DL-Systeme für Messtechnik GmbH, Steinbeisstraße 32, 73614 Schorndorf
www.dl-systeme.de Page -10-
Leakage tester LTG 750
Instructions for use
Redefine or edit test programme
All the available programmes are shown on the left side. Unlike during selection, where
only the active programmes are present.
Upon tapping the programme (if needed, scroll down with the bar directly near the
programme list), the programme parameters are shown.
Via the list of name of the currently selected programme.
In the middle column, the measurement method, the subsequent programme, the
measuring times and the test settings.
In the right column, the settings of outputs for the additional board, if available.
The setting of the standard outputs and the selection, whether the programme should be
active (only then it is shown in the programme selection).
If a programme may be used by another one as the subsequent programme, it may not be
deactivated.
A message appears and the checkbox is deactivated.
At the same time, one gets a message, in which programmes is the currently selected one
referenced.
Buttons on the page:
-Edit: Active only when a field is selected, which permits an input
-Save programme: The changes are stored under the programme name
-Programme Import Export: Activated, if a USB stick having the format exFat is
inserted.
-Finish: Exiting the dialogue
