dji TX32021028 Manuel utilisateur
Introduction
DJITM Video Transmitter features DJI O3 Pro technology that provides video transmission with
a maximum transmission range of 6 km, bit rate of up to 50 Mbps, and minimum end-to-end
latency within 100 ms. DJI Video Transmitter works at 2.4 GHz, 5.8 GHz and DFS, and is
capable of selecting the best transmission channel automatically. It supports AES 256-bit
encryption algorithm, and can output 1080p/60fps full HD images to multiple high-bright
remote monitors at the same time.
DJI Video Transmitter provides various power supply ports, which support DJI WB37 batteries ,
and can take power from Ronin devices through the DC-IN port. It provides various video
input and output ports such as HDMI-IN and SDI-IN, to fit most of the cameras on the market.
It also supports SDI loop-out function, which can be used with an external monitor.
DJI Video Transmitter is also equipped with a 1-inch OLED color screen, which can be set
through interactive buttons; built-in fan and precision metal design of the shell allows the
transmitter to be used normally in various harsh scenes, meeting the shooting needs of
various requirements such as radio and television, film, commercials, documentaries and so
on.
1. Antennas
Transmit the wireless signal.
2. Video Status LED
Indicates whether there is a video source signal input.
3. Linking Status LED
Indicates the linking status of the transmitter and receiving unit.
4. SDI Input Port
Video source sends signal to the transmitter unit.
5. SDI Output Port
The transmitter loops out the video source signal.
6. HDMI Port (Type A)
Used to receive the video source input signal.
7. Power/Communication Port (USB-C)
Used for activation, firmware update, and power supply and communication with
specific equipment.
8. DC IN Power Input Port
Supply power to the video transmitter by the provided power cable.
9. M4 Port
Used to install back plate for battery and various adapters for expansion.
10. External Power Supply Port
Supply power to other external devices.
11. Power Button
Press once to power on. Press and hold to power off.
12. Display Screen
Display the device menu.
13. Menu Dial
You can select and confirm on the screen menu by turning or pressing the dial.
14. Back Button
Press to return to the previous menu.
15. 3/8''-16 Screw Hole
16. 1/4''-20 Screw Hole
17. External Power Input Port
Install batteries by different back plate of battery, to supply power to the video
transmitter.
Installation and Connection
Installing Antennas
Install the four antennas on the video transmitter.
Installing WB37 Battery
1. Install the back plate which is compatible WB37 battery to the back of the video
transmitter and tighten two M4×12 screws.
2. Put the WB37 battery into the battery slot, press down the battery and push it to the
bottom until the RELEASE button pops up. A clicking sound indicates the battery is
properly secured.
Press and hold the RELEASE button, and push the battery in the opposite direction of
installation to remove the battery.
Installing Adapter
When used with DJI RS 2 gimbal or other equipment that is compatible with cold shoe
interface, an adapter is required to be installed.
1. Install the adapter to the front of the video transmitter and tighten two M4×12 screws.
2. Move the lever counterclockwise to lower the positioning block on the adapter.
3. Install the video transmitter to the DJI RS 2 gimbal through the cold shoe of the adapter.
4. Rotate the lever in the locking direction to finish installation.
Connection
USB-C to Lemo Cable
Connect the focus motor port (USB-C) of the DJI RS 2 to the DC IN port of the video
transmitter, the DJI RS 2 can supply power to the video transmitter.
P-Tap to Lemo Cable
Connect the 14.4V P-Tap port of Ronin 2 to the DC IN port of the video transmitter, the Ronin
2 can supply power to the video transmitter.
Lemo to Lemo Cable
Connect the 14.4V accessory power port of Ronin 2 to the DC IN port of the video transmitter,
the Ronin 2 can supply power to the video transmitter and communicate with it.
USB-C Cable
Connect the USB-C port of the video transmitter to a computer, which can be used for
activation, firmware update and other functions.
SDI Cable
Used to transmit SDI signal.
Activation
When powered on, connect the video transmitter to a computer and run DJI Assistant 2 (Ronin
Series) for activation.
Download DJI Assistant 2 (Ronin Series) at https://www.dji.com/xxx/downloads
Linking
To start linking, press and hold the menu dial on the video transmitter. The Linking Status LED
blinks red.
When the linking is complete, the linking status LED turns solid green and the video
transmitter can communicate with the high-bright remote monitor.
Video Status LED Description
Solid Green
Video input available
Solid Red
No video input
Linking Status LED
Description
Solid Red Device powered on, but not linked
Blinks Red Linking
Solid Green Linking successful. Wireless video transmission normal
Firmware Update
Use DJI Assistant 2 (Ronin Series) to update the firmware of the video transmitter.
1. Power on the device and connect to the USB 3.0 port of a computer using a USB-C cable.
2. Launch DJI Assistant 2 (Ronin Series) and log in with a DJI account.
3. Select the device and click Firmware Update on the left side of the screen.
4. Select the firmware version.
5. The firmware will be downloaded and updated automatically.
6. The device will restart automatically after the firmware update is complete.
Specifications
Weight
Approx. 350 g
Dimensions (antennas
excluded) 126.75×97.30×26 mm
Operating Frequency
2.400-2.4835 GHz
5.150-5.250 GHz
5.250-5.350 GHz
5.470-5.725 GHz
5.725-5.850 GHz
Transmitter Power (EIRP)
2.4GHz: <33 dBm (FCC), <20 dBm (SRRC/CE/MIC)
5.8GHz: <33 dBm (FCC/SRRC), <14 dBm (CE)
5.1GHz: <23 dBm (FCC/SRRC/CE/MIC)
5.2GHz: <30 dBm (FCC), <23 dBm (SRRC/CE/MIC)
5.5GHz: <30 dBm (FCC), <23 dBm (CE/MIC)
Power 11 W
Input Voltage External Power Input Port: 6-18 V
DC-IN Power Input Port: 6-18 V
Output Voltage External Power Supply Port: 6-18 V
Input Audio Format
SDI embedded, HDMI embedded
Max Bitrate 50Mbps
Operating Temperature -10° to 45° C (14° to 113° F)
FCC Compliance Notice
Supplier’s Declaration of Conformity
Product name: DJI Video Transmitter
Model Number:
TX3
Responsible Party: DJI Technology, Inc.
Responsible Party Address: 201 S. Victory Blvd., Burbank, CA 91502
Website: www.dji.com
We, DJI Technology, Inc., being the responsible party, declares that the above mentioned
model was tested to demonstrate complying with all applicable FCC rules and regulations.
Table des matières
Autres manuels dji Extenseur
