DK2 Power OPC533 Manuel utilisateur
OPC533
3 INCH CHIPPER SHREDDER
SWING CHUTE • OFFROAD-TOW ONLY • KOHLER® ENGINE • TOP LOADING
ASSEMBLY GUIDE
DK2 CORPORATE HEAD OFFICE
1080 CLAY AVENUE, UNIT 2
BURLINGTON, ONTARIO
L7L0A1 CANADA
DK2 USA WEST
4301 S VALLEY VIEW BLVD. SUITE 10-11
LAS VEGAS, NEVADA
89103 USA
DK2 USA EAST
3750 SOUTH AVENUE, NORTH UNIT
TOLEDO, OHIO
43615 USA
PARTS AND SERVICE 702-331-5353
-
WWW.DK2POWER.COM
2
STEP 1
CHECK THE PACKING
1. Open and unpack all items. Leave lots of working space.
2. Inspect all parts.
NOTE: UPON INSPECTION OF PARTS, IF YOU FIND ANY MISSING PARTS PLEASE CALL
DK2 POWER AT 702-331-5353 OR CONTACT US VIA OUR WEBSITE
WWW.DK2POWER.COM
PLEASE DO NOT RETURN TO THE STORE.
3
STEP 2
TIRES AND AXLE
1. Slide the wheels on the axle and pin.
2. Bolt the axle to the frame as shown.
4
STEP 3
FRONT STAND
1. Slide the front stand into the holder and pin.
5
STEP 4
FEED CHUTE HANDLE
1. Install the handle to the feed chute.
6
STEP 5
FEED CHUTE
1. Install the feed chute to the machine.
7
STEP 6
SIDE FEED CHUTE
1. Bolt the side feed chute to the machine.
8
STEP 7
CHIP CHUTE
1. Bolt the chip chute to the machine as shown.
9
STEP 8
TOW BAR
1. Slide the tow bar in place and pin.
10
STEP 9
CHIP BAG
1. Place the chip bag over the chip chute and tighten the draw string.
Autres manuels pour OPC533
1
Table des matières
Autres manuels DK2 Power destructeur de papier
Manuels destructeur de papier populaires d'autres marques
Swingline
Swingline STACK-AND-SHRED200X&200XL 60X Mode d’emploi
GBC
GBC ShredMaster CC055 Manuel utilisateur
UNITED OFFICE
UNITED OFFICE UAV 190 A1 Manuel utilisateur
UNITED OFFICE
UNITED OFFICE UAV 190 A1 Manuel utilisateur
Rexel
Rexel Optimum AutoFeed+ 45X Manuel utilisateur
Martin Yale
Martin Yale 227284S1 Manuel utilisateur
