dji OSMO Manuel utilisateur
OSMO
2015.10
V1.0
User Manual
2
©2015 DJI. All Rights Reserved.
Searching for Keywords
Search for keywords such as “battery” and “install” to nd a topic. If you are using Adobe
Acrobat Reader to read this document, press Ctrl+F (Windows) or Command+F (Mac) to
begin a search.
Navigating to a Topic
View a complete list of topics in the table of contents. Click on a topic to navigate to that
section.
Using this Manual
Legend
Important Tips
Install the DJI GO App
Search for ‘DJI GO’ on the App Store or Google Play and install
the app on your mobile device.
DJI GO supports iOS 8.0 (or later) or Android 4.1.2 (or later).
©2015 DJI. All Rights Reserved.
3
Contents
Using this Manual 2
Legend 2
InstalltheDJIGOApp 2
Introduction 4
Getting Started 5
IntelligentBattery 5
MountingyourMobileDevice 7
RemovingtheMobileDeviceHolder 8
ExternalMounts 8
UnlockingtheGimbal 9
LockingtheGimbal 10
Using the Osmo 10
ControlsandOperations 10
OperationModes 13
CompatibilitywiththeZenmuseX3fortheInspire1 15
DJI GO App 15
Download 15
ConnectingtotheDJIGOApp 15
KeyPages 16
Upgrading the Firmware 21
UsingtheDJIGOApp 21
UsingaMicroSDCard 22
Maintenance 22
Specifications 23
Troubleshooting 25
Introduction
4
©2015 DJI. All Rights Reserved.
Introduction
The Osmo is a 3-axis handheld gimbal and camera that can capture 12MP still photos and
4K video with onboard or external sound recording. Its light and ergonomic design with
buttons at your ngertips form a powerful and personal one-handed lming device. The DJI
GO app complements the Osmo with shooting modes such as timelapse, auto panorama,
long exposure and slow motion.
Equipped with 3-axis stabilization and SmoothTrack technology, the gimbal compensates for
natural arm movements and smooths out transitions. Finer operations can be done with the
joystick, while instant positioning of the camera can be made directly with your other hand.
The camera tilts across a 170 degree range and has a pan rotation of 640 degrees.
The DJI Rosette Mount on the side of the handle allows your mobile device to be mounted as
a live HD viewnder, and supports external devices including vehicle mounts and tripods for
specialized lming applications.
At a Glance:
[17] Micro SD Card Slot
[18] Battery Cover
[19] Lanyard Hole
[20] DJI Rosette Mount
[21] Trigger
[22] External Microphone Input
[23] Built-in Microphone
[1]
[2]
[3]
[5]
[6]
[7]
[9]
[10]
[11]
[13]
[14]
[12]
[8]
[4]
[15]
[16]
[17]
[18]
[19]
[21]
[22]
[23]
[20]
[1] Tilt Motor
[2] Micro USB Port
[3] Pan Motor
[4] Pan Axis Lock
[5] Gimbal Lock
[6] System Status Indicator
[7] Power Switch
[8] Record Button
[9] Mobile Device Holder
[10] Shutter Button
[11] Joystick
[12] Camera Status Indicator
[13] Roll Motor
[14] Camera
[15] Air Vents
[16] UV Filter
Getting Started
©2015 DJI. All Rights Reserved.
5
Getting Started
Intelligent Battery
The 980 mAh Intelligent Battery can power the Osmo for about 65 minutes.
Intelligent Battery Functions
Battery Balancing Balances the voltage of each cell during charging.
Overcurrent Protection Stops charging if the charging current is too large.
Overcharge Protection Stops charging if its voltage is too high.
Over-discharge Protection Stops discharging if its voltage is too low.
Short Circuit Protection Cuts the power supply if a short circuit is detected.
Temperature Control Stops charging if the core temperature falls below 59°F (15°C)
or exceeds 104°F (40°C).
Battery Level Display The battery level is displayed in the DJI GO app.
Battery Specications
Model HB01-522365
Type LiPo
Capacity 980 mAh
Energy 10.8 Wh
Voltage 11.1 V
Charging Temperature 59° to 104° F (15° to 40° C)
Operating Temperature 14° to 122° F (-10° to 50° C)
Be sure to fully charge the Intelligent Battery for the rst time to activate it.
Read the user manual, Intelligent Battery Safety Guidelines before use. The user
takes full responsibility for all operations and usage.
Charging the Battery
Connect the battery charger to a power outlet using the provided cable. The LED indicator on
the battery charger will glow green.
Place the battery into the battery charger. The LED indicator will become red when charging.
It will take approximately an hour for the battery to be fully charged, at which point the LED
indicator will change from red to green.
Getting Started
OSMO User Manual
6
©2015 DJI. All Rights Reserved.
Battery Charger Specications
Model SOY015A
-
1260120
Input 100-240 V, 50/60 Hz
Output 12.6 V, 1.2 A
Inserting the Battery
Slide the locking switch at the base of the Osmo to open the battery cover. Insert the battery
and lock the battery cover.
Only charge the battery with the provide d battery charger. DJI takes no responsibility
for accidents caused by the use of non-DJI battery chargers.
Remove the battery from the charger unless it is charging to prevent battery discharging.
Removing the Battery
Slide the locking switch at the base of the Osmo to open the battery cover. Push the red
safety hook away from the battery to let it pop up, and then remove the battery.
Getting Started
OSMO User Manual
©2015 DJI. All Rights Reserved.
7
Mounting your Mobile Device
1. Unfold the two arms on the mobile device holder.
2. Adjust the pads to the desired position.
3. Place one end of your mobile device into the arms.
4. Extend the arms so that your entire mobile device is seated in the mobile device holder.
5. Rotate your mobile device to the desired position.
Getting Started
OSMO User Manual
8
©2015 DJI. All Rights Reserved.
Removing the Mobile Device Holder
The mobile device holder can be removed by rotating the knob counterclockwise.
It is recommended to install the cap for the DJI Rosette Mount when it is not in use.
External Mounts
Different types of external mounts can be attached to the DJI Rosette Mount for unique
applications.
Universal Mount
Used to mount external devices such as a
microphone or ashlight.
Extension Rod
Good for taking group seles, overhead shots
or reaching into small spaces.
Tripod
For stationary shots that require steady
footage.
Bike Mount
Used to mount the Osmo on a bicycle.
Getting Started
OSMO User Manual
©2015 DJI. All Rights Reserved.
9
Visit the ofcial DJI Store (http://store.dji.com) to learn more.
Vehicle Mount
Triple suction cup mount makes it ideal for
mounting on top of or on the rear window of
moving vehicles.
Straight Extension Arm
Used to attach up to three other mounts at the
same time.
Unlocking the Gimbal
To protect the gimbal, the three motor axes are locked in place. To unlock the gimbal:
1. Gently rotate the tilt motor until it can rotate freely. Similarly, rotate the roll motor.
Be sure to unlock the tilt motor before unlocking the roll motor to avoid damaging
the camera lens.
Rotate the motors just enough to allow free motion.
2. Slide the Pan Axis Lock upwards to unlock the pan axis.
PanAxisLock
OSMO User Manual
10
©2015 DJI. All Rights Reserved.
Getting Started / Using the Osmo
You can choose to unlock the gimbal before or after the Osmo is turned on. It is
recommended to unlock the gimbal before powering on the Osmo.
The Osmo will beep slowly if the gimbal is locked after it is turned on. This means
the camera is working normally but the gimbal is shut off.
If you need to unlock the gimbal after it is turned on, you must rotate the pan motor
after unlocking the tilt motor and pan motor to reactivate the gimbal.
Using the Osmo
Controls and Operations
The gimbal anticipates handle movement to smooth out pan and tilt transitions, and uses
SmoothTrack technology to reduce camera shakes from natural arm movements. Additionally,
there are buttons on the front and back of the handle that allow for finer control over the
gimbal and camera. All of the buttons and controls are described below.
Locking the Gimbal
Pull the pan axis lock down and rotate the pan axis to the locked position (until it cannot
rotate any further), and then adjust the roll motor and tilt motor in order to lock them in place.
You can lock and unlock the gimbal while the Osmo is turned on. Quickly tap the
trigger twice to reactivate the motors after they are unlocked.
Hold the Osmo steady and upright while it is starting up.
[1] Power Switch
To turn on the Osmo, pull the power switch down and then release it.
Pulling the power switch again will cause the Osmo to go in or out of sleep mode.
To turn off the Osmo, pull the power switch down and hold for 1.5 seconds.
PowerSwitch
Autres manuels pour OSMO
10
Table des matières
Manuels Caméra couleur populaires d'autres marques
Gadgets and Gear
Gadgets and Gear Desktop Spy Clock Hidden Camera Instructions de montage
General Security
General Security MTX600HQ Manuel utilisateur
WofVision
WofVision EYE-12 Manuel utilisateur
Leopard
Leopard LI-1080PTZOV Manuel utilisateur
Microscan
Microscan QX Hawk Manuel utilisateur
Imperx
Imperx CHEETAH C4080M Instructions d'utilisation