 464-263H Instructions de montage

DMP Electronics

DMP Electronics 263CSMX Instructions de montage

DMP Electronics

DMP Electronics CellCom SLC Manuel d'installation et d'exploitation

DMP Electronics

DMP Electronics 464-263C Instructions de montage

DMP Electronics

DMP Electronics CELLCOMSL SERIES Guide d'installation

DMP Electronics

DMP Electronics CellCom-LTE-V SERIES Guide d'installation

DMP Electronics

DMP Electronics 263LTE Series Manuel utilisateur

DMP Electronics

DMP Electronics CELLCOMEX Com Series Guide de l'administrateur

DMP Electronics

DMP Electronics CellCom-LTE-V SERIES Manuel utilisateur

DMP Electronics

DMP Electronics Com Series Guide de l'administrateur

DMP Electronics

DMP Electronics XR500 SERIES Manuel utilisateur

DMP Electronics

DMP Electronics 265HCAN Manuel utilisateur

DMP Electronics

DMP Electronics DUALCOM Series Manuel utilisateur

DMP Electronics

DMP Electronics DUALCOM Series Manuel d'installation et d'exploitation

DMP Electronics

DMP Electronics CellCom LTE Series Manuel utilisateur

DMP Electronics

DMP Electronics 263LTE-FN Manuel utilisateur

DMP Electronics

DMP Electronics Com Series Guide de l'administrateur

DMP Electronics

DMP Electronics CellComRT Manuel utilisateur

DMP Electronics

DMP Electronics 265LTE-V Manuel utilisateur

DMP Electronics

DMP Electronics CellComSLCF Instructions d'installation et d'utilisation

DMP Electronics

DMP Electronics 263LTE-V5 Manuel utilisateur

DMP Electronics

DMP Electronics 263H HSPA+ Instructions de montage

Manuels Téléphone portable populaires d'autres marques

Zte

Zte BLADE A520 Manuel utilisateur

Nokia

Nokia Lumia 620 Manuel utilisateur

Blackbe;rry

Blackbe;rry KEYone Manuel utilisateur

Bea-fon

Bea-fon X5 Premium Manuel utilisateur

Blackbe;rry

Blackbe;rry 8707 Series Manuel utilisateur

Blackbe;rry

Blackbe;rry Storm Mode d'emploi

LG LM-X420QN Manuel utilisateur

LifeWatch

LifeWatch V Manuel utilisateur

Bea-fon

Bea-fon SILVER LINE SL860 Manuel utilisateur

IKI Mobile

IKI Mobile KF4.5i Manuel utilisateur

Hitech

Hitech HT-850 Manuel utilisateur

Yezz

Yezz Fashion F10 Manuel utilisateur

Point Mobile

Point Mobile PM60 Manuel utilisateur

Blackbe;rry

Blackbe;rry Q10 Manuel utilisateur

Blackbe;rry

Blackbe;rry Bold 9900 Manuel utilisateur

Blackbe;rry

Blackbe;rry STORM 9500 - VERSION 5.0 Manuel utilisateur

LG LM-K420EMW Manuel utilisateur

ISAFE MOBILE

ISAFE MOBILE IS655.2 Manuel utilisateur